• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.4032-4038
• /
• 2014

Vegetable fatty acid solid soap requires a drying process for moisture evaporation and hardness after being manufactured through saponification. Although the soap is manufactured by mixing additives mainly from natural ingredients, existing studies have focused primarily on the usability of vegetable solid soap. Consequently, research into the physical properties of vegetable fatty acid solid soap mixed with natural ingredients has been unsatisfactory. Therefore, this study attempted to compare and observe the changes in the physical properties (pH, surface tension, critical micelle concentration, and cleansing power) of solid soap in accordance with the drying period and additives (tea tree E.O and $TiO_2$) using pH paper, the Du Nouy measurement method, sedimentation method, and ultrasound washer. Regardless of the mixture with additives, vegetable fatty acid solid soap showed the same pH, and there was no change in the pH while maintaining pH 8 beginning from the $2^{nd}$ weeks to $12^{th}$ weeks of drying. In addition, as a result of measuring the surface tension and CMC, regardless of the drying period, only the soap added with $TiO_2$ showed an even value of 62.5mg/L, whereas the other soap specimens showed a decline in CMC to 25mg/L on the fourth week of drying. As a result of measuring the detergency, the removal efficiency of vegetable fatty acid solid soap mixed with tea tree E.O and $TiO_2$ and dried for four weeks was 4.50~4.65%, which was higher than that of the vegetable fatty acid solid soap without additives (3.62~3.92%).

• Journal of Environmental Health Sciences
• /
• v.24 no.1
• /
• pp.132-140
• /
• 1998

Laboratory-scale experiments were conducted using a three-stage rotating biological contactor unit followed by lime precipitation and sedimentation with effluent recycle to the first stage. The purpose of this study was to evaluate the effects of hydraulic loadings of 0.031-0.076 $m^3/m^2/d and recycle ratio of 1 to 3 on the simultaneous removal of organics and nutrients from domestic wastewater. Lime was added to maintain pH of 10.4-11.0 in the coagulation-flocculation reactor. Results showed that the highest nitrogen removal rate of 70.5% occurred at the lower hydraulic loading of 0.031 $m^3/m^2/d at a recirculation rate of 300%, and similarly, highest nitrification occurred at the same hydraulic loading and recycle ratio. Concentration of ammonia nitrogen in the effluent was less than 1 mg/l at the same operating conditions for higher nitrogen removal. Whereas, high BOD and COD removal was observed at hydraulic loading rate of 0.054 $m^3/m^2/d, and high removal of organic matter was evident from the consistent low COD and BOD value. Results obtained from the operating condition of higher loading rate, 300% of recycle rate showed the highest removals. Increasing in recycle rate and hydraulic loading rate increased the volatile solids fraction of the sludges generated to the extent of 47% at 0.076 $m^3/m^2/d hydraulic loading and 300% recirculation rate. Since pH in the flocculator was maintained at the pH of 10.4-11.0, above 90% removal of phosphorus was obtained. Average concentration of suspended solids was always maintained over 40 mg/l in the effluent. Therefore an RBC unit operating at a hydraulic loading near 0.031 $m^3/m^2/d with a recycle rate of 300% is a viable and feasible alternate conditions to produce an effluent with relative low organic matter and phosphorus, provided that there is a neutralization unit to control the pH and SS of the effluent.

• Environmental Mutagens and Carcinogens
• /
• v.8 no.1
• /
• pp.1-12
• /
• 1988

The effects of aphidicolin (APC), an inhibitor of DNA polymerase alpha, or 2', 3'-dideoxythymidine 5'-triphosphate (ddTTP), an inhibitor of DNA polymerase beta, on the repair of DNA damage induced by ethyl methanesulfonate (EMS) or bleomycin (BLM) were investigated in Chinese hamster ovary (CHO)-K1 cells. Three assays were employed in this study: unscheduled DNA synthesis, alkaline elution and alkaline sucrose gradient sedimentation. It was shown that APC or ddTTP inhibited DNA induced by EMS, and thus, the post-treatment with APC or ddTTP following EMS treatment was resulted in the more amount of unscheduled DNA synthesis, and the more accumulation of DNA single-stand breaks than the cells post-incubated without APC or ddTTP. While, in the BLM induced DNA repair, only ddTTP inhibited DNA repair induced by BLM. And thus, the groups post-incubated with or without APC after BLM treatment had the same value in the amount of unscheduled DNA synthesis and of DNA single-strand breaks, while post-treatment with ddTTP was resulted in the increased amount of unscheduled DNA synthesis and the increased DNA sin -strand breaks than the group without ddTTP. These results suggested that both of DNA polymerase $\alpha$ and $\beta$ participated in the repair of DNA damage induced by EMS, but in BLM-induced DNA repair, polymerase $\beta$ participated.ipated.

• Korean journal of applied entomology
• /
• v.17 no.3 s.36
• /
• pp.131-138
• /
• 1978

A virus named Cymbidium mild mosaic virus(Cy MMV), was mechanically transmitted to Chenopodium amaranticolor from the leaves of Cymbidium with mild mosaic symptoms. The virus was cultured in C. amaranticolor, in which it produced local chlorotic and ring spots, followed by systemic vein clearing with distortion. CyMMV infected 7 out of 35 species of plants. In C. amaranticolor juice infectivity was lost by heating at $90^{\circ}C$ for 10 miuntes, and by aging at$20^{\circ}C$ for 60 days, and by diluting at $10^{-6}$ when bioassayed on C. amaranticolor. CyMMV was not transmitted by Myzus persicae. The virus was purified after clarification of homogenized C. amaranticolor leaf tissues with chloroform, by differential centrifugation followed by sucrose density gradient centrifugation. Electron microscopic examination of purified preparation showed spherical particles of 28nm in diameter. The UV absorption spectrum of purified preparation was typical of u nucleoprotein (max. at 261nm. min. at 243nm), and showed 260/280=1.72 and max/min=1.26. The value of the sedimentation coefficient of the virus was S20.w=126. In gel-diffusion tests, CyMMV antiserum reacted with CarMV, but not with any of four other viruses (BBWV, CRSV, CMV, TBRV) having similar particles and properties in vitro. In ultra-thin sections of CyMMV infected tissues, a large number of virus particles were found in the cytoplasm of mesophyll cells and in xylem vessels.

• Journal of Korean Society of Forest Science
• /
• v.83 no.3
• /
• pp.322-330
• /
• 1994

The Universal Soil Loss Equation (USLE) has been widely used to predict long-term soil loss by incorporating several erosion factors, such as rainfall, soil, topography, and vegetation. This study is aimed to introduce the LISLE within geographic information system(GIS) environment. The Kwangneung Experimental Forest located in Kyongki Province was selected for the study area. Initially, twelve years of hourly rainfall records that were collected from 1982 to 1993 were processed to obtain the rainfall factor(R) value for the LISLE calculation. Soil survey map and topographic map of the study area were digitized and subsequent input values(K, L, S factors) were derived. The cover type and management factor (C) values were obtained from the classification of Landsat Thematic Mapper(CM) satellite imagery. All these input values were geographically registered over a common map coordinate with $25{\times}25m^2$ ground resolution. The USLE was calculated for every grid location by selecting necessary input values from the digital base maps. Once the LISLE was calculated, the resultant soil loss values(A) were represented by both numerical values and map format. Using GIS to run the LISLE, it is possible to pent out the exact locations where soil loss potential is high. In addition, this approach can be a very effective tool to monitor possible soil loss hazard under the situations of forest changes, such as conversion of forest lands to other uses, forest road construction, timber harvesting, and forest damages caused by fire, insect, and diseases.

• Journal of Wetlands Research
• /
• v.6 no.1
• /
• pp.167-178
• /
• 2004

The southern tidal flat of Kanghwa Island is one of the biggest flats on the west coast of Korea. Tide is typically a semidiurnal with maximum range of about 10m. The tidal flat receives large amount of sediments from Han River system. Surface sediments for sedimentary analyses were sampled at 83 stations in the study area in August 2003. The surface sediments consisted of five sedimentary facies. Generally, sandy mud sediments dominated in the southern tidal flat of Kanghwa Island, whereas sand sediments dominated in channel and subtidal zones of the western part of Kanghwa Island. The area of sandy mud sediment extended to eastward tidal flat compared to sedimentary facies in August 1997. Sedimentary facies analysis of three core sediments from the tidal flat to the south of the Kangwha Island revealed three sedimentary facies: trough-cross-bedded sand, laminated silt, and bioturbated silt. Distribution of the facies in the cores suggested that sedimentation rates has been generally high in the margin of main tidal channel, especially in the east of the Donggeum Island. Twelve-and-half-hour anchoring survey was carried out for measurements of hydrodynamic parameters at Yeomha channel near Choji Bridge(K1) and channel near Donggeum Island(K2) in June 2003. Residual flows indicated strong ebb-dominated tidal currents. Depth-integrated net suspended sediment loads for one tidal cycle were seaward movement with 309,217.9kg/m and 128,123.1kg/m at station K1 and K2, respectively. The higher value of net suspended sediment loads at station K1 suggested that lots of suspended sediments from Han River deposited in the eastern part of tidal flat.

• Journal of the Korean Society of Radiology
• /
• v.10 no.8
• /
• pp.565-569
• /
• 2016

Recently, a use of linear accelerator with a multi-leaf collimator(MLC) for radiation therapy is increasing. The importance of quality assurance (QA) for the linear accelerator is emphasized as the side effects of the inaccurate delivery of the radiation beam has been increased according to the high dose irradiation technique. In this study, The $HgI_2$ and $PbI_2$ photoconductor layer samples of $400{\mu}m$ thickness were fabricated using sedimentation method among particle-in-binder technology. From the fabricated samples, the electrical properties(dark current, output current, response properties and linearity) were investigated. From the experimental results, $HgI_2$ has good charge signal generation and linearity. Finally, from the signal response results about various thickness of $HgI_2$ sensor, the signal creation efficiency of $400{\mu}m$ thickness of $HgI_2$ sensor has the highest value and the excellent reproducibility below ${\pm}2.5%$.

• Journal of Korean Society on Water Environment
• /
• v.36 no.5
• /
• pp.431-444
• /
• 2020

The relationship between dam construction and water quality has recently come to be considered an important issue. A dam is a physical factor which causes changes to the river system around it. Considering these points, this study was conducted to obtain basic data by analyzing the relationship between water level fluctuations and water quality parameters in the short-term. In terms of methodology, the new construction of the Yeongju Dam (M5) in 2016 was divided into Stage 1 as the lotic system and Stage 2 as the lentic system, with four years in each period, and the water level fluctuations and water quality were analyzed using official data. As a result of this study, M5, a stagnant area in which organic matter and nutrients accumulate, was found to be an important factor in water quality management. In addition, the water level changed rapidly (0.9±0.2 m → 10.9±7.1 m) as the river environment condition was converted from the lotic system to the lentic system. In addition, water quality parameters such as BOD, COD, TOC, and Chl-a significantly changed in the short-term. Further, since the transport of organic matter and nutrients occurred well in the lotic system, sedimentation was expected to be dominant in the lentic system. Therefore, it was determined that when the river flow is blocked, autochthonous organic matter is an important factor for long-term water quality management in the future. This process can increase the trophic state of the water body. As a result of this study, the TSI_KO value was converted from mesotrophic in Stage 1 to eutrophic in Stage 2. Eventually, short-term changes in the river environment will affect not only changes in water level but also changes in water quality. Thus, a comprehensive and strategic approach is needed for long-term water quality management in the future.

• Parasites, Hosts and Diseases
• /
• v.26 no.4
• /
• pp.275-284
• /
• 1988

This study was performed to observe the present status of intestinal parasitic infections in a remote island, Yondo, located in southern part of Jeonranam-do (Province) , Korea. In February and May, 1988, total 1,011 individual stool samples were collected and examined for intestinal helminths and protozoa using formalin-ether centrifugal sedimentation technique. The results are summarized as follows: 1. Of 1,011 inhabitants examined, 398(39.4%) were positive for intestinal parasites. Helminth positives were 372(36.8%) , and protozoan cyst positives were 56(5.5%) . 2. Ten species of parasites were found. Trichuris trichiura revealed the highest infection rate of 27.5%, Ascaris lumbricoides 17.4%, Taenia sp. 5.8%, Entamoeba coli 3.3%, Ciardia Zamblia 1.5%, Endelimax nasa 0.8%, Hymenolepis nana 0.4%, Hookworm 0.2%, Trichostrongylus orientalis 0,2%, and Entamoeba histolytica 0.2%, respectively. 3. The female group showed higher positive rate(44.0%) than males (34.7%). Also, higher positive rates were observed among adults as compared with the group younger than 10 years old. 4. Average value of E.P.G. was 1,876(range 200∼17,800) in A. lumbricoides positives, and 327 (range 200∼1,600) in T. trichiura positive cases. 5. In helminth egg Positive cases, single in(traction was 63.4%, double infection 34.7%, and triple infection 1.9%, respectively. Among protozoan cyst positives, single infection was 94.6%, and double infection was 5.4%. The present study revealed that the prevalence of intestinal parasites among inhabitants in Yondo island is still so high that special control measures should be performed.

• Journal of Environmental Science International
• /
• v.29 no.11
• /
• pp.1055-1064
• /
• 2020

In this research, heavy metals and T-P removal characteristics of plated wastewater are derived using BPC(Break Point Chlorination) process. AA sedimentation pond outflow(Influence) was evaluated for the removal efficiency of heavy metal(Ni) and T-P at a reaction time of 25 minutes by NaOCl input volume(9, 11, 13 and 15 mL). In the case, the higher the NaOCl input volumes, the higher the ORP values were maintained and the higher the removal efficiency tended to be. On the other hand, T-P was judged to have a low relationship between the ORP value and the removal efficiency. In addition, the efficiency of removal heavy metals and T-P in the plated wastewater by injecting 10 mL, 15 mL, 20 mL and 25 mL NaOCl, increased as the amount of NaOCl injected increased, the amount of NaOH input for pH increased. It was found that suspended solid in effluence also increased. It was also observed that the color of the plating wastewater changed from yellowish green to green to charcoal gray to black as the amount of NaOCl injected increased. Treatment characteristics of the reaction time, the longer the reaction time with the substance to be treated after the input of NaOCl, the more the heavy metal removal efficiency tended to increase. Through XRF analysis of the sludge, the constituents in the sludge such as NaCNO, CNCl, Na₃PO₄, CrO₄, 2Na₂CrO₄ and 2NaNO₃ will be analyzed in detail, and the mechanisms of the reaction between the plated wastewater and the complex compound will be elucidated.