• 제목/요약/키워드: seeding density

검색결과 146건 처리시간 0.04초

벼 무논골뿌림 재배시 입모수별 질소시비방법이 생육 및 수량에 미치는 영향 (Effect of Nitrogen Management on Rice Growth and Yield under Different Seedling Density in Puddled -soil Drill Seeding)

  • 김상수;백남현;이선용;조동삼
    • 한국작물학회지
    • /
    • 제40권5호
    • /
    • pp.629-636
    • /
    • 1995
  • 벼 무논골뿌림 재배시 입모수별 적정 질소 시비방법을 구명하고자 입모수 및 질소시비방법을 달리하여 생육 및 수량을 검토한 결과를 요약하면 다음과 같다. 1. 최고분얼수는 입모수 30개/$m^2$ 에서 파종후 60일경, 60개/$m^2$ 는 파종후 55일경, 90~150개/$m^2$ 에서는 파종후 50일경이었으며, 유효경 비율은 입모수가 많을수록 적었다. 2. 수수는 입모수 30개/$m^2$ 에서만 300개/$m^2$ 내외로 다소 적었으나 60개/m 이상에서는 입모수간에 별 차이가 없었고 입모수가 적었을 때는 실행 시비방법보다 조기분얼비 시용(T2)에서 많았다. 3. 도복은 입모수 120개/$m^2$ 이상에서 다소 발생하였고 시비방법간에는 수비를 시용한 실행 분시방법에서 다른 시비방법보다 다소 심하게 발생하는 경향이었다. 4. 수량은 입모수 60개/$m^2$ 이상에서는 입모수간에 유의차가 없었고 입모수가 적었을 때는 실행 시비방법보다 3엽기에 분얼비를 시용하는 것이 증수되었으며 입모수 90개 이상에서는 시비방법간에 별 차이가 없었다. 5. 재파시 경영비 증가를 감안한 소득으로 본 재파한계 입모수는 55개/$m^2$ 이었다.

  • PDF

수도기계이앙육묘에 파종량이 배유물질의 소모 및 묘소질에 미치는 영향 (Effects of Seeding Rates on the Endosperm Depletion and Seedling Growth of Rice for Mechine Transplanting)

  • 김용재;신해룡;송동석;장강운
    • 한국작물학회지
    • /
    • 제33권2호
    • /
    • pp.146-156
    • /
    • 1988
  • 기계이앙용 상자육묘에 파종량 차이에 따른 배유양분의 소모와 묘소질의 변화를 알아보고자 다수계품종인 삼강벼와 일반계품종인 동진벼를 공시하였던 결과는 다음과 같다. 1. 초장은 파종후 급속히 신장하여 10일 경에는 삼강벼, 동진벼가 각각 묘의 60, 50%에 달하였으며, 밀파할수록 점차 작아졌는데, 그 정도는 삼강벼에서 뚜렷하였다. 2. 건물중은 묘대일수가 경과할수록 완만히 증가 하였는데, 밀파할수록 그 증가 속도가 느렸다. 삼강벼, 동진벼 공히 밀파할수록 건물중의 감소가 뚜렷하였는데, 가장 박파인 75g구가 다른구보다도 건물중이 현저히 무거웠다. 3. 배유양분은 삼강벼, 동진벼가 파종후 5일 이내에 각각 68, 65%가 15일에는 각각 85, 90% 정도가 소모되었는데 완전소진시기는 삼강벼가 3.1엽기인 파종후 25∼30일, 동진벼는 3.3엽기인 파종후 25일 정도였다. 4. 묘의 부위별 당함량은 배유가 엽보다 높았으며, 묘대일수 10일에서 엽과 배유의 당함량이 최대치를 나타냈고, 파종양별 당함량 식물체부위, 묘령 및 품종에 따라 달랐다. 5. 묘의 단백질함량은 엽에서 묘대기가 진행될수록 점차 감소하여 15일에 최소치를 보였고, 배유는 파종직후 감소하여 4일에 최소치를, 5일에는 다시 증가하였다가 그 이후 감소하였고, 파종양별 차는 묘령에 따라 각각 달랐다. 6. 묘의 발근력은 30일 묘 가장 좋았으며, 묘령이 높을수록 점차 나빳으며 밀파할수록 발근력이 떨어지는 경향이었다. 7. 엽록소함량은 삼강벼가 동진벼보다 컸으며, 파종량별로는 두 품종 공히 뚜렷한 경향을 보이지 않았다.

  • PDF

Sol-Gel법에 의한 $ZrO_2/Al_2O_3$ 복합체의 제조에 미치느 Seeding 효과 (The Effect of Seeding on Preparation of $ZrO_2/Al_2O_3$ Composite by Sol-Gel Method)

  • 김선욱;주치홍;장윤식;손영국;박홍채
    • 한국세라믹학회지
    • /
    • 제30권7호
    • /
    • pp.571-577
    • /
    • 1993
  • The effect of $\alpha$-Al2O3 seeding on preparation of zirconia/alumina gel fragment prepared by sol-gel processing was characterized through XRD, SEM, TG/DTA and IR analysis. Aluminum isopropoxide and zirconium butoxide were used as starting materials. $\alpha$-Al2O3 seeding restrained grain growth of alumina and zirconia, and decreased tetragonal to monoclinic phase transformation of zirconia on cooling. Therefore, fine zirconia-toughened alumina composite having the relative sintered density of about 98% of theoretical at 140$0^{\circ}C$ for 2h could be obtained.

  • PDF

Changes of Hairy vetch Biomass by Different Seeding Methods and Rice Growth and Soil Physicochemical Properties by Its Incorporation in Paddy

  • Jeon, Weon-Tai;Ryu, Jin-Hee;Seong, Ki-Yeong;Kim, Min-Tae;Kang, Hang-Won;Lee, Jae-Eun;Jung, Chan-Sik;Kim, Wook-Han
    • 한국토양비료학회지
    • /
    • 제46권4호
    • /
    • pp.270-275
    • /
    • 2013
  • Hairy vetch can fix nitrogen from the atmosphere as a leguminous cover crop. This research was carried out to determine optimum seeding method of hairy vetch and application effect in paddy. Field experiment was conducted at Sinheung series (fine loamy, mixed, nonacid, mesic family of Fluvaquentic Endoaquepts) from Sep. 2011 to Oct. 2012 at the National Institute of Crop Science (NICS), RDA, Suwon, Gyeonggi province, Korea. Hairy vetch used in the study was 'Cheongpyungbora', developed by National Institute of Crop Science. Seeding methods of hairy vetch consisted of Broadcasting Before Rice Harvesting (BBRH), Partial Tillage Seeding (PTS), Minimum Tillage Seeding (MTS), No Tillage Seeding (NTS), and Drill Seeding (DS). Both MTS and NTS showed the highest biomass among the seeding methods. The rice yield of MTS and NTS significantly increased compared to conventional fertilization (CF). Also soil properties including organic matter and bulk density were improved by incorporation of hairy vetch. Therefore, we suggested that MTS and NTS could be used to produce hairy vetch and rice in paddy.

벼 기계이앙시 상토종류와 파종량이 묘생육에 미치는 영향 (Effect of Different Nursery Soils and Seeding Amounts on Seedling Growth of Rice)

  • 김왕경;손재근
    • Current Research on Agriculture and Life Sciences
    • /
    • 제19권
    • /
    • pp.1-8
    • /
    • 2001
  • 벼 자동화 육묘시설에서 상토의 종류와 파종량이 묘생육에 미치는 영향을 조사분석한 결과를 요약하면 다음과 같다. 상토의 성분분석 결과 산도(pH)는 '삼경상토'가 8.6으로 가장 높았고 '부농 2호'는 5.1로 가장 낮았다. 유효인산 함량은 '부농 1호'가 843 ppm으로 가장 높았고 '자가상토'에서 74 ppm으로 가장 낮았다. 전질소함량은 '원조상토' 및 '부농 1호', '부농 2호', '부농 3호'에서 다른 상토에 비해 높은 경향을 나타내었다. 상자당 파종량이 250 g 일때 상토의 종류에 따른 15일묘의 초장은 '부농 1호', '부농 2호', '부농 3호'에서 14.2~14.9 cm로 나타난 반면, '자가상토'에서의 초장은 13.1 cm로 짧았다. 상자당 파종량이 300 g으로 증가하면 상토 종류에 관계없이 묘초장은 길어졌고 그 차는 10일묘에서 보다 15일묘에서 크게 나타났다. 상토의 종류에 따른 15일묘의 건물중은 '부농 2호'가 13.3 mg으로 가장 무거웠고, 묘충실도도 '부농 2호'에서 0.96으로 가장 높았으며 '자가상토'와 '자가상토'에 시판상토(부농 2호)를 혼용한 처리구에서의 묘생육은 본 시험에 공시된 6종류의 시판 상토에 비해 저조하였고,매트형성도 불량하였다.

  • PDF

질소시비량, 재식밀도 및 파종기가 오크라의 수량에 미치는 영향 (Effect of Nitrogen Fertilizer, Planting Density and Seeding Date on the Yield of OKra(Abelmoschus esculentus (L) MOENCH))

  • 이경희;조재연;윤성탁;박석근
    • 한국작물학회지
    • /
    • 제35권3호
    • /
    • pp.179-183
    • /
    • 1990
  • 질소시비량, 재식밀도 그리고 파종기가 오크라 생협수량에 미치는 영향을 살펴보고자 시험하였다. 그 결과를 요약하면 다음과 같다. 1. 주당착과수는 질소시비량 8kg/10a, 재식밀도는 90$\times$30cm 처리에서 가장 많았다. 2. 질소비료수준 및 재식밀도간 생협수량은 각각 8kg/10a, 45$\times$30cm 처리에서 가장 많은 경향을 보였다. 가장 수량이 많은 구는 8kg/10a의 45$\times$30cm로서 1,348.7kg/10a이었다. 3. 파종기에 있어서 생협수량은 5월 1일 파종이 1,270.8kg/10a로 가장 수량이 많았다.

  • PDF

직립형 팥의 넓은이랑 줄뿌림 재배시 재식밀도에 따른 생육 및 수량특성 (Effects of Planting Density on Growth and Yield in Wide-Row Drill Seeding of Upright Type Adzuki Beans (Vigna angularis (Willd.) Ohwi Ohashi))

  • 정기열;최영대;전현정;이상훈;전승호
    • 한국작물학회지
    • /
    • 제63권4호
    • /
    • pp.378-383
    • /
    • 2018
  • 본 연구는 건강 기능성 팥에 대한 소비자의 선호도가 높아지면서 수요와 재배면적이 점차 확대되고 있는 팥의 생산량 증대와 자급률 향상을 위한 체계적인 재배기술을 확립하기 위한 기초자료를 얻고자 기계화 수확에 적합한 넓은이랑 줄뿌림 재배시 재식밀도에 따른 생육 및 수량에 관한 연구를 수행하였다. 1. 경장은 주간거리가 짧아질수록 '아라리' 품종은 길어지는 경향을 보였으나, '홍언' 품종에서는 대체적으로 짧아지는 경향으로 나타났으며, 경태와 분지수에서는 두 품종 모두 주간거리가 짧아질수록 가늘어지거나 적어지는 경향이 나타났다. 2. 착협고는 재식거리가 짧을수록 높아지는 경향이 나타났으며 '홍언'에서는 $30{\times}10cm$ 처리구에서 5.0 cm로, '아라리'에서는 $30{\times}10cm$$50{\times}10cm$ 처리구에서 8.8 cm로 가장 높았다. 3. 주당협수와 주당립수는는 두 품종 모두 재식거리가 길어질수록 많아지는 경향이 나타났으며, 백립중에서는 '홍언'에서는 재식밀도간의 차이가 나타났으나, '아라리' 에서는 재식밀도간 차이는 나타나지 않았다. 4. 수량성은 조간거리 40cm${\times}$주간거리 15 cm 처리구에서 두 품종 모두 (285, $374kg{\cdot}10a^{-1}$) 가장 높았다.

Effect of planting density and seeding date on the tiller occurrence, growth and yield of sorghum (Sorghum bicolor L.)

  • Han, Tae Kyu;Yoon, Seong Tak;Jeong, In Ho;Kim, Young Jung;Yu, Je Bin;Yangjing, Yangjing;Ye, Min Hee
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.348-348
    • /
    • 2017
  • This experiment was conducted to investigate the aspect of tiller occurrence, growth and yield of sorghum according to planting density and sowing date. The subject of this experiment is to supply basic data to inhibit non-productive tillers uneconomical and cumbersome for mechanical harvesting. Also another subject was to evaluate optimum planting density and sowing date in central district area. Total number of tillers was more in 80cm ridge than 60cm ridge and it was increased as the planting distance was wider from 15cm to 30cm on the each ridge. Ratio of effective tillers was higher in 60cm ridge than 80cm ridge and it was decreased as planting distance was wider from 15cm to 30cm. The lower the planting density, the more increased total number of tillers, whereas effective tillers were decreased as planting density was high. Average of total number of tillers of three varieties was higher in sowing date of 2 May (1st sowing date), whereas ratio of effective tillers was the highest in sowing date of 23 May (2nd sowing date). Hwanggeumchal showed the highest total number of tillers (1.2 tillers), while Moktaksusu had the lowest total number of tillers (0.8 tillers) among three varieties. There were no significant difference between planting density and days to heading and ripening date from seeding. Culm length increased as planting density was high, but ear length, grains per ear and 1000 grain weight were decreased on the other hand. The highest yield of sorghum per 10a was obtained from $60{\times}20cm$ planting density among 6 planting densities.

  • PDF

Comparative Study of Seeding and Culture Methods to Vascular Smooth Muscle Cells on Biodegradable Scaffold

  • Kim, Dong-Ik;Park, Hee-Jung;Eo, Hyun-Seoun;Suh, Soo-Won;Hong, Ji-Hee;Lee, Min-Jae;Kim, Jong-Sung;Jang, In-Sung;Kim, Byung-Soo
    • Journal of Microbiology and Biotechnology
    • /
    • 제14권4호
    • /
    • pp.707-714
    • /
    • 2004
  • How to improve the cell culture method on scaffolds is important in the tissue engineering fileld. In this study, we optimized seeding and culture methods to vascular smooth muscle cells (VSMCs) on biodegradable polymer scaffold. The primary culture of VSMCs obtained from canine external jugular vein was accomplished by applying the explant-derived method. The primary cultured VSMCs were seeded into scaffolds and then cultured by using various different methods; static or dynamic seeding, static or dynamic culture. The difference in proliferative response of VSMCs was analyzed with an alamar blue assay. Cell-polymer construct was examined by histochemical method and scanning electron microscopy. Mesh type scaffold ($10 \times 10 \times0.4 mm$) was made of polyglycolic acid (PGA) suture thread. The PGA mesh type scaffold was 45% in porosity, and 0.03 g in weight. The primary cultured VSMCs were confirmed with immunohistochemical staining using monoclonal anti-$\alpha$-smooth muscle actin. The density and distribution of proliferated VSMCs within the scaffold and cellular adherence on the surface of the scaffold showed better results in the static seeding condition than in the dynamic condition. Under the same condition of seeding method as the static condition, the dynamic culture condition showed enhanced proliferation rates of the VSMCs when compared to the static culture condition. In conclusion, to improve the VSMCs proliferation in vitro, static seeding is better than the dynamic condition. In the culture condition, however, culture under the dynamic status is better than the static condition. This was a pilot study to manufacture artificial vascular vessel by tissue engineering.

경운방법의(耕耘方法) 차이(差異)가 토양물리성(土壤物理性)과 직파(直播)벼생육(生育)에 미치는 영향(影響) (Effects of Different Tillage Practices on Changes of Soil Physical Properties and Growth of Direct Seeding Rice)

  • 조현준;조인상;현병근;신제성
    • 한국토양비료학회지
    • /
    • 제28권4호
    • /
    • pp.301-305
    • /
    • 1995
  • 논토양(土壤) 경운(耕耘) 및 관기방법(灌漑方法)에 따른 토양(土壤)의 물리적특성(物理的特性)과 수도생육(水稻生育)의 차이(差異)를 구명(究明)하고자 석천통(石泉統)에서 무경운(無耕耘) 건답(乾畓), 무경운(無耕耘) 담수(湛水), 경운(耕耘) 건답(乾畓), 경운(耕耘) 담수구(湛水區)와, 관행(慣行)(기계이앙경운(機械移秧耕耘)-로타리) 등(等)의 5개(個) 처리구(處理區)를 두고 수도(水稻)를 3년간(年間) 재배(栽培)하면서 토양(土壤)의 물리적특성(物理的特性)과 수도생육(水稻生育)을 조사(調査)한 시험결과(試驗結果)는 다음과 같다. 토양(土壤)의 가비중(假比重)과 경도(硬度)는 경운구(耕耘區)보다는 무경운구(無耕耘區), 담수구(湛水區)보다는 건답구(乾畓區)에서 높았다. 무경운(無耕耘), 건답구(乾畓區)의 투수원도(透水速度)는 경운비토구(耕耘碑土區)보다 56% 빨라 전관개기간중용수량(全灌漑期間中用水量)이 27% 증가(增加)되었으나, 무경운구(無耕耘區)에서는 관행구(慣行區)보다 낙수기이후(落水期以後) 수분감소(水分減少)가 빨라 농기계(農機械) 작업(作業)이 유리(有利)한 조건(條件)이었다. 층위별(層位別) 뿌리분포(分布)를 보면 무경운구(無耕耘區)는 주로 표토(表土)에 분포(分布)하였다. 출수기(出穗期)는 무경운구(無耕耘區)가 경운구(耕耘區)보다 2일(日)정도 빠르고 건답구(乾畓區)가 담수구(湛水區)보다는 3일(日) 빨랐다. 처리별(處理別) 수도생육(水稻生育)은 건답구(乾畓區)보다는 담수구(湛水區)에서 양호(良好)하였고 줄기매몰(埋沒) 깊이는 무경운담수구(無耕耘湛水區)에서 지상부(地上部)로 0.9cm 올라와서 도복(倒伏)의 위험(危險)이 있었다. 무경운시(無耕耘時) 3년(年) 평균(平均) 정조수량(正租收量)은 건답구(乾畓區) 및 담수구(湛水區)가 각각(各各) 5.55M/T/ha, 5.16M/T/ha로써 관행구(慣行區) 6.31M/T/ha 보다 각각(各各) 12.0%, 18.2% 감수(減收)되었으며 대체로 무경운시(無耕耘時)는 건답구(乾畓區), 경운시(耕耘時)에는 담수구(湛水區)에서 수량(收量)이 많은 경향(傾向)이었다.

  • PDF