• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.718-725
• /
• 2017

The method of stator segmentation is generally taken to enhance the electromagnetic performance of surface-mounted permanent magnet (SPM) machine and reduce its production cost. Based on the model with single slot, the expressions of cogging torque in machine with uniform or non-uniform segmentations are deduced and the optimal combination is given. Moreover, this paper discusses a structured skewing method and put forward a novel stator structure model to reduce the cogging torque in segmented permanent magnet machine. The model can reduce the cogging torque amplitude by shifting a proper angle of slot-opening. The shifting angle formula for analysis can also be suitable for other permanent machine with segmented stator. Finally the results of finite element simulation are given to prove that the method is effective and feasible.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.2013-2018
• /
• 2014

According to the manufacturing process of the laminated stator core for an inserted permanent magnet synchronous motor (IPMSM), the iron loss may be different. It is because the mechanical stress imposed to electrical steel sheet is strongly dependent on the manufacturing process. This paper proposes a new iron loss measurement algorithm which utilizes the induced voltage of a search coil and exciting current. The method is effective even when the distribution of magnetic flux density is not uniform along the magnetic flux path as well as uniform. The developed iron loss measurement system is applied to bonded- and embossed-type segmented stator cores of an IPMSM, and the iron losses are quantitatively compared.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.126-133
• /
• 2017

This paper deals with the effects of welding, which is done to fix the stator stack, on a motor in case of fabricating a prototype motor that is manufactured in a small quantity. In the case of a small motor, the stator is designed and fabricated with the segmented core as a way to raise the fill factor of winding wire to the utmost within a limited size. In case of fabrication by welding both inside and outside of the stator in order to fix the segmented-core stator, the effects of stack are ignored, and the eddy current loss occurs. This paper performed the no-load test on an IPM-type BLDC motor for driving the suction fan of a vacuum cleaner, which was manufactured by using a segmented-core stator. As a result of the test, it was found that input power more than expected was supplied. To analyze the effects of welding by using the finite element analysis method and verify them experimentally, a stator was re-manufactured by bonding, and input power supplied during the no-load test was compared.

• 전기학회논문지
• /
• 제64권12호
• /
• pp.1686-1694
• /
• 2015

Stator tooth segmentation and back-iron segmentation is key solution to easing the burden of manufacturing process of permanent magnet synchronous motor. The purpose of this paper is the design and characteristic analysis of permanent magnet synchronous motor having the segmented phase modular stators. Using by two-dimensional finite element method, the static/no-load characteristic analysis of the permanent magnet synchronous motor is performed. The analysis has been performed considering the additional air gaps between stator modules. The analysis results were experimentally verified, and the validity of the proposed analysis method and feasibility of the machine was confirmed.

• 한국정보통신학회논문지
• /
• 제20권1호
• /
• pp.131-141
• /
• 2016

SRM은 저비용, 간단한 자기구조, 넓은 운전속도, 높은 효율, 직류전원과의 우수한 결합성 등의 장점을 가진 전동기구이다. SRM의 토오크는 자속의 방향과는 무관하여 자기구조의 배치가 유연한 특성을 가지고 있어 다양한 자기구조를 가지고 있다. 본 논문에서는 자속방향에 따라 Radial-Flux SRM와 Axial-Flux SRM로 크게 나누었고 기계적인 구조의 차이에 따라 Radial-Flux SRM에는 Conventional, Segmented stator and rotor, Double stator SRM 로, 그리고 Axial-Flux SRM에는 C-core stator와 Axial-airgap SRM로 분류하였고 각각에 대해 비교 해석하여 적절한 용도에 최적의 자기구조를 선택할 수 있도록 각각의 기본적인 특성을 제시하였다.

• Journal of Magnetics
• /
• 제21권3호
• /
• pp.393-398
• /
• 2016

This paper proposes a novel 16/10 segmented rotor switched reluctance motor (SSRM) for belt-driven starter generators (BSGs). Different from conventional SRMs, the stator of the proposed SSRM consists of two types of stator poles, i.e., exciting and auxiliary poles, and the rotor is constructed from a series of discrete segments. The topology and operation principle of this proposed SSRM are illustrated firstly, and then the design rules are listed. In addition, the finite element method (FEM) is employed to get the static and dynamic characteristics of the proposed SSRM. Finally, the simulation results are presented to show the validity of the proposed SSRM for BSGs.

• Journal of Magnetics
• /
• 제17권2호
• /
• pp.100-108
• /
• 2012

Flux concentrated permanent magnet transverse flux machines, FCPM-TFMs, with segmented stators require multi-turn concentric saddle coils to replace the ring coils, which are normally utilized in conventional layeredphase TFM constructions. In this paper, we investigate the influence of the shape of saddle phase windings and their parameter variations on the output torque productivity. Non-meshed coils evaluated via a finite element method (FEM) to examine the effect of the coil's location within one phase on machine performance. By using meshed coils, the analysis can be extended to inspect the distributions of magnetic field strength as well as current density in the coils. Throughout the study, the influence of design parameters on the output torque for two stator structures, i.e., a laminated and soft magnetic composite (SMC), are evaluated.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.1986-1989
• /
• 2010

The modification of magnetic structures for an E-core switched reluctance machine (SRM) comprising two segmented stator cores or a monolithic stator core is presented for ease of assembly, good manufacturability, mechanical robustness, and electromagnetic performance improvement. The E-core stator has four small poles with phase windings and two or four large poles (hereafter referred to as common poles), in between. The common poles are shared by both phases for positive torque generation during the entire operation. The E-core SRMs are compared to a conventional two-phase SRM. The comparison includes cost savings, torque, copper and core losses, and efficiency in order to validate the distinct features of the E-core SRMs. Magnetic equivalent circuit (MEC) technique is employed for proving the benefits of the E-core common-pole structure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.80-82
• /
• 2007

This paper presents the overhang effects of a novel axial flux permanent magnet (AFPM) machine, which consist of the segmented stator and fractioned slot windings, with one rotor and double stator. In addition, the overhang effect of permanent magnet of the motor has been analyzed quantitatively. The overhang is used to enhance the force density in permanent magnet machine. According to the variation of overhang length, the flux density distribution and torque are quantitatively compared. For these analysis, three dimensional finite element method (3D FEM) has been used in this paper. From the results, the proper overhang length of PM is selected to improve the performance of the AFPM machine.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.243-246
• /
• 2003

This paper presents a new motor design well suited for an advanced exercise bike. The advanced exercise bike setup high demands for performance and physical dimensions, which is high torque, wide speed range and a diameter/length ratio around 5. These requirements makes the new motor design called an E-core Transverse Flu Machine (ETFM) vev interesting because the segmented design of the stator and rotor poles enables high diameter without increasing the flux-path and since the ETFM is similar to the switched reluctance motor, high torque and wide speed range is possible. The design of the ETFM can be peformed using a developed design program, which is also introduced in the paper. A prototype of the exercise bike with the ETFM and a classical H-bridge converter with analog current control is constructed for verification of the concept.