• Korean journal of applied entomology
• /
• v.36 no.2
• /
• pp.141-144
• /
• 1997

Studies were conducted to investigate the incidense of insect pests in transplanted and direct seeded paddy fields in southern region of Korea. Population dencities of the rice green leafhopper (RGLH: Nephotettix cincticeps Uhler) and rice leaffolder (RLF: Cnaphalocroch medinalh Guenee) were higher in machine transplanted than in direct seeded, but the brown planthopper (BPH: Nilaparvata lugens Stal) and smaller brown planthopper (SBPH: Laodelphax striatellus Fallen) were abundant in direct seeded. However, no significant difference was found between machine transplanted and direct seeded fields in the incidense of rice stem borer (RSB: Chilo suppressalis Walker), whiteback planthopper (WBPH: Sogatella furcifera Horvath), and rice stem magot (RSM: C'hlorops oryzae Matsumura). Occurrence of rice key pests were affected more by transplanting time than other cultural practices. Later transplanting induced higher populations of BPH, WBPH, SBPH, RGLH. However, RSB and RLF caused higher damage in earlier transplanted paddy field.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.589-596
• /
• 2008

Performance of a pulsed heat source high temperature inert gas plasma MHD electrical power generator, which can be one of the candidates of space-based laser-to-electrical power converter, is examined by a time dependent two dimensional numerical simulation. In the present MHD generator, the inert gas is assumed to be ideally heated to about $10^4K$ pulsed-likely within short time(${\sim}1{\mu}s$) in a stagnant energy input volume, and the energy of high temperature inert gas is converted to the electricity with the medium of pure inert gas plasma without seeding. The numerical simulation results show that an enthalpy extraction ratio(=electrical output energy/pulsed heat energy) of several tens of % can be achieved, which is the same level as the conventional seeded non-equilibrium plasma MHD generator. Although there still exist many phenomena to be clarified and many problems to be overcome in order to realize the system, the pulsed heat source high temperature inert gas MHD generator is surely worth examining in more detail.

• Korean Journal of Weed Science
• /
• v.11 no.3
• /
• pp.178-186
• /
• 1991

This study was conducted to evaluate the major weeds occurred in direct seeded rice and their compition with rice, and to establish the effective weed control method. The important weeds occurring in dry direct seeded rice were Echinochloa crusgalli, Cyperus amuricus, Rorippa islandica, etc. Among them, Echinochloa crusgalli was the most dominant weed species. In view of the Simpson's dominance index, the maximum number of the weeds was observed at 30 days after seeding, showing 0.26, but decreased as the time passed. In other hand, Simpson's dominance index of weed dry weight increased from 0.09 at 15DAS(days after seeding) to 0.28 at 60DAS indicating that particular weed such as barnyardgrass was dominating the fields. The plant height and the tiller number of rice in the dry direct seeded rice were not greatly affected by the time and duration of competition with weeds, but rice yield was greatly influenced by them. The yield reduction was observed when compition between rice and weeds were initiated at 20 to 40 DAS till the harvesting time. The highest weed control efficacy was observed at the treatment of systematic herbicide application such as soil applied Butachlor followed by Mefenacet/Bensulfuron-methyl/Dymron at 30 DAS after seeding, and soil applied Dimepiperate/Bensulfuron-methyl mixture as a preemergence type gave also an excellent control.

• Journal of Biosystems Engineering
• /
• v.3 no.2
• /
• pp.22-33
• /
• 1978

To maintain the self-sufficiency of food production , it is required to improved the productivity and increase the effective utilization of land in the double cropping areas using improved cultivation technology. The following reasons encourage this cours of action because the overlapping rice harvest and barely seeding seasons complete for labour, the lower price of barley makes it financially less attractive to grow and these two facts together are responsible for a decrease in barley being planted in certain more seasonably marginal double cropping areas. Fro these reasons, it is desirable to carry out tests to improve the current cultivation techniques . In this interest , the following studies were carried out in the experimental field located at Banweol-myeon, Whasung-jkun, Gyeonggi-do from October 1977 to July 1978 in order to establish the mechanical method of barley cultivation using the power tiller. The summarized results are as follows. 1. The work performance in the seeding operation using the rotary barley seeder was 68 minutes per 10 ares which compares favourably with 408 min/10a using the conventional method. This is only one sixth of the time required by th conventional method. The operating costs using the rotary barley seeder was 1, 463 won per 10 areas as against 3, 486 Won per 10 ares for the conventional method, showing a saving of about 50% in comparison with the conventional method. 2. In the manure spreading operation, the work performance was 25 min/10a for the manure spreading machine , compared to 1089 min/10a for the manual operations. This is about one fourth of the time required by the conventional method, The operating costs were 810 Won/10a for the machine and 857 Won/10a for the manual labour. This cost shows little advantage by the machine over the manual labor costs. The conventional method of manure spreading will continue pending decision which will develope and improve the machine.3. Work performance in the rolling operation using the barley rolIer was 30 min/lOa which compares favourably with 135 min/10a using conventional method. This was one fourth of the time required by the conventional method. The operating costs were 514 Won/103. for the machine and 1, 003 Won/lOa for manual labour. In the weed control operation, the work performance and operating costs were 45min/lOa, 1, 399won/10a for the herbcide application using the power sprayer, 1, 149min/10a 8, 541won/lOa for the conventional method respectively. This is 26 times higher efficiency in comparison to the conventional method. 4. In the harvesting operation using the reaper binder and tiller attachment, the work performance was 60min/lOa and represents a cost of 2, 039won/10a. The con\ulcornerventional method took 640min/10a at a cost of 4, 757won/lOa. The reaper binder showns a saving of one tenth over the conventional method. The automatic thresher is already recommended for the current situations, and is now being used. 5. From a comparison of the results of the above trials, the serial cultivation system using the attachment for the power tiller such as the rotary barley seeder is now to be recommended for the current barley cultivation system. It is also recommend from these results that the mechanized technology now available must be used to improve and maintain the increase in barley production. It is seen th1t this is the only course now avaihble to solve the peak seasonal requirements of labour needed for l11rvesting and seeding between rice and barley cultivation.

• Korean Journal of Plant Resources
• /
• v.31 no.1
• /
• pp.24-31
• /
• 2018

Amaranth (Amaranth caudatus) is attracting attention as a preference crop in Gyeongsangbuk-do province. To determine its growth potential and cultivation requirements, we investigated its growth characteristics, dry matter productivity, and grain yield according to the growing period. Growth and dry matter productivity were significantly higher for plants that were sown on May $10^{th}$ when the temperature was the highest, whereas the yield was significantly higher for plants that were sown on April $10^{th}$. Amaranth grain yield ranged from 96 to 243 kg according to the sowing date and cultivation year. The optimum harvest time for plants that were sown on April $10^{th}$, May $10^{th}$, and June $10^{th}$ were 120, 110, and 110 days after seeding, respectively. The mean temperature and growing period had a significant quadratic function with yield. Based on these equations, the optimum growing temperature was estimated as $20.6^{\circ}C$ and the optimum growing period as 104-119 days after seeding.

• Korean Journal of Agricultural Science
• /
• v.9 no.1
• /
• pp.223-230
• /
• 1982

To obtain the information on the germination and initial growth of the sesame, the seed of 6 sesame cultivars obtained from upper and lower position of plants were seeded and the results on the germination and initial growth were summarized as follows; 1. When the seeding time was delayed, the days to flower of all sesame cultivars were significantly decreased. And the shortening rate of days to flower by delaying seeding time showed significant differences among the sesame cultivars. 2. At all cultivars excluding IS 103, the germination percentage of the seeds obtained from lower position of sesame plant was significantly higher than those from upper position. 3. Germination percentage of IS 103 seeds from lower position of sesame plant was 20.0% at petri dish experiment and 75.0% at pot experiment and those from upper position of the stem was 17.0% at petri dish experiment and 72.5% at pot experiment, respectively. 4. The germination speed of all cultivars showed a same tendency as germination percentage, but the germination speed of cultivars at pot experiment was higher than those at petri dish experiment. 5. The sesame seedlings from lower position seed were increased in stem length, root length, leaf length and fresh weight than those from upper position seed. The germination percentage and the initial growth showed significant differences by the seed weight in same cultivar, however did not show any varietal differences.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.3
• /
• pp.280-285
• /
• 1991

The rice culture techniques of the ancient China which have played a key role directly and indirectly, in development of ancient farming and its techniques of Korea, were established before Christ in terms of dry-farming and the spirit of the farming-first principle. Especially techniques of rice culture were developed by cultivation methods for deep plowing, storage of water and preservation use of soil fertility. Therefore, the techniques of transplanting methods, seeding in rows, use of iron-made farming tools and dam construction for irrigation were advanced. And rice varieties were differentiated to avoid disasters or to supply of rice for various uses in many areas. Also, because north China was the origin of Chinese agriculture in which population density was low and flat land was wide that were the cradle of Chinese agriculture, ‘Hwayungsunubeob’(firing and drawning weed control method) and fallowing were quickened as intensive techniques of rice culture. In connection with the view of agricuture with 'the theory of the cosmic dual forces and the five primary substances' of Han Mooje and Chamwye scholars, the techniques of seeding and selection of crops were gradually developed. From ‘Jeminyosul’ of the 6th century to ‘Wangjongnongseo’ of the 14th century, the techniques of rice culture have been developed continuously and additively, but were not improved thereafter Won dynasty. From this point of time, the time of agriculture in the end of Koryo age and by ‘Nongsajiksul’ were initiated.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.2
• /
• pp.192-197
• /
• 2012

The competition between green manure and forage crops frequently occurred at agricultural field because of soil fertility and livestock feeding selection. These experiments were carried out to evaluate the effects shoot and residue for green manure and forage production by leguminous crops and barley mixtures at paddy. Field experiments were conducted at paddy soil from 2008 to 2009. Treatments consisted of mixture and inter-seeding of barley and leguminous crops (hairy vetch and crimson clover). These treatments were divided into cutting height of 8 and 25 cm for using of green manure and forage at once. The residue biomass of 25 cm cutting height was higher than 8 cm and were no significantly between mixture and inter-seeding. However, residues of legume crop were significantly higher at inter-seeding than mixture. The shoot biomass of 8 cm cutting height was higher than 25 cm for forage using. The production of legume crop was high at the barley and hairy vetch seeding plot. The mixture of hairy vetch and barley showed the best biomass of shoot and residue for green manure and forage using at 25 cm of cutting height. Also this treatment could be possible to rice cultivation by no fertilization. Therefore, we suggested that 25 cm cutting of hairy vetch and barley mixture could be used for green manure and forage at the same time under rice-based cropping system.

• Korean journal of applied entomology
• /
• v.46 no.1 s.145
• /
• pp.109-115
• /
• 2007

This study was carried out to determine occurrence and damage of golden apple snail, Pomacea canaliculata on water seeding area in Jeonnam province. The density of golden apple snail maintained hlgh until October 2003, but quickly decreased from November. They overwintered only in a portion of the water canals but could not find in dried paddy field. They reproduced from May and June in the canal water and paddy field, respectively. Feeding time of golden apple snail on rice seedlings was 235.2 seconds, feeding length of that was 8.4cm. When golden apple snail fed rice seedlings, the stem remain only 2.5cm from areal part which could not recover. The more density of golden apple snail, the fester feeding rate. Density and number of eggs laid of golden apple snail after overwintering was higher on bank around of paddy field than on middle of that. The percent of shell size after over wintering was higher in small (below 25mm) than big (over 36mm). But in case of Boseong area, the slze was reverse because the soil has soft mud. The survival rate of overwintering golden apple snail was lower than that of breeding. They did not move when the temperature changed rapidly, but the temperature increased they start to move. They dead almost below $-3^{\circ}C$. The damage of rice by golden apple snail in the direct water seeding was 20%. In machine transplanting, rice damaged only fore-end of leaf and recovered subsequently. When golden apple snail release in direct water seeding field, the percent of damage was 5.6% in immediately release plot. The later release, the lower damage.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.4
• /
• pp.331-336
• /
• 2012

This study was carried out to evaluate the wheat cultivation system to reduce costs and mechanize wheat production. A field study was conducted for 2 years (2009 to 2010) at the National institute of crop science, Iksan, Korea. We used working system I and working system II for the experiment. Working system I is used a multiple machine attached with a spreader tractor (seeding, fertilization, seed coverage, and weed control functionality) and working system II is used a multiple machine with a tractor which works for simultaneous job when seeding step (seeding, fertilization, and seed coverage). Sowing to harvesting operation time is 118 hours/ha for mechanize with conventional planting. Working system I is a multiple machine and a combine machine with a tractor, which worked 26 hours/ha lower than conventional planting. Working system II is 18 hours/ha lower than conventional planting. The reduced work efforts of working system I and II were 78% and 85% respectively. The growth and yield of wheat according to working system I and II is lower than conventional planting. Therefore, a multiple machine needs to study for appropriate seeding rate. Mechanization cost in consideration of the mechanical break-even point when the working system I is 3.7 ha and working system II is 4.2 ha. The farm income is enhanced by working system I (778,110 won/ha) and working system II (849,930 won/ha). The results showed that application of a multiple machine lowered costs of wheat production.