• Research in Plant Disease
• /
• v.21 no.2
• /
• pp.45-49
• /
• 2015

Seeds of wheat (Triticum aestivum L. cv. Olgeurumil) were infected with Penicillium sp. at mean infection rate of 83%. Penicillium sp. was detected in endosperm with bran but not in embryo. Gaseous chlorine dioxide ($ClO_2$) effectively inhibited growth of Penicillium sp. at concentration of 5 to $20{\mu}g/ml$. As treatment duration was extended from 1 to 3 h, growth of Penicillium sp. was completely suppressed even at $10{\mu}g/ml$. There was no significant reduction in the incidence of Penicillium sp. at 30% relative humidity (RH). However, the incidence of Penicillium sp. was 27.7% at 50% RH, further those were 3.5% and 0.2% at 70% and 80% RH, respectively. Seed germination was not affected by $ClO_2$ treatment at all the RH conditions. Water-soaked seeds (30% seed moisture content) showed a drastic reduction in the incidence of Penicillium sp. when treated at more than $10{\mu}g/ml$ of $ClO_2$. The incidences of Penicillium sp. were 3.3, 1.8 and 1.2% at 10, 15 and $20{\mu}g/ml$, respectively. The incidence of Penicillium sp. in dry seeds with 9.7% seed moisture content did not reduce when treated with 5 and $10{\mu}g/ml$ at 50% RH although it tended to decrease as $ClO_2$ concentration increased to $20{\mu}g/ml$. Seed germination was not affected by $ClO_2$ treatment at the tested concentrations. These results indicated that gaseous $ClO_2$ was effective disinfectant to wheat seeds infected with Penicillium sp. and that the effectiveness of $ClO_2$ strongly increased when moisture content around or inside of the seed was increased.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.5
• /
• pp.785-789
• /
• 1995

In order to optimize the batch expression of sesame oil, recovery of expressed oil(REO) from roasted and unroasted sesame seeds were observed at different temperature, pressure, pressing duration and moisture content, and relatinship between REO and effects of expression factors were analysed. REO was high at 2.5~4.5% moisture content, 30~$50^{\circ}C$ and 30~50MPa, and decreased abruptly with increasing moisture content above 4.5%. The optimum temperature, pressure, pressing duration and moisture content were $40.1^{\circ}C$, 54.4MPa, 21.7min and 1.3% for unroasted seeds and $44.4^{\circ}C$, 37.8MPa, 14.4min and 2.52% for roasted seeds, respectively. REO in optimum condition was 84.6% in unroasted seed and 81.7% in roasted seed. From the statistic analysis between effects of expression factors and REO, importance of their effects was decreased in the order of moisture content, pressure, temperature and pressing duration. And also interaction effects were high in $pressure{\times}moisture$ content, $temperature{\times}moisture$ content and temperature pressure. The multiple regression equation between REO(Y) and temperature(T), pressure(P), moisture content(M), and pressing duration(D) were as follows ; $Y=18.20$ $35.66P$＋$24.52M-4.45P^{2}-1.20TM-4.02PM-6.62M^{2},\;r^{2}=0.89$, for unrosated sesame seed, $Y=117.93$＋$16.40P-58.61M-2.75P^{2}$＋$1.79TM-1.65PM$＋$7.16M^{2},\;r^{2}$$=0.91$ for roasted sesame seed.

• Journal of Biosystems Engineering
• /
• v.40 no.3
• /
• pp.212-223
• /
• 2015

Purpose: Physical properties of Detarium microcarpum seeds were investigated as a function of moisture content to explore the possibility of developing bulk handling and processing equipment. Methods: Seed size, surface area, and 1,000-seed weight were determined by measuring the three principal axes, measuring area on a graph paper, and counting and weighing seeds. Particle and bulk densities were determined using liquid displacement and weight in a measuring cylinder, respectively. Porosity was computed from particle and bulk densities. Roundness and sphericity were measured using shadowgraphs. Angle of repose and static and kinetic coefficients of friction were determined using the vertical cylindrical pipe method, an inclined plane, and a kinetic coefficient of friction apparatus. Results: In the moisture range of 8.2%-28.5% (db), the major, intermediate, and the minor axes increased from 2.95 to 3.21 cm, 1.85 to 2.61 cm, and 0.40 to 1.21 cm, respectively. Surface area, 1,000-seed weight, particle density, porosity, and angle of repose increased from 354.62 to $433.19cm^2$, 3.184 to 3.737 kg, 1060 to $1316kg/m^3$, and 30.0% to 53.1%, respectively, whereas bulk density decreased from 647.6 to $617.2kg/m^3$. Angle of repose increased from $13.9^{\circ}$ to $28.4^{\circ}$. Static and kinetic coefficients of friction varied between 0.096 and 0.638 on different structural surfaces. Conclusions: Arithmetic mean, geometric mean, and equivalent sphere effective diameters determined at the same moisture level were significantly different from each other, with the arithmetic mean diameter being greatest. Surface area, 1,000-seed weight, particle density, porosity, and angle of repose all increased linearly with moisture content. Bulk density decreased linearly with moisture content. The coefficients of friction had linear relationships with moisture content. The highest values of static and kinetic coefficients of friction were observed on galvanized steel and hessian fabric, respectively, whereas the lowest values were observed on fiberglass.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.2
• /
• pp.150-155
• /
• 1986

An experimental study was undertaken to obtain the basic information on the effect of seed moisture content and cylinder speed of thresher on the mechanical damage and seed germination in soybeans. The moisture content at maturity was the highest in stern and followed by seed and pod-shell for Hwang-keurnkong and also the highest in stern and followed by pod-shell and seed for Danyeobkong in that order. The variation in the moisture contents of stern, seed, and pod-shell in a day on the 7th day after maturity showed gradually decreasing trends from 7 :00 in the morning to 17 :00 in the afternoon. On the 14th day after maturity, the moisture content of pod-shell was higher than that of seeds up until 11 :00 in the morning but it was higher in the seeds after that. The greater the cylinder speed and the higher the moisture content of seeds, the higher the percentage of seeds damaged was resulted. At the same time, the percentage of seeds damaged was higher in Hwangkeumkong large seed sized than in Danyeobkong small seed sized at the same cylinder speed. Considering the seed yield, percentage of seeds damaged, percentage of seeds germinated, threshing efficiency and drying, etc., the appropriate cylinder speed was believed to be about II m per second and the most appropriate moisture contents of seeds for threshing were believed to be about 15-20%.

• Journal of Biosystems Engineering
• /
• v.33 no.2
• /
• pp.101-105
• /
• 2008

Some physical properties of rapeseed such as geometric properties (linear dimensions, sphericity, seed volume, surface area) and gravimetric properties (the mass of one thousand seeds, bulk density) were analyzed at five levels of moisture content of 10.03, 14.91, 20.07, 25.06 and 30.12% (w.b.). The physical properties of rapeseed were evaluated as a function of seed moisture content. In the moisture range, when the moisture content increase, sphericity decreased from 0.946 to 0.927, and geometric mean diameter, seed volume and surface area increased from 2.17 to 2.31 mm, 5.58 to $6.88 \;mm^3$ and 14.76 to $16.77\;mm^2$ respectively. Mass of one thousand seeds increased from 5.04 to 6.46 g. Bulk density decreased from 579.3 to $549.2\;kg/m^3$ due to swelling of the seed.

• Journal of Forest and Environmental Science
• /
• v.36 no.4
• /
• pp.267-273
• /
• 2020

Diospyros mespiliformis is a highly valued and threatened tree species within the Sahelo-Sudanian zone of Africa, but its seed germination requirements under cultivation are not well researched. In a first experiment which aimed at determining germination response of seeds to dehydration, fresh seeds were dried at room temperature for 26 days during which their moisture content, their germinability, and their viability were monitored at two-day intervals. In the second experiment, 14 pre-germination treatments were tested for their effect on the germination of dried seeds. Results showed that fresh seeds had 52.7% moisture and achieved 97.7% germination. As seeds were dried, percentage germination gradually decreased with decreasing moisture content and reached 0% when moisture content had dropped to 18%. Meanwhile, seed viability remained at 100% over drying duration. Seeds that were not germinated after air dry also recorded 100% viability. The most effective treatment for inducing germination of dried seeds was scarification using 98% sulfuric acid for 30 min which resulted in 96.6% germination. This study reports for the first time in D. mespiliformis seeds a desiccation-induced dormancy which can be efficiently alleviated by acid scarification. This study provides useful information that will contribute to efficient management of D. mespiliformis seed resources for propagation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.4
• /
• pp.322-325
• /
• 2003

Controlled hydration treatment of tobacco seeds enhanced seed performance greatly without additional materials associated with conventional osmotic or solid matrix priming technique. The seeds were hydrated by adding water to a level from 10 to 60% by 5% increments and incubated for 8 days at $25^{\circ}C$. After the treatment, the seeds were dried to the original seed moisture content under $20^{\circ}C$ for 72 hours. The moisture content of tobacco seeds equivalent to 35% by the hydration treatment gave the greatest improvement in germination rate and speed compared to untreated or polyethylene glycol (PEG) primed seeds, especially at low temperature of $15^{\circ}C$.

• Korean journal of food and cookery science
• /
• v.14 no.5
• /
• pp.584-588
• /
• 1998

Red pepper powders with variuos seed contents (0%, 10%, 20%) and particle sizes were stored at 0$^{\circ}C$, 20$^{\circ}C$, and 30$^{\circ}C$ for 90 days, and the changes in their characteristics were monitored. The initial moisture content was about 13%, and the powders were packed in 0.1 mm-thick polypropylene (PP) bags. Moisture content of each power remained constantly, so PP bags appeared to be effective to prevent moisture transmission. All the values of L＊, a＊ and b＊ were higher in fine particles than in coarse particles. Storage at 0$^{\circ}C$ did not change any color values, however, overall color values devreased apparently when stored at 30$^{\circ}C$ for 90 days. Capsanthin contents decreased gradually at all storage temperatures and more rapidly at higher temperature. The contents of capsaicinoids in fine particles (49∼59 mg%) were twic as much as those in coarse particles (15∼36 mg%), and they did not change throughout the storage.

• Culinary science and hospitality research
• /
• v.23 no.4
• /
• pp.116-124
• /
• 2017

This study was investigated quality characteristics of gluten-free noodles added guar gum and basil seed gum (BSG). Gluten-free noodles were prepared using corn flour and corn starch and added 1% and 2% of guar gum and basil seed gum. Water binding capacity was measured by centrifuge, and moisture content was obtained by moisture analyzer. Color of noodles was measured from the midsection of noodles. Water absorption of noodles was calculated by weight of uncooked and cooked noodles. pH of noodles was measured by pH meter. Texture and tensile strength were obtained by rheometer. SPSS 12.0 program was used for significant differences by Duncan's multiple range test. Water binding capacity of noodles was the highest in 2% basil seed gum but 1% guar gum was the lowest. Moisture content was not different in uncooked noodles, but 1% guar had the highest moisture content in cooked noodles. Water absorption of noodles was high in basil seed gum group. pH of noodles was more increased in guar gum additions than basil seed gum additions. For hardness, control had the lowest as 16.09 N, but 2% guar gum showed the highest as 28.40 N. Tensile strength of noodles was increased by adding gums. These results suggested that 1% basil seed gum could be good materials for manufacturing gluten-free noodles in order to improve quality characteristics.

• Journal of Korean Society of Forest Science
• /
• v.112 no.4
• /
• pp.442-450
• /
• 2023

This study sought to determine the desiccation tolerance and storage behavior of Sarcandra glabra seeds to assist in the establishment of an ex-situ conservation strategy for the species. The basic germination characteristics of S. glabra seeds were investigated. Subsequently, the seeds were dried to various desiccation levels to allow for analysis of their germination characteristics and seed integrity. In addition, the seeds were subjected to germination tests after being stored for different durations. The initial seed moisture content following the removal of the fleshy fruit was 32.8%, and the fresh seeds maintained their seed viability even after a decrease in the seed moisture content to 4.8%, while the germination percentage was 81.0%. The germination percentage of the seeds decreased to 55.0% and 30.0% when they were desiccated to moisture contents of 2.3% and 2.2%, respectively. By contrast, when the stored seeds were desiccated, they maintained their seed viability and vigor at a moisture content of 18.6%; however, when the moisture content decreased below 5.0%, both the seed viability and vigor significantly declined and the germination percentage fell below 20.0%. Furthermore, analysis of the seed leachate revealed that the decrease in the seed viability and vigor was associated with both increased electrical conductivity and increased concentrations of inorganic compounds such as potassium and calcium. In conclusion, the findings of this study show S. glabra seeds to possess desiccation tolerance that falls somewhere between the recalcitrant and intermediate seed types, with the observed variations depending on the degree of deterioration.