• 제목/요약/키워드: seismic reflection data

검색결과 160건 처리시간 0.042초

터널 지보구조 진단을 위한 초음파 반사법을 이용한 3차원 모형실험 연구 (Study on 3-D Physical Modeling for the Inspection of Tunnel Lining Structure by using Ultrasonic Reflection Method)

  • 김중열;김유성;신용석;현혜자
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2002년도 봄 학술발표회 논문집
    • /
    • pp.221-228
    • /
    • 2002
  • Thickness of concrete lining, voids at the back of lining or shotcrete are very important elements for inspecting the safety of tunnels. Therefore, the inspection of tunnel lining structure means to investigate the inner layer boundaries of the structure. For this purpose, seismic reflection survey is the most desirable method if it works in good conditions. However, the conventional seismic reflection method can not be properly used for investigating thin layers in the lining structure. In other words, to detect the inner boundaries, it is desirable for the wavelength of source to be less than the thickness of each layer and for the receiver to be capable of detecting high frequency(ultrasonic) signals. To this end, new appropriate source and receiver devices should be developed above all for the ultrasonic reflection survey. This paper deals primarily with the development of source and receiver devices which are essential parts of field measuring system. Interests are above all centered in both the radiation pattern, energy, frequency content of the source and the directional sensitivity of the receiver. With these newly devised ones, ultrasonic physical modeling has been performed on 3-D physical model composed of bakelite, water-proof and concrete, The measured seismograms showed a clear separation of wave arrivals reflected from each layer boundary. Furthermore, it is noteworthy that reflection events from the bottom of concrete below water-proof could be also observed. This result demonstrates the usefulness of the both devices that can be applied to benefit the ultrasonic reflection survey. Future research is being focus on dealing with at first an optimal configuration of source and receiver devices well coupled to tunnel wall, and further an efficient data control system of practical use.

  • PDF

가스 하이드레이트 자료에 대한 중합전 키르히호프 심도 구조보정 (Kirchhoff prestack depth migration for gas hydrate seismic data set)

  • 도안 후이 히엔;장성형;김영완;서상용
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2007년도 춘계학술대회
    • /
    • pp.493-496
    • /
    • 2007
  • Korean Institute of Geosciences and Mineral Resources (KIGAM) has studied on gas hydrate in the Ulleung Basin, East sea of Korea since 1997. Most of all, a evidence for existence of gas hydrate, possible new energy resources, in seismic reflection data is bottom simulating reflection (BSR) which parallel to the sea bottom. Here we conducted the conventional data processing for gas hydrate data and Kirchhoff prestack depth migration. Kirchhoff migration is widely used for pre- and post-stack migration might be helpful to better image as well as to get the geological information. The processed stack image by GEOBIT showed some geological structures such as faults and shallow gas hydrate seeping area indicated by strong BSR. The BSR in the stack image showed at TWT 3.07s between shot gather No 3940 to No 4120. The estimated gas seeping area occurred at the shot point No 4187 to No 4203 and it seems to have some minor faults at shot point No 3735, 3791, 3947 and 4120. According to the result of depth migration, the BSR showed as 2.3km below the sea bottom.

  • PDF

탄성파 자료를 이용한 BSR 부근의 속도 분석 (P-wave velocity analysis around BSR depth using surface and ocean bottom seismic data)

  • 김병엽;구남형;유동근
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2007년도 공동학술대회 논문집
    • /
    • pp.151-156
    • /
    • 2007
  • In December 2006, 2D surface streamer and Ocean Bottom Seismometer (OBS) data were acquired in the Ulleung basin in Korea where strong Bottom Simulating Reflectors (BSR) were shown as a result of 2D and 3D multichannel (MCS) reflection survey. The aim of this study is to provide another reliable source for estimating P wave velocity around BSR depth using OBS data in addition to velocity information from 2D surface seismic data. Four OBSs were deployed and four 20-km shot lines which pass two OBSs respectively were designed. To derive P wave velocity profile, interactive interval velocity analysis using ${\tau}$-p trajectory matching method (Kumar, 2005) was used for OBS data and semblance analysis was used for surface data. The seismic profiles cross the OBS instruments in two different directions yield recordings for four different azimuths. This raised the confidence for the results. All velocity profiles in the vicinity of BSR depth of four OBS sites show almost definite velocity changes which we could consider as upper BSR and free gas layer. Making comparison between velocity from OBS and that from 2D seismic semblance velocity analysis gives consistency in result.

  • PDF

다중펄스 방법을 이용한 디컨벌루션 (The Seismic Multipulse Deconvolution)

  • 손호웅
    • 자원환경지질
    • /
    • 제28권5호
    • /
    • pp.487-491
    • /
    • 1995
  • 음성신호를 임펄스 반응으로 압축시키는데 사용되는 선형예측코드의 다중펄스 방법을 다중반사파를 제거시킬수 있도록 개선시켰다. 다중반사파는 층사이에서 연속 반사에 의해 발생하는 것으로서 탄성파 해석을 어렵게 한다. 본 논문에서는 개선된 다중펄스방법을 이용하여 음원 파형요소를 스파이크로 압축시키고 다중반사파를 제거하도록 하였으며, 지하 정보를 갖고 있는 반사계수 함수의 크기와 위치를 연속 계산방식에 의해 이끌어 냈었다. 개선된 다중펄스 방법의 탄성파 자료에의 적용은 좋은 결과를 보여주고 있다.

  • PDF

다중채널 탄성파 탐사자료의 전산처리(I) - 해양반사파 자료처리 - (Digital Processing for Multichannel Seismic Data(I) -Marine Reflection Data Processing-)

  • 김기영;홍종국;주형태
    • 지질공학
    • /
    • 제1권1호
    • /
    • pp.85-108
    • /
    • 1991
  • 해양 탄성파탐사 자료처리는 자료의 양이 많고, 처리과정이 여러 개의 전문적인 단계로 이루어져 있으며, 각 단계별로 많은 처리변수를 결정해야 하는 특성이 있다. 따라서 전체 자료를 대표할 만한 표본 자료를 대상으로 주요 처리변수를 결정하게 되고, 그 결과를 전체 자료에 적용시키는 것이 일반적이다. 본 연구에서는 국내 대륙붕 지역에 적합한 처리단계 및 단계별 최적 처리변수들을 결정하기 위하여 실제자료를 대상으로 시험처리를 실시하였다. 이 시험처리에서 구한 처리순서 및 처리변수들을 사용하여 양호한 탄성파 구조보정단면도를 작성하였다.

  • PDF

가스 하이드레이트 부존층의 구조 파악을 위한 탄성파 전산처리 및 AVO 분석 (Seismic Pre-processing and AVO analysis for understanding the gas-hydrate structure)

  • 정부흥
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2005년도 춘계학술대회
    • /
    • pp.634-637
    • /
    • 2005
  • Multichannel seismic data acquired in Ulleung Basin of East Sea for gas hydrate exploration. The seismic sections of this area show strong BSR(bottom simulating reflections) associated with methane hydrate occurrence in deep marine sediments. Very limited information is available from deep sea drilling as the risk of heating and destabilizing the initial hydrate conditions during the processing of drilling is considerably high. Not so many advanced status of gas hydrate exploration in Korea, the most of information of gas hydrate characteristics and properties are inferred from seismic reflection data. In this study, The AVO analysis using the long offset seismic data acquired in Ulleung Basin used to explain the characteristics and structure of gas hydrate. It is used primarily P-wave velocity accessible from seismic data. To make a good quality of AVO analysis input data, seismic preprocessing including 'true gain correction', 'source signature deconvolution', twice velocity analysis and some kinds of multiple rejection and enhancing the signal to noise ratio processes is carried out very carefully. The results of AVO analysis, the eight kinds of AVO attributes are estimated basically and some others of AVO attributes are evaluated for interpretation of AVO analysis additionally. The impedance variation at the boundary of gas hydrate and free gas is estimated for investing the BSR characteristics and properties. The complex analysis is performed also to verifying the amplitude variation and phase shift occurrence at BSR. Type III AVO anomaly appearance at saturated free gas area is detected on BSR. It can be an important evidence of gas hydrate deposition upper the BSR.

  • PDF

영동분지(백악기) 남동부의 전기비저항 및 탄성파탐사자료 해석 (Electrical resistivity and seismic reflection mapping for the southeastern part of the Yongdong basin (Cretaceous), Korea)

  • 김지수;한수형;이철우;김복철;양우헌;손호웅;손영관
    • 지구물리
    • /
    • 제3권2호
    • /
    • pp.77-90
    • /
    • 2000
  • 영동분지(백악기) 남동부 지역의 천부 구조를 파악하기 위하여 분지의 경계 부근에서 5 개 측선의 전기비저항 쌍극자탐사와 2 개 측선의 탄성파 반사법탐사를 수행하였다. 또한 분지 안에 존재하는 화산암체 부근에서 총 24 점의 전기비저항 수직탐사와 3 개의 쌍극자탐사를 실시하였다. 분지 경계에 대한 전기비저항값은 쌍극자단면도에서 예상 단층선을 기준으로 약 $1,500\;{\Omega}{\cdot}m$의 대비를 보이며 표준편차 또한 경계 부근에서 가장 크게 나타난다. 분지의 경계 단층은 탄성파 공통발파점자료에서 진폭 대비, 이벤트의 연속성 대비, 초동의 기울기 차이, 복소트레이스 단면도의 특성에 의해 효과적으로 확인되었다. 분지 안의 전기비저항 구조는 쌍극자탐사 및 전기비저항 수직탐사자료 해석 결과 북동방향의 고비저항대가 단속적으로 나타나고 있는데 이것은 남북방향으로 분포하는 북동방향의 경사를 가진 화산암체에 의한 반응으로 해석된다. 이에 대한 자세한 해석을 위해서는 앞으로 자력 및 자기지전류 탐사가 추가로 수행되어야할 것이다.

  • PDF

울릉분지 서부에서의 탄화수소 생성 및 지표 (Hydrocarbon generation and indicator in the western Ulleung Basin)

  • 류병재;김지훈;이영주;;;김일수
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2007년도 춘계학술대회
    • /
    • pp.507-510
    • /
    • 2007
  • Piston cores retrieved from the western Ulleung Basin, East Sea were analyzed to examine the potential for hydrocarbon generation and to determine the hydrocarbon indicators. 2D multi-channel reflection seismic and Chirp data were also investigated for mapping and characterizing the geophysical hydrocarbon indicators such as BSR (bottom simulating reflector), blank zone, pock-mark etc. High organic carbon contents and sedimentation rates that suggest good condition for hydrocarbon generation. High pressure and low temperature condition, and high residual hydrocarbon concentrations are favor the formation of natural gas hydrate. In the piston cores, cracks generally oriented to bedding may indicate the gas expansion. The seismic data show several BSRs that are associated with natural gas hydrates and underlying free gas. A number of vertical to sub-vertical blank zones were well identified in the seismic sections. They often show the seismic pull-up structures, probably indicating the presence of high velocity hydrates. Numerous pockmarks were also observed in the Chirp profiles. They may indicate the presence of free gas below the hydrate stability zone as well.

  • PDF

3차원 탄성파로부터 매질의 임피던스 산출에 관한 연구 (Impedance Estimation from 3-D Seismic Data)

  • 이두성
    • 지구물리와물리탐사
    • /
    • 제3권1호
    • /
    • pp.7-12
    • /
    • 2000
  • 본 논문은 3차원 탄성파자료로부터 저류층의 공극율 분포를 파악하기 위한 자료 전처리 및 역산법에 대한 연구이다. 전처리과정은 음파 및 밀도 검층기록에서 도출한 반사계수 시계열을 사용하여 탄성파기록의 진폭을 보정하는 공정이다. 연구지역에서 획득한 8개의 검층기록과 그 위치의 탄성파 기록으로부터 산출된 보정함수를 크리깅(kriging)하여 모든 탄성파기록의 보정함수를 산출하였다. 일정 대역폭을 보유한 탄성파기록으로부터 검층과 같은 광대역 임피던스 시계열을 도출하기 위해서는 한정된 대역폭의 탄성파 기록에서 손실된 저주파와 고주파 성분을 복구하여야 한다. 본 연구에서는 autoregressive(AR) 방법을 사용하였다.

  • PDF