Effect of Nitrogen Management on Rice Growth and Yield under Different Seedling Density in Puddled -soil Drill Seeding

벼 무논골뿌림 재배시 입모수별 질소시비방법이 생육 및 수량에 미치는 영향

This study was carried out to clarify the proper nitrogen application methods under the different seedling density in puddled-soil drill seeding of rice. Seedling density was adjusted as 30, 60, 90, 120 and 150ea/$m^2$ just after emergence and nitrogen was applied with five methods including conventional respectively. The maximum tillering stage was shorten as the seedling density was increase but decreased the percentage of productive tillers. Lodging was occurred serverely as the seedling was more than 120ea/$m^2$, when nitrogen was applied at panicle initiation stage. Grain yield wasn't significantly different among seedling densities when it was more than 60ea/$m^2$, but the density of 30ea/$m^2$ was decreased. It wasn't significantly different among the nitrogen application methods when it was more than 90ea/m, but was higher at early application of tillering fertilizer (T$_2$) than conventional method when the seedling density was less than 60ea/$m^2$. Supposing that the yield of reseeding is the same as optimum seedling density, minimum seedling density needs for reseeding would be less than 55 ea/$m^2$ as the aspect of income allowed for managing expense.

벼 무논골뿌림 재배시 입모수별 적정 질소 시비방법을 구명하고자 입모수 및 질소시비방법을 달리하여 생육 및 수량을 검토한 결과를 요약하면 다음과 같다. 1. 최고분얼수는 입모수 30개/$m^2$ 에서 파종후 60일경, 60개/$m^2$ 는 파종후 55일경, 90~150개/$m^2$ 에서는 파종후 50일경이었으며, 유효경 비율은 입모수가 많을수록 적었다. 2. 수수는 입모수 30개/$m^2$ 에서만 300개/$m^2$ 내외로 다소 적었으나 60개/m 이상에서는 입모수간에 별 차이가 없었고 입모수가 적었을 때는 실행 시비방법보다 조기분얼비 시용(T2)에서 많았다. 3. 도복은 입모수 120개/$m^2$ 이상에서 다소 발생하였고 시비방법간에는 수비를 시용한 실행 분시방법에서 다른 시비방법보다 다소 심하게 발생하는 경향이었다. 4. 수량은 입모수 60개/$m^2$ 이상에서는 입모수간에 유의차가 없었고 입모수가 적었을 때는 실행 시비방법보다 3엽기에 분얼비를 시용하는 것이 증수되었으며 입모수 90개 이상에서는 시비방법간에 별 차이가 없었다. 5. 재파시 경영비 증가를 감안한 소득으로 본 재파한계 입모수는 55개/$m^2$ 이었다.