• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.180-183
• /
• 2003

In this research, on-line model for prediction of effective strain distribution hi strip on finishing mill process is prescribed. It has been developed using several selected non-dimensional parameters and previously made average effective strain model via series of finite element process simulations, $\Delta$$\varepsilon$ was introduced to describe the effective strain distribution in strip. To confirm adequate non-dimensional variables uniqueness test was done. And to decide the order of polynomial in on-line model equation tendency test for each variables was done. The prediction accuracy of the proposed model is examined through comparison with finite element calculation results.

• Archives of Pharmacal Research
• /
• v.14 no.2
• /
• pp.109-113
• /
• 1991

Two types of aggressive behavior were produced by selective breeding in ICR mimce. NC900 line mice exhibited high level of species-typical, isolation-induced aggression, conversely, NC100 line mice exhibited little aggression. The present study tested the hypothesis that these differences involved brain monoamine systems. Comparisons of microdissected samples from various brain regions showed that NC100 line mice had significantly lower concentrations of dopamine. DOPAC and HVA in the nucleus accumbens (NAB) and caudate nucleus (NCU) than NC900 line. Homogenate binding studies demonstrated that NC100 mice had significantly increased density of $D_1$ dopamine receptor, but not $D_2$ dopamine receptor in the caudate nucleus. These results support the hypothesis that central dopamine pathways play an important role in modulating the genetically selected differences in aggressive behavior, and of which intensity differs from TEX>$D_1$\;and\;$D_2$ dopamine receptors.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.707-711
• /
• 1989

This system exchange half-duplex serial data at 1200 baud by FSK modulating a carrier frequency at 200KHz over the 110V A.C. power line. Transmitter output voltage to A.C. line is 4V p-p and line sensitivity is selected 2.54mV because CISPR Noise limitation is $66dB{\mu}V$ at 150 ${\sim}$ 500KHz. The designed and realized system has abtained system margin of 58 dB and probability of error, Pe = $1.78{\times}10^{-7}$ was obtained

• Korean Journal of Human Ecology
• /
• v.2 no.1
• /
• pp.110-113
• /
• 1999

Clothing shape is principally described in seven factors that are composed of clothing design, clothing material, clothing size, pattern design, sewing method and body motion etc. The aims of this study was to measurement out-line space-shape variation of clothing fitness with body by using the image processing. The subjects for direct anthropometric measurements were 248 female college students aged from 19 to 22. The data were statistically analyzed by principal analysis and cluster analysis. The results selected one somatotype. for the out-line space-shape variation of clothing fitness with body, there dimensional clothing shapes measured. and cross-sectional clothing shape obtained by the measurement was considered to be space wave form. The out-line space-shape variation of clothing fitness with body was observed between the node number and amplitudes of clothing wave form, and node number was determined at the maxim of space-shape amplitude, and the space-shape amplitudes have related with aspect ratio of cross-sectional shape. (Korean J of Human Ecology 2(1) :110-113, 1999)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05c
• /
• pp.59-61
• /
• 2001

Polymeric suspended insulators for the electric track line have been developed. The main elements to design polymeric insulators are the insulation ability related with materials of FRP core and housing, and the optimal structure related with fitting parts and interface characteristics. To confirm the design fitness of insulator samples the electric field distribution by FEM and mechanical stress distribution by NASTRAN program was analysed with housing shed shapes and fitting structure. The leakage distance and breakage voltage properties which are core parameters to determine electric insulation ability are selected according to the requirement values of user specification, then the power frequency wet withstand voltage was specified above 22kV and the leakage distance was required above 290mm. The contamination condition of the electric track line was the heavy class according to IEC 815 in order to retain the enough safety margin against overvoltages.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.1041-1043
• /
• 1997

When a new transmission line is planned to construct, the system voltage and the conductor size of the transmission line should be decided by both economical and technical point of view. This paper presents a methodology to determine the optimal voltage for upgrading the transmission system voltage of existing the extra high voltage grid network by meeting the requirements of the transmission cost minimization as well as technical constraints of thermal limit and stability limit in the transmission line. As a case study, calculated are optimal voltages versus distance and capacity of a practically applicable transmission line with 4 bundles 2 circuits. By this study 400kV was selected as the next higher voltage for the existing 220kV Libyan grid network.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.953-954
• /
• 2006

Guaranteeing survivability is the most important issue in designing and operating optical transmission network. For dual system of optical transmission network, there should be two routes of the optical to prepare an error in one cable route. If a route is selected based on the standard of unused optical core when choosing an optical cable, dual optical cable routes could be installed in duplicated line. This paper simulates the installation of duplicated line when designing an optical transmission network, detects the status of duplicated line that could happen during transfer construction and switching and accomplishes a system that can confirm the location based on a map.

• Publications of The Korean Astronomical Society
• /
• v.29 no.3
• /
• pp.35-44
• /
• 2014

In ground-based astronomical spectroscopic observations, there are many telluric absorption lines that are laid on the spectra of celestial objects. To study the physical properties of the celestial objects with these contaminated spectra, the telluric lines should be removed. A conventional method for removing the telluric lines is using the standard stellar spectrum as telluric line. In this paper, we introduce a technique to calculate synthetic telluric spectra and use them to remove telluric lines from a spectrum of a celestial object. We used Line-by-Line Radiative Transfer Model (LBLRTM) for calculating a synthetic spectrum and selected Michelson Interferometer for Passive Atmospheric Sounding (MIPAS) model as atmospheric model. We apply our method to some spectra obtained by Bohyunsan Observatory Echelle Spectrograph (BOES) to show that the telluric lines are well removed from the observed spectra by our model within an accuracy of 2% which is close to the 1-sigma rms of the original spectra.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.397-398
• /
• 2007

In this paper, we have verified the applicability of the line-clustering segmentation method to steel-tube X-ray images. Image data is partitioned into three regions on the base of vertical line edge detection. Parameters for necessary condition, such as neighborlity, similarity and directional neighbor correlation coefficients, proposed in that method is calculated and applied to such selected regions separately Segmental features at each region is extracted statistically and functional classification is clustered by the point or space process. The analyzed data and experimental results show that the line-clustering segmentation method has a high applicability to X-ray image.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.4
• /
• pp.69-78
• /
• 2004

The purpose of this study was to investigate the ways and possibility of on-line environmental education(EE) for a sustainable future. For the purpose, the researchers reviewed and analyzed 22 Korean and 41 foreign Internet sites related EE. Then, the researchers selected five Internet sites in Korea, U.S.A., UK, New Zealand, and Australia. Researchers analyzed these five sites in depth, specially in the aspect of the education for a sustainable future/development. This analysis indicated that 'The Globe Programme'(UK) and 'Global Education'(Australia) sites contain more contents and activities related sustainable future/development then other three sites. On the basis of analysis, the researchers offered several recommendations for on-line EE for a sustainable future.