• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.spc
• /
• pp.78-83
• /
• 2008

Soybean [Glycine max (L.)] is a major source of protein for human and animal feed. Inter- and intra-genotype variation of soybean protein has been investigated by soybean researchers. However, limited sample amount of soybean single seed there is no report that investigated intra-plant variation of soybean protein within soybean plant. Recently a non-destructive NIR (near-infrared reflectance) spectroscopy using single seed grain to analyze seed protein was developed. The objectives of this study were to understand variation of seed protein content within plant and to determine the amount of minimum sample size which can represent protein content for a soybean plant. Frequency distribution of protein content within plant showed normal distribution. There was an intra-cultivar variation for protein content in soybean cultivar Seonnogkong. Difference of protein content among single plants of Seonnokong was recognized at 5% level. Seeds in lower position on plant stem tended to accumulate more protein than in higher position. There was significant difference for protein content between sample size 5 seeds and sample size of more than 5 seeds (10, 20, 30, 40, and 50 seeds) at a soybean plant with 57 seeds however no difference was recognized among sample size (5, 10, 20, and 30 seeds) at a soybean plant with 33 seeds. Around 20% seeds of soybean from single plant needed to determine the protein content to represent protein content of single soybean plant. This study is the first one to report evidence of intra-plant variation for proteincontent which detected by non-destructive NIR spectroscopy using single seed grain in soybean.

• New & Renewable Energy
• /
• v.9 no.3
• /
• pp.36-42
• /
• 2013

To secure raw materials of biodiesel production, the possibility of camellia (C. japonica L.) and tea (C. sinensis L.) seed oil was studied to produce biodiesel. In this research, crude oil contents and fatty acid compositions of seeds were analyzed by Solxlet and Gas chromatography (GC). The oil contents in the seeds of camellia were 69.8%~73.8%, and tea were 26.3%~29.4%. Among the fatty acids of camellia and tea oil, oleic acid was dominant. The unsaturated fatty acids accounted for 88.4% and 80.2% of the whole fatty acids of camellia and tea seed oil. Total seed oil content and fatty acid composition of tea seed were influenced by collecting date. Across maturation period, oil content of tea seed averaged 18.3% on $6^{th}$ September increasing to 27.9% by $11^{th}$ October. For largest seed yield and oil content, the optimum time to harvest tea is in middle october, and camellia is late september and thereafter. The extraction efficiency of oil from seeds by extraction methods was determined. Biodiesel were synthesized in 92.1~92.8% yields from camellia and tea oils by transesterification. The biodiesel was characterized by its physical and fuel properties including oxidation stability, iodine value and cold filter plugging point (CFPP). Oxidation stability of camellia was 8.6~8.8 hours and tea was 2.9~3.6 at $110^{\circ}C$. Camellia oil had considerably better oxidation stability and CFPP than tea oil.

• Journal of the Korean Ceramic Society
• /
• v.35 no.1
• /
• pp.66-78
• /
• 1998

the microstructure and mechanical properties of seeded and ball-milled dry gels prepared by boehmite sol-gel method were discussed. The densification of seeded gels was improved with increasing seed content namely the number of seed The number of seed was 1.09, 3.35, 5.72${\times}$1012/cm3 boehmite when seeded with 1, 3, 5wt% respectively The ball milled gel contained about 0.5wt% seed and the number of seed was 4.72${\times}$1012/cm3 boehmite. The sintered density of 5wt% seeded gel was below 80% when sintered at 1300$^{\circ}C$ for 1h. On the other hand that of ball milled gel was very improved and reached to 97% In the case of 3wt% seeded gels the density over 97% was attained when sintered at 1500$^{\circ}C$for 1h. and the grain of the sintered body was several micrometers in size. However the sintered body of ball milled gel showed grain size of submicrometer when sintered at 1300$^{\circ}C$ for 1h. And this specimen showed highest harness value of 1900kg/mm2 The fracture toughness increased with increasing sintering temperature. The sintered body of ball milled gel showed the largest grain size and the highest fracture toughness without regard to sint-ering temperature.

• Korean Journal of Plant Resources
• /
• v.21 no.3
• /
• pp.171-177
• /
• 2008

Variations in antioxidant capacity of leaves and characteristics of seed germination among five Hibiscus hamabo populations in Korea were evaluated. While the leaves of H. hamabo from Shincheon contained highest Na concentration, those from Hado and Ohzo does lowest. MDA content and SOD activity didn't show significant difference among populations, but total protein and anthocyanin content were significantly different among five populations. The filled seed rates of five populations were ranged from 92.0 to 98.7%, and the moisture contents of seeds from Shinyang and Soando were lower than that of R. syriacus (5.18%). The fresh weights of H. hamabo from Hado and Ohzo were the highest and those of seeds from Shinyang and Soando were the lowest. Significant variations among H. hamabo populations were detected for all seed germination characters: percentage of germination, average germination time and germination rate and uniformity. SOD activities of seeds from Onpyoung and Soando were the highest of five populations, and total protein concentrations of seeds in Ohzo and Shinyang populations were higher than those of other populations. H. hamabo is considered exposed to salt stress and all characteristics of seed germinations were inferior to other species.

• The Korean Journal of Food And Nutrition
• /
• v.35 no.1
• /
• pp.62-73
• /
• 2022

Omija seed oil was extracted from Omija seeds, a by-product of Omija, using an eco-friendly pressed extraction method. Physicochemical properties and antioxidant activities of 12 extracts using different combinations of seed moisture content (5, 7.5, and 10%) and extraction temperature (25, 49, 75, and 100℃) were then investigated. The highest extraction yield was 31.33% at moisture of 5% and temperature of 75℃. The lowest acid value was 4.18±0.25 at moisture of 5% and temperature of 49℃or moisture of 7.5% and temperature of 25℃. Peroxide value, iodine value, and saponification value were the lowest at 0.64±0.56 meq/kg, 159.38± 6.03, and 57.60±9.40, respectively, at moisture of 5% and temperature of 25℃. The content of total polyphenolics was the highest at 4,413±125 mg TAE/100 g when the moisture content was 10% and the extraction temperature was 25℃. DPPH radical scavenging activities of oil extracts at 20~100 mg/mL were 28.68±7.30~87.65±2.20%. The maximum antioxidant activity and IC₅₀ were 87.65±2.20% and <20 mg/mL, respectively, for extract obtained at moisture of 10% and temperature at 100℃. As a result, the extraction yield, acid value, peroxide value, iodine value, saponification value, and so on were excellent at moisture content of 5% and extraction temperature of 25℃ or 49℃. However, the content of total polyphenolic compounds and antioxidant activity were the highest at moisture of 10% and extraction temperature of 100℃. In conclusion, extracting Omija seed oil from Omija seeds, a by-product of Omija, is effective with a pressed extraction method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.16 no.5
• /
• pp.97-110
• /
• 1992

Rape-seed oil has high viscosity and high rubber content like other vegetable oils. When crude rape-seed oil obtained by a general oil extraction process is used in a diesel engine, automization condition during injection is not good and a large amount of combustion product is doposited in a combustion chamber. The improvement of a diesel engine is required to use rape-seed oil as a diesel engine fuel. In this study, the physical and chemical properties and combustion characteristics of rape-seed oil were investigated. The auxiliary aid was developed to improve automization condition and the effect of the auxiliary injection aid on the performance of a diesel engine was determined. The results are as follows. 1) Oil content of rape-seed is 45%. The exraction rate is 33%. The resuls show higher values compared to those of other vegetable oils. 2) The viscosity of rape-seed oil is 50.8 cSt and nearly 14 times of diesel oil viscosity. 3) The heating value and flash point of rape-seed oil are 9720kcal/Kg and 318$^{\circ}C$, respectively. 4) In case rape-seed oil is used as fuel, brake horse power, specific fuel consumption and brake thermal efficiency are compared to those of diesel oil. The results of rape-seed oil show 3.6%, 12.7% and 3.1% higher values. 5) Particle size of injection fuel with the auxiliary injection aid on the performance of a diesel engine was determined. The results are as follows. 1) Oil content of rape-seed is 45%. The extraction rate is 33%. The results show higher values compared to those of other vegetable oils. 2) The viscosity of rape-seed oil is 50.8 cSt and nearly 14 times of diesel oil viscosity. 3) The heating value and flash point of rape-seed oil are 9720kcal/Kg and 318.deg.C, respectively. 4) In case rape-seed oil is used as fuel, brake horse power, specific fuel consumption and brake thermal efficiency are compared to theose of diesel oil. The results of rape-seed oil show 3.6%, 12.7% and 3.1% higher values. 5) Particle size of injection fuel with the auxiliary injection aids is 100.mu.m smaller than that od injection fuel without the aid. 6) Brake horse power and brake thermal efficiency with the auxiliary injection aid increase 5.07% and 6.07%, respectively. However, specific fuel consumption decreases 3.85% with the auxiliary injection aid.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.99-105
• /
• 2010

Proximate composition of whole hemp seed, paste viscosity of whole hemp seed pellets, bulk density, color, compression force, water solubility and absorption index and bowl life of whole hemp seed flakes manufactured by extrusion process were determined to evaluate whole hemp seed as flake additive. Extrusion process conditions were 35% of moisture content and 90, 100 and 110$^{\circ}C$ of barrel temperature. Content of moisture content, crude protein, crude fat, crude ash from whole hemp seed were 5.67${\pm}$0.02%, 25.93${\pm}$0.16%, 28.21${\pm}$0.56% and 7.70${\pm}$0.08%, respectively. The pellets hemp seed at 100 or 110$^{\circ}C$ had higher paste viscosity as compared to those pellet at 90$^{\circ}C$. The bulk density values of all hemp seed flakes were between 0.24 to 0.43 g/mL, depending on the barrel temperatures. The hardness of flake increased with decreasing percentage of hemp seed in flakes. An increase in barrel temperature from 90$^{\circ}C$ to 110$^{\circ}C$ resulted in increase of WSI and decrease of WAI. The bowl life of hemp seed flakes was increased from 5.8 to 15.5 min with the decrease in percentage of hemp seed. The highest overall quality was showed in flake added with 20% of hemp seed.

• Journal of the East Asian Society of Dietary Life
• /
• v.9 no.1
• /
• pp.74-80
• /
• 1999

The proximate composition, pH, vitamins and minerals in sunflower seed sprout were investigated to furnish basic data for utilization in health food or processed food. The pH of sunflower seed sprout was 5.70. The contents of moisture, crude protein, crude fat, crude ash and crude fiber of sunflower seed sprout were 94.7%, 1.3%, 0.3%, 1.3% and 1.6%, respectively. The vitamin A, vitamin B$_1$, vitamin B$_2$, vitamin C and niacin contents in sunflower seed sprout were 114.411. U%, 0.06mg%, 0.05mg%. 5.90mg% and 0.80mg%, respectively. The contents of Ca, P, Fe, Na, K, Mn, Cu, Zn and Mg in sunflower seed sprout per 100g were 80.00mg, 4.85mg, 3.63mg, 8.25mg, 180.90mg, 1.35mg, 0.43mg, 1.85mgand 66.35mg, respectively. The crude ash and crude fiber content of sunflower seed sprout were 3 or 4 times higher than those in the sprout of radish seed, mung bean, soybean or alfalfa, respectively.

• Journal of the Korean Ceramic Society
• /
• v.35 no.8
• /
• pp.878-884
• /
• 1998

Synthesis of high purity mullite from korean resourceful kaolin and water-soluble aluminium salts was in-vestigated by addition of mullite seed. Single phase of mullite was formed at 1350$^{\circ}C$ however its mullite con-tent was 31-33% Maximum content of mullite synthesized from kaoin aluminium nitrate and 8wt% mul-lite seed was 98% at 1600$^{\circ}C$ for 4 hours.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.2
• /
• pp.255-260
• /
• 2016

This study aimed to investigate the effect of red pepper seed powder addition on the chemical compositions, cooking characteristics, and sensory properties of tteokgalbi. Tteokgalbi was prepared by addition of 0% (control), 1%, 2%, 3%, and 4% red pepper seed powder. The moisture and ash contents of samples increased with increased content of red pepper seed powder. In addition, the pH value, CIE $a^*$ value, and CIE $b^*$ value of uncooked and cooked samples increased with higher content of red pepper seed powder. However, cooking loss, diameter reduction, and thickness reduction of samples decreased with increasing content of red pepper seed powder. The hardness, gumminess, and chewiness of samples increased with higher content of red pepper seed powder, and the sensory evaluation of tteokgalbi containing 3% red pepper seed powder was the highest. Therefore, usages of red pepper seed powder can improve quality characteristics of tteokgalbi.