• Korean Journal of Materials Research
• /
• v.26 no.10
• /
• pp.528-534
• /
• 2016

The aim of this paper is to consider the effect of the manufacturing processes on corrosion and centerline cracking of ancient bronze spoons. The ancient bronze spoons in question were made by several steps of forging, in reheated condition with cast ingots. The manufacturing method is similar to that of the modern spoons. The investigations include observations from light and scanning electron microscopes of the microstructure in terms of the crack propagation. Cracks in the centerline are caused by solute segregation in the center-line region; this solute is solidified in the final stage of bronze spoon manufacture. Centerline cracking is also caused by ${\alpha}$ phase segregation, accompanied by forged overlapping along the longitudinal direction of the spoons. A vertical stripe with cracks along the centerline of the spoon's width is formed by folding in the wrought process. The overlapping area causes crack propagation with severe corrosion on the spoon surfaces over a period of a thousand years. The failure mechanisms of ancient bronze spoons may be similar to that of modern spoons, and the estimation of the failure mechanisms of ancient spoons can be appropriate to determine failure causes for such modern spoons.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.1
• /
• pp.33-37
• /
• 2008

A noticeable amount of Kirkendall voids formed at the Sn-3.5Ag solder joint with electroplated Cu, and that became even more significant when an additive was added to Cu electroplating bath. With SPS, a large amount of voids formed at the $Cu/Cu_3Sn$ interface of the solder joint during thermal aging at $150^{\circ}C$. The in-situ AES analysis of fractured joints revealed S segregation on the void surface. Only Cu, Sn, and S peaks were detected at the fractured $Cu/Cu_3Sn$ interfaces, and the S peak decreased rapidly with AES depth profiling. The segregation of S at the $Cu/Cu_3Sn$ interface lowered interface energy and thereby reduced the free energy barrier for the Kirkendall void nucleation. The drop impact test revealed that the electrodeposited Cu film with SPS degraded drastically with aging time. Fracture occurred at the $Cu/Cu_3Sn$ interface where a lot of voids existed. Therefore, voids occupied at the $Cu/Cu_3Sn$ interface are shown to seriously degrade drop reliability of solder joints.

• Korean Journal of Cognitive Science
• /
• v.10 no.3
• /
• pp.39-49
• /
• 1999

The space of IID([ndependently, Identically Distributed) textures was built with axes of mean luminance and contrast, and studied on what kind of mechanisms were required to mediate texture segregation in this space. The conjecture was tested that one of these mechanisms is sensitive to the differences between the means of textures to be discriminated, whereas the other is sensitive to the differences between variances. The probability of discrimination was measured for various pairs of textures in the lID space The data were well fit by a model in which discrimination depends on two mechanisms whose responses are combined by probability summation. The conjecture was rejected that two mechanisms respectively tuned to mean and variance of texture function in segregation. Discrimination within space is mediated by 2 independent channels however: the 2 independent channels are not exactly tuned to texture mean and variance. One m mechanism was primarily sensitive to texture mean, whereas the other was sensitive to b both texture mean and variance.

• Transactions of Materials Processing
• /
• v.8 no.3
• /
• pp.247-247
• /
• 1999

The segregation (distribution) of nickel and the composition of its constituents influence the low thermal expansion characteristics (Invar effect) in Fe-30 wt.% Ni-12.5 wt.% Co-xC Invar alloy. The change of coefficient of the thermal expansion and magnetic properties were studied as an aspect of carbon addition causing the segregation of Ni in primary austenite of as-cast Fe-30 wt.% Ni-12.5 wt.% Co Invar alloy. The coefficient of thermal expansion of Fe-30 wt.% Ni-12.5 wt.% Co-xC Invar alloy showed its lowest value at 0.08 wt.% carbon, increased with increasing carbon content in the range of 0.08-1.0 wt.%C, kept constant at 1.0-2.0 wt.%C and decreased at carbon higher than 2.0 wt.%. The effective distribution of the coefficient of nickel in as-cast Fe-30 wt.% Ni-12.5 wt.% Co-xC Invar alloy increased with increasing carbon content. The volume fraction of they phase of Fe-30 wt.% Ni-12.5 wt.% Co-xC alloy increased with increasing carbon content. The microstructure of Fe-30 wt.% Ni-12.5 wt.% Co-xC alloy changed with the carbon content was independent of the coefficient of thermal expansion. The Curie temperature changed linearly with the carbon content and was similar to the change of the coefficient of thermal expansion. Moreover, the coefficient of thermal expansion decreased when the ratio of saturation magnetization to Curie temperature ($\sigma_s/T_c$) increased, decreasing the Curie temperature and showed a specific relationship with the magnetic properties of the Fe-30 wt.% Ni-12.5 wt.% Co-xCInvar alloy.

• Korean Journal of Materials Research
• /
• v.9 no.9
• /
• pp.883-889
• /
• 1999

The pure Al or-(1,2,3wt%)Cu alloy internal chill with 4,6,8,12 and 15mm ø, respectively, was inserted at the center of a graphite mold with the size of 95mm ø$\times$200mm H. The molten metal with the same composition as the internal chill was poured into the mold at the pouring temperature of $750^{\circ}C$ and the cooling rates, solidified structures and chemical segregation were analyzed. The results represented that there was remarkable increased in cooling rate as well as decrease in grain size, secondary dendrite arm spacing and chemical segregation as the ratio of ingot to internal chill diameter was increased to 8. However there was a considerable drop of the internal chill effect when this ratio exceeded 8, resulting from incomplete melting of internal chills. The optimum ratio for the maximum internal chill effect of pure Al and-(1,2,3wt%)Cu allolys was 8 at the given pouring temperature.

• Journal of Crop Science and Biotechnology
• /
• v.10 no.4
• /
• pp.249-256
• /
• 2007

A study was conducted to observe the variation and inheritance of agronomic traits and their interrelationship in mungbean. The objective of the study was to compare agronomic traits and hardseed percentage of 268 recombinant inbred lines(RILs) developed from the cross between wild Vigna subspecies sublobata "ACC 41" with the mungbean cultivar "Berken". The RIL population and their parents were evaluated under controlled conditions in a glass house at the University of Queensland, Brisbane, Australia. The results showed significant differences among the RILs and among the parents in all traits under study. Berken had a longer flowering date and a higher seed weight per plant, but less total leaf number and pod number per plant than ACC 41. A germination test between papers revealed that ACC 41 was 100% hard-seeded and did not germinate at all, while Berken germinated up to 100%. Their RILs distributed well between 0 to 100% hardseed. Upon scarification, all hardseed germinated within seven days. Narrowsense heritability estimates of total leave number, hardseedness, pod length, and pod width were highly heritable at 89.9, 98.9, 93.7, and 93.2%, respectively. The heritability of seed weight per plant and number of seeds per plant were lower at 63.1 and 58.4%, respectively. Seed weight per plant showed positive transgressive segregation when compared with ACC 41 and a positive correlation with 100 seed weight. While the number of seeds per pod showed a negative transgressive segregation when compared with Berken and a negative correlation with pod length and pod width. The RILs gave a 1:1 segregation ratio in leaflet shape, growth habit, and growth pattern, indicating that these traits were controlled by a single dominant gene.

• Korean Journal of Plant Resources
• /
• v.15 no.3
• /
• pp.298-304
• /
• 2002

The inheritance of resistance to gall mite(Eriophys macrodonis) in boxthorn cultivars was studied with plants infected in open field. Segregation of the F$_1$ generation from crosses between resistant cultivars(Japan 1 and China 1) and susceptible line(CL42-56) hits a 3 resistant : 1 susceptible ratio, and the segregation ratio was 15 : 1 in cross between Japan 1 and China 1. It is concluded that gall mite resistance seemed to be controlled by two duplicate genes(El and E2), such that E1e1E2e2 symbolize the genotypes of China 1 and Japan 1. However, F, generation from Chungyanggugiza and CL42-56 cross did not showed clear segregation pattern but continuous variation was observed against gall mite resistance when resistance was determined on the basis of the percentage of galled leaves. Results indicated that the inheritance of resistance in Chungyanggugiza may be polygenic and complex. Also, Japan 1 and China 1 has a strong potential as a source of gall mite resistance, and Chungyanggugiza showing less resistance still has a valuable source.

• Animal Systematics, Evolution and Diversity
• /
• v.12 no.4
• /
• pp.331-347
• /
• 1996

The geographic distribution and variation for Rhinogobius brunneus were surveyed by means of allozymic and morphological analyses and it was revealed that the Korean populations of R. brunneus comprise three distinct types, Type-A, Type-B, and Type-C, which show considerable differentiation to a degree of interspecific level(Rogers' S(1972): $S_{A-B}$=0.631, $S_{A-C}$=0.628, $S_{B-C}$=0.661). In addition, no evidence of gene flow among the types was found at sympatric area and it is assumed that reproductive isolation is completed. Moreover there is microhabitat segregation according to the distance from river mouth among each types and which segregation was regarded as a factor to facilitate reproductive isolating mechanism. Therefore, based on the evidence presented above, these three types of R. brunneus are considered as typical discrete species.

• Korean Journal of Breeding Science
• /
• v.42 no.1
• /
• pp.35-39
• /
• 2010

Soybean proteins are widely used for human and animal feed in the world. ${\beta}$-conglycinin protein exhibits poor nutritional and food processing properties and Kunitz trypsin inhibitor (KTI) protein is a main anti-nutritional factor in soybean seed. The objective of this research was to identify the inheritance of $cgy_1$ gene and ti gene for the improvement of soybean cultivar with no KTI proteins and low amount of ${\beta}$-conglycinin. $F_2$ population was made by crossing between "Gaechuck2ho" (${\alpha}^{\prime}$-subunit present $Cgy_1Cgy_1$, KTI protein absent titi) and PI506876 (${\alpha}^{\prime}$-subunit absent $cgy_1cgy_1$, KTI protein present TiTi) parent. A total of 434 $F_2$ seeds were obtained and analyzed for the segregation of ${\alpha}^{\prime}$-subunit protein and KTI protein using SDS-PAGE. The segregation ratio of 3 : 1 for $Cgy_1$ locus (310 $Cgy_1$_ : 124 $cgy_1cgy_1$) and Ti locus (339 Ti_ : 95 titi) were observed. Segregation ratios of 9 : 3 : 3 : 1 (241 $Cgy_1$_Ti_: 69 $Cgy_1$_titi: 98 $cgy_1cgy_1$Ti_: 26 $cgy_1cgy_1titi$) between $Cgy_1$ gene and Ti gene in $F_2$ seeds were also observed (${\chi}^2= 5.367$, P = 0.10 - 0.20). This data showed that $Cgy_1$ gene was inherited independently with the Ti gene in soybean. These results will be useful in breeding program for selecting the line that does not exhibit or lacks both ${\alpha}^{\prime}$-subunit protein and KTI protein in soybean.

• Advances in concrete construction
• /
• v.7 no.2
• /
• pp.87-96
• /
• 2019

Self-compacting concretes (SCC) are highly fluid concrete which can flow without any vibration. Their composition requires a large quantity of fines to limit the risk of bleeding and segregation. The use of crushed sand rich in limestone fines could be an adequate solution for both economic and environmental reasons. This paper investigates the influence of quarry limestone fines from manufactured crushed sand on rheological, mechanical and durability properties of SCC. For this purpose, five mixtures of SCC with different limestone fines content as substitution of crushed sand (0, 5, 10, 15 and 20%) were prepared at constant water-to-cement ratio of 0.40 and $490kg/m^3$ of cement content. Fresh SCC mixtures were tested by slump flow test, V-funnel flow time test, L-box height ratio, segregation resistance and rheological test using a rheometer. Compressive and flexural strengths of SCC mixtures were evaluated at 28 days. Regarding durability properties, total porosity, capillary water absorption and chloride-ion migration were studied at 180 days. For the two test modes in fresh state, the results indicated compatibility between slump flow/yield stress (${\tau}_0$) and V-funnel flow time/plastic viscosity (${\mu}$). Increasing the substitution level of limestone fines in SCC mixtures, contributes to the decrease of the slump flow and the yield stress. All SCC mixtures investigated achieved adequate filling, adequate passing ability and exhibit no segregation. Moreover, the inclusion of limestone fines as crushed sand substitution reduces the capillary water absorption, chloride-ion migration and consequently enhances the durability performance.