• Journal of Microbiology
• /
• v.34 no.3
• /
• pp.225-228
• /
• 1996

The cellular fatty acid methyl esters (FAMEs) analysis data obtained for clusters defined at a Euclidian distance of 17.5, in the classification of lactic acid bacteria isolated from kimchi, described by Lee et al. (4), was used for the identification of 79 Leuconostoc isolates. The test strains were isolated using a selective isolation medium specific for the genus Leuconostoc. These strains were then characterized according to their fatty acid profiles. The results show that all seventy nine test strains were identified to the known Leuconostoc clusters B, C, and D. Cluster B had the highest relative amount of the saturated fatty acid 16 : 0. The saturated fatty acid 16 : 0 and summed feature 9 were found as a major components in cluster C, which had a higher level of summed feature 9 than cluster B. Cluster D is characterized by the highest relative amount of the unsaturated fatty acid 18 : 1 w9c. It is suggested that FAMEs analysis can be successfully applied in the identification of lactic acid bacteria isolated from kimchi.

• The Korean Journal of Pain
• /
• v.19 no.2
• /
• pp.249-252
• /
• 2006

Postlaminectomy syndrome is characterized by persistent low back pain and radiculopathy of the legs after surgery of the spine. Pseudomeningocele is an uncommon cause of postlaminectomy syndrome; it is characterized by an extradural collection of cerebrospinal fluid (CSF) without dural covering, resulting from unrecognized dural tears at the time of lumbar surgery. In most cases, surgery to repair a pseudomeningocele is recommended. However if surgical treatment does not yield symptomatic relief, then conservative treatment should be considered. We treated a patient with a pseudomeningocele after spine surgery in which selective transforaminal epidural block produced long-term relief of symptoms. Here we describe the management of this patient.

• Asian Journal for Public Opinion Research
• /
• v.5 no.4
• /
• pp.285-301
• /
• 2018

There have been many studies that applied a data-driven analysis method to social media data, and some have even argued that this method can replace traditional polls. However, some other studies show contradictory results. There seems to be no consensus as to the methodology of data collection and analysis. But as social media-based election research continues and the data collection and analysis methodology keep developing, we need to review the key points of the controversy and to identify ways to go forward. Although some previous studies have reviewed the strengths and weaknesses of the social media-based election studies, they focused on predictive performance and did not adequately address other studies that utilized social media to address other issues related with public opinion during elections, such as public agenda or information diffusion. This paper tries to find out what information we can get by utilizing social media data and what limitations social media data has. Also, we review the various attempts to overcome these limitations. Finally, we suggest how we can best utilize social media data in understanding public opinion during elections.

• Fashion & Textile Research Journal
• /
• v.22 no.1
• /
• pp.11-24
• /
• 2020

This research examines pattern production of 3 men's costumes in the second half of 19th century by 3D reconstruction to reveal technical aspects of mail costumes. The steps are as follows. First, an examination of selective type according to research study. Second, a pattern analysis of 3 historical male tops of 19th century referred to 9 pattern books of the France National Library collection. Third, a categorized type analysis that referred to paintings of the Musée d'Orsay collection. Fourth, a measurement and structure research of 3 historical garments of Fashion and Textile Museum collection. Fifth, the pattern making and fitting by 3D simulation. Research discussed the following subjects and results. First, main type of men's coat can be categorized by frac, redingote, jaquette, and veston. Second, the male costume pattern contained in pattern books was researched along with distinguished silhouettes and structures; X silhouette for frac and redingote, H silhouette for jaquette, and straight box silhouette for veston. Third, based on the analysis of representative type of men's costume per period conducted previous studies, 2 redingotes and a jaquette in the museum were selected and compared to other data such as image materials. Last, the following process was conducted for reconstruction; 'Drawing diagram-Primary pattern drafting by measurement value-3D virtual fitting-Checking the fit-Modification and complement'. We also obtained a 3D virtual reconstruction and a 2D research pattern that suggested a costume pattern by each type along with 3D reconstruction that included insights for male coat techniques of 19th century France.

• Journal of the Korean Society for information Management
• /
• v.37 no.3
• /
• pp.25-50
• /
• 2020

Since big data platform services for the public library began January 1, 2016, libraries have used big data to improve their work performance. This paper aims to examine the use cases of library big data and attempts to draw improvement plan to improve the effectiveness of library big data. For this purpose, first, we examine big data used while utilizing the library big data platform, the usage pattern of big data and services/policies drawn by big data analysis. Next, the limitations and advantages of the library big data platform are examined by comparing the data analysis of the integrated library management system (ILUS) currently used in public libraries and data analysis through the library big data platform. As a result of case analysis, big data usage patterns were found program planning and execution, collection, collection, and other types, and services/policies were summarized as customizing bookshelf themes for the book curation and reading promotion program, increasing collection utilization, and building a collection based on special topics. and disclosure of loan status data. As a result of the comparative analysis, ILUS is specialized in statistical analysis of library collection unit, and the big data platform enables selective and flexible analysis according to various attributes (age, gender, region, time of loan, etc.) reducing analysis time. Finally, the limitations revealed in case analysis and comparative analysis are summarized and suggestions for improvement are presented.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1993.05a
• /
• pp.64-69
• /
• 1993

The solar energy collection of a passive solar system depends on the finish of collecting surfaces. In this study, the test models of T.W system with different wall surface finishes were constructed, and the temperature distribution through the models was monitored. At the same time, a computer program based on F.D.M was developed in order to simulate various surface finishes. The difference of indoor temperature between the model with white color finish ($\alpha$=0.25) and the one with black color finish ($\alpha$=0.95) was about 1$0^{\circ}C$. For the wall with selective coating, the indoor temperature was 4-5$^{\circ}C$ higher than that of red brick wall, and 3-4$^{\circ}C$ higher than that of wall with black paint.

• Journal of Electrochemical Science and Technology
• /
• v.1 no.2
• /
• pp.69-74
• /
• 2010

Methodologies to improve photovoltaic performance of dye-sensitized solar cell (DSSC) are reviewed. DSSC is usually composed of a dye-adsorbed $TiO_2$ photoanode, a tri-iodide/iodide redox electrolyte and a Pt counter electrode. Among the photovoltaic parameters of short-circuit photocurrent density, open-circuit voltage and fill factor, short-circuit photocurrent density is the collective measure of light harvesting, charge separation and charge collection efficiencies. Internal quantum efficiency is known to reach almost 100%, which indicates that charge separation occurs without loss by recombination. Thus, light harvesting efficiency plays an important role in improvement of photocurrent. In this paper, technologies to improve light harvesting efficiency, including surface area improvement by nano-dispersion, size-dependent light scattering efficiency, bi-functional nano material, panchromatic absorption by selective positioning of three different dyes and transparent conductive oxide (TCO)-less DSSC, are introduced.

• Journal of the Korea Safety Management & Science
• /
• v.24 no.2
• /
• pp.1-9
• /
• 2022

In korea, 500MW standard coal fired power plants were designed and operated for the initial base load, so facility stability was prioritized from facility problem to treatment, but now we needed to research for minimizing greehouse gas emissions at the operation of coal fired power plants. research on various facilities and technologies was actively conducted to reduce environment pollutants was drastically reduced, but research and attempts on coping measures in the event of a reduction facility problem were in sufficient. this study considered investigated ways to minimized pollutants by quickly responding to logic development and application of the load runback concept in case of serious problems with environmental pollutant reduction facilities such as NOx reduction selective catalytic reduction facilities, SOx reduction wet flue gas desulpherisation facilities, and TSP(Total Suspended Particles) collection low temperature electric precipitator.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.184-184
• /
• 2012

Recently, InGaN/GaN multi-quantum well grown on GaN pyramid structures have attracted much attention due to their hybrid characteristics of quantum well, quantum wire, and quantum dot. This gives us broad band emission which will be useful for phosphor-free white light emitting diode. On the other hand, by using quantum dot emission on top of the pyramid, site selective single photon source could be realized. However, these structures still have several limitations for the single photon source. For instance, the quantum efficiency of quantum dot emission should be improved further. As detection systems have limited numerical aperture, collection efficiency is also important issue. It has been known that micro-cavities can be utilized to modify the radiative decay rate and to control the radiation pattern of quantum dot. Researchers have also been interested in nano-cavities using localized surface plasmon. Although the plasmonic cavities have small quality factor due to high loss of metal, it could have small mode volume because plasmonic wavelength is much smaller than the wavelength in the dielectric cavities. In this work, we used localized surface plasmon to improve efficiency of InGaN qunatum dot as a single photon emitter. We could easily get the localized surface plasmon mode after deposit the metal thin film because lnGaN/GaN multi quantum well has the pyramidal geometry. With numerical simulation (i.e., Finite Difference Time Domain method), we observed highly enhanced decay rate and modified radiation pattern. To confirm these localized surface plasmon effect experimentally, we deposited metal thin films on InGaN/GaN pyramid structures using e-beam deposition. Then, photoluminescence and time-resolved photoluminescence were carried out to measure the improvement of radiative decay rate (Purcell factor). By carrying out cathodoluminescence (CL) experiments, spatial-resolved CL images could also be obtained. As we mentioned before, collection efficiency is also important issue to make an efficient single photon emitter. To confirm the radiation pattern of quantum dot, Fourier optics system was used to capture the angular property of emission. We believe that highly focused localized surface plasmon around site-selective InGaN quantum dot could be a feasible single photon emitter.

• Journal of Convergence for Information Technology
• /
• v.9 no.1
• /
• pp.45-53
• /
• 2019

We face problems from excessive information served with websites in this rapidly changing information era. We find little information useful and much useless and spend a lot of time to select information needed. Many websites including search engines use web crawling in order to make data updated. Web crawling is usually used to generate copies of all the pages of visited sites. Search engines index the pages for faster searching. With regard to data collection for wholesale and order information changing in realtime, the keyword-oriented web data collection is not adequate. The alternative for selective collection of web information in realtime has not been suggested. In this paper, we propose a method of collecting information of restricted web sites by using Web crawling distributed monitoring system (R-WCMS) and estimating collection time through detailed analysis of data and storing them in parallel system. Experimental results show that web site information retrieval is applied to the proposed model, reducing the time of 15-17%.