• Smart Structures and Systems
• /
• v.2 no.2
• /
• pp.115-126
• /
• 2006

The Terra-Scope system is an affordable 4-D down-hole seismic monitoring system based on independent, microprocessor-controlled sensor Pods. The Pods are nominally 50 mm in diameter, and about 120 mm long. They are expected to cost approximately $6000 each. An internal 16-bit, extremely low power MCU controls all aspects of instrumentation, eight programmable gain amplifiers, and local signal storage. Each Pod measures 3-D acceleration, tilt, azimuth, temperature, and other parametric variables such as pore water pressure and pH. Each Pod communicates over a standard digital bus (RS-485) through a completely web-based GUI interface, and has a power consumption of less than 400 mW. Three-dimensional acceleration is measured by pure digital force-balance MEMS-based accelerometers. These accelerometers have a dynamic range of more than 115 dB and a frequency response from DC to 1000 Hz with a noise floor of less than $30ng_{rms}/{\surd}Hz$. Accelerations above 0.2 g are measured by a second set of MEMS-based accelerometers, giving a full 160 dB dynamic range. This paper describes the system design and the cooperative shared-time scheduler implemented for this project. Restraints accounted for include multiple data streams, integration of multiple free agents, interaction with the asynchronous world, and hardened time stamping of accelerometer data. The prototype of the device is currently undergoing evaluation. The first array will be installed in the spring of 2006.

• Smart Structures and Systems
• /
• v.31 no.3
• /
• pp.275-281
• /
• 2023

In recent years, technological developments have rapidly increased the number of complex structures and equipment in the industrial. Accordingly, the prognostics and health monitoring (PHM) technology has become significant. The safety assessment of industrial sites requires data obtained by installing a number of sensors in the structure. Therefore, digital twin technology, which forms the core of the Fourth Industrial Revolution, is attracting attention in the safety field. The research on digital twin technology of structures subjected to seismic loads has been conducted recently. Hence, this study proposes a digital twin system that estimates the responses and arbitrary load in real time by utilizing the minimum sensor to a pipe that receives a seismic and arbitrary load. To construct the digital twin system, a finite-element model was created considering the dynamic characteristics of the pipe system, and then updating the finite-element model. In addition, the calculation speed was improved using a finite-element model that applied the reduced-order modeling (ROM) technology to achieve real-time performance. The constructed digital twin system successfully and rapidly estimated the load and the point where the sensor was not attached. The accuracy of the constructed digital twin system was verified by comparing the response of the digital twin model with that derived by using the load estimated from the digital twin model as input in the finite-element model.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10a
• /
• pp.130-131
• /
• 2007

Wireless Sensor Network typically incorporates diverse applications within the same network. A sensor node may have multiple sensors i.e. light, temperature, seismic etc with different transmission characteristics. Each application has different characteristics and requirements in terms of transmission rates, bandwidth, packet loss and delay demands may be initiated towards the sink. In this paper we propose Heterogeneous Traffic Oriented Rate Control Protocol (HTRCP) which ensures efficient rate control for diverse applications according to the priority specified by the sink. Moreover. HTRCP ensures the node priority based hop by hop dynamic rate adjustment for high link utilization.

• Structural Engineering and Mechanics
• /
• v.13 no.2
• /
• pp.117-134
• /
• 2002

This paper presents a computational method for a confidence region of identified parameters which are affected by measurement noise and error contained in prescribed parameters. The method is based on sensitivities of the identified parameters with respect to model parameter error and measurement noise along with the law of error propagation. By conducting numerical experiments on simple models, it is confirmed that the confidence region coincides well with the results of numerical experiments. Furthermore, the optimum arrangement of sensor locations is evaluated when uncertainty exists in prescribed parameters, based on the concept that square sum of coefficients of variations of identified results attains minimum. Good agreement of the theoretical results with those of numerical simulation confirmed validity of the theory.

• Journal of Sensor Science and Technology
• /
• v.6 no.6
• /
• pp.430-436
• /
• 1997

A piezoresistive acceleration sensor for 30 G has been fabricated by silicon micromachining method using SDB(silicon direct bonding) wafer. The structure of the piezoresistive acceleration sensor consists of a seismic square pillar type mass and four beams. This structure was fabricated by reactive ion etching and chemical etching using KOH-etchant. The rectangular square structure is used in order to compensate the deformation of the edges due to underetching. The fabricated sensor showed a linear output voltage-acceleration characteristics and its sensitivity was about $88{\mu}V/V{\cdot}g$ from 0 to 10 G.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.3
• /
• pp.411-417
• /
• 2020

Therefore, it was agreed that an earthquake monitoring station should be set up within the site of Handong University by analyzing drilling data and Disaster such as earthquakes is urgently needed to prepare for earthquakes in that people's lives and national development depend on the nation's ability to manage disasters. Many experts say that the Korean Peninsula is also under the influence of earthquakes and is not a safe zone for earthquakes. A seismological observatory will be established in Pohang to monitor ground sensors and study seismic characteristics through the task of "Development of Smart Sensor-based Intelligent Information Platform in Earthquake Region." Therefore, it was agreed to set up a seismological observatory within the site of Handong University by analyzing drilling data and conducting on-site surveys in northern Pohang, which were heavily damaged by liquefaction and earthquakes. In this study, it was decided to make a comprehensive judgment by considering the geological characteristics of the site, whether it can perform functions, and the convenience of construction and maintenance for the final site of the seismological observatory discussed with Handong University. After completing a feasibility review on selecting a site for Handong University, we will establish a seismological observatory and actively utilize it for seismic research using data from alarm issuance and seismic data in the event of a future earthquake.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.22 no.3
• /
• pp.201-210
• /
• 2018

The improvement in computing systems and sensor technologies devotes to conduct data-driven structural health monitoring algorithms for existing civil infrastructures. Despite of the development of techniques, the uncertainty oriented from the measurement results in the discrepancy to the actual structural parameters and let engineers or decision makers hesitate to adopt such techniques. Many studies have shown that the modal identification results can be affected by the uncertainties due to the applied methods and the types of loading. This paper aims to compare the performance of modal identification methods using Structural Modal Identification Toolsuite (SMIT) which has been developed to facilitate multiple identification methods with a user-friendly designed platform. The data fed into SMIT processes three stages for the comprehensive identification including preprocessing, eigenvalue estimation, and post-processing. The seismic and white noise response for shear frame model was obtained from numerical simulation. The identified modal parameters is compared to the actual modal parameters. In order to improve the quality of coherence in identified modal parameters, several hurdles including modal phase collinearity and extended modal amplitude coherence were introduced. Numerical simulation conducted on the 5 dof shear frame model were used to validate the effectiveness of using these parameters.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.92-104
• /
• 2005

Over the past decade, major advances have occurred in both understanding and practice with regard to assessment and mitigation of hazard area associated with seismically induced soil liquefaction. In this paper, assessment of liquefaction resistance of soil are reviewed from the recent researches. In addition site characteristics investigation methods and tests for seismic design and liquefaction analysis are reviewed. Finally, introduction and characteristics of remedial measures against soil liquefaction are reviewed briefly.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.5
• /
• pp.335-349
• /
• 2021

As the frequency of seismic disasters in Korea has increased rapidly since 2016, interest in systematic maintenance and crisis response technologies for structures has been increasing. A data-based leading management system of Lifeline facilities is important for rapid disaster response. In particular, the water supply network, one of the major Lifeline facilities, must be operated by a systematic maintenance and emergency response system for stable water supply. As one of the methods for this, the importance of the structural health monitoring(SHM) technology has emerged as the recent continuous development of sensor and signal processing technology. Among the various types of SHM, because all machines generate vibration, research and application on the efficiency of a vibration-based SHM are expanding. This paper reviews a vibration-based pipeline SHM system for seismic disaster response of water supply pipelines including types of vibration sensors, the current status of vibration signal processing technology and domestic major research on structural pipeline health monitoring, additionally with application plan for existing pipeline operation system.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.169-172
• /
• 2005

Today, peoples have much interest about safety while an abnormal weather phenomenon is weighted increased. R.C buildings are consisting of main loaded members. Concrete are brittle materials and they are which come to brittle fracture rapidly by progress of cracks. With the exchange of such research in inside and outside of the country, the structure measurement method of having used PZT and the optical fiber (FBG) will be the actual condition which has accomplished the stock. Specially, seismic activity that gives damage to construction and members happens in on time. Therefore, the purpose of this study is the fundamental research which detects damagesof main members using the compound sensor which consisted of the radio sensors of resistance, PZT, and FM system.