• Economic and Environmental Geology
• /
• v.8 no.3
• /
• pp.125-133
• /
• 1975

The entire South Korea was divided into several main river basins and drilling data through the South Korea were grouped in accordance with the basins. Thickness of each alluvial formation in each basin was averaged to produce the thickness of the whole alluvium. From studying the alluvial stratigraphy of each basin the condition of the alluvial sedimentation was studied and compared between different basins. Thus the characteristics of the alluvial sedimentation in each basin was clarified.

• Journal of Environmental Impact Assessment
• /
• v.27 no.2
• /
• pp.170-180
• /
• 2018

Highland fields are concentrated in the Jaun area of Hongcheong-gun, a large amount of sediments are discharged from the highland fields. The sediment runoff affect the turbidity and water quality of the Soyang Lake, furthermore adversely affect water supply source of the capital region. There are several kinds of BMPs(Best management practices) to decrease the sedimentrunoff from the highland fields. Although construction cost of multistage sedimentation basins is very high, there is no actual survey data for the removal efficiency of suspended sediments and water quality in our country. In this study, stormwaterinflow and outflow of the multistage sedimentation basins were surveyed, and the removal efficiency of nonpoint source pollutants were analyzed. The stormwater survey results fortwo rainfall events show thatremoval efficiencies of SS, BOD and TP loads in the multistage sedimentation basins are 35%~62%, 24%~55%, 35%~58%, respectively. Although the measured efficiencies of the basins were lower than the theoretical efficiency, the proper operation and management can improve the removal rate of the basins. Turbid water problem in the upper parts of the Soyang River can be managed effectively through the additional installation of multistage sedimentation basins.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.4
• /
• pp.481-496
• /
• 1996

The last Sea is a typical bark-arc basin consisting of basins, plateaus, ridges, and seamounts. The Ulleng Basin, located in the southwestern corner of the last Sea, contains thick Neogene sedimentary sequence. Analysis of over 2,500 km of single-channel seismic reflection data suggests that hemipelagic sedimentation prevailed over much of the basin during the late Miocene and pelagic sedimentation became more dominant during the Pliocene. During the Pleistocene terrigeneous sediments transported by turbidity currents and other gravity flows, together with continuous hemipelagic settling, resulted in well-stratified sedimentary layers. Influx of terrigenous sediments during the Pleistocene formed depocenters in the western and southern parts of the basins. In the Ulleung Interplain Gap, where the Ulleung Basin joins the deeper Japan Basin, sediment waves suggesting bottom current activities are seen.

• Environmental Engineering Research
• /
• v.19 no.2
• /
• pp.165-174
• /
• 2014

A model combining multi-dimensional discretized population balance equations with a computational fluid dynamics simulation (CFD-DPBE model) was developed and applied to simulate turbulent flocculation and sedimentation processes in sediment retention basins. Computation fluid dynamics and the discretized population balance equations were solved to generate steady state flow field data and simulate flocculation and sedimentation processes in a sequential manner. Up-to-date numerical algorithms, such as operator splitting and LeVeque flux-corrected upwind schemes, were applied to cope with the computational demands caused by complexity and nonlinearity of the population balance equations and the instability caused by advection-dominated transport. In a modeling and simulation study with a two-dimensional simplified pond system, applicability of the CFD-DPBE model was demonstrated by tracking mass balances and floc size evolutions and by examining particle/floc size and solid concentration distributions. Thus, the CFD-DPBE model may be used as a valuable simulation tool for natural and engineered flocculation and sedimentation systems as well as for flocculant-aided sediment retention ponds.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.2
• /
• pp.191-200
• /
• 2004

DAF process has been designed considering raw water quality characteristics in Korea. Although direct filtration is usually operated, DAF is operated when the freshwater blooms occut or raw water turbidity become high. Pre-sedimentation iS prepared in case when raw water turbidity is very high by rainstorms. A main feature of this plant is that the operation mode can be changed (controlled) based on the characteristics of raw water to optimize the effluent quality and the operation costs. Treatment capacity (surface loading rate) and efficiency of DAF was found to be better than conventional sedimentation process. Moreover, low-density particles (algae and alum flocs) are easily separated while it is difficult to remove in sedimentation. One of the main concerns in adoption of DAF (Dissolved Air-Flotation) process is a high raw water turbidity problem. That is, DAF is not adequate for raw water, which is more turbid than 100NTU. In order to avoid this problem, pre-sedimentation basins are prepared in DAF plant to decrease the turbidity of DAF influent. For simulation of the actual operation, bench and full-scale tests were performed for highly turbid water conditions. Consequently, DAF process coupled with sedimentation is suggested that pre-sedimentation with optimum coagulation prior to DAF would be appropriate.

• Structural Engineering and Mechanics
• /
• v.63 no.4
• /
• pp.567-574
• /
• 2017

Sedimentation tanks are essential structures to filter the suspended sediments in the inlet flow which are constructed at the inlet of the basins forked from rivers and irrigation canals. The larger the constructed tank, the better the sedimentation process is conducted. However, the construction and dredging costs increase. In this regard, improving the performance and sedimentation efficiency seem necessary by alternative methods. One of these effective methods is using baffle plates. Most of the studies carried out in this field are on the use of these baffles in the primary and secondary sedimentation tanks. Hence, this study is carrier out with the objective of increasing the retention efficiency in the irrigation sedimentation tanks using baffles. To reach this goal, the experiments were carried out in a flume with length 8 meters, width 0.3 meters, and height 0.5 meters, considering a sedimentation tanks with a length of 3 meters, in three different inlet concentration, three flow rates and three Froude numbers. The baffles were mounted at the bottom of the tank and the effects of the angle, height and position in the tanks were investigated. The results showed that on average, employing the baffles increased the sedimentation efficiency 5 to 6% and the highest value was obtained for angle 60 with respect to the flow direction. According to the results of this study, the most favorable height and position of these baffles were obtained to be in 40% of the depth of the flow and 50% of the length of the sedimentation tank, respectively. Also, by increasing the number of baffles, the sedimentation efficiency decreased. Regarding the sedimentation regions in this case, more than 80% of the settled sediments were observed in the middle of the tank measured from the inlet.

• Membrane and Water Treatment
• /
• v.8 no.5
• /
• pp.423-435
• /
• 2017

Settling Basins are one of the most important and popular methods for removal of suspended sediments irrigation and drainage networks or power canals taking off from an alluvial river and wastewater treatment plant. Improving the performance and so increasing sediment removal efficiency of settling basins by an alternative method is necessary. In the present work, the effect of baffle and its angle of attack with the flow (${\theta}$) on the sediment removal efficiency is investigated by conducting a series of experiments on a straight canal with 8 m length, 0.3 m width and 0.5 m height and 3 m length of basin equipped with an adjustable glass baffle. A numerical analysis has been carried out using ANSYS Fluent 3D software (a general purpose computational fluid dynamics simulation tool) for three Froude numbers from the experiments. The numerical and experimental results were found to match reasonably well.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.08a
• /
• pp.49.1-49.1
• /
• 2008

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2004.11a
• /
• pp.97-97
• /
• 2004

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.3
• /
• pp.135-148
• /
• 2018

Reservoir sedimentation is a major environmental issue, and various sediment load controls and plans have been proposed to secure clean and safe water resources. The objectives of this study were to estimate soil loss in the upper basins and predict sediment deposition in Ipjang reservoir using hydrologic and hydraulic model. To do so, SWAT (Soil and Water Assessment Tool) and EFDC (Environmental Fluid Dynamics Code) was used to estimate soil loss in two upper basins and to predict spatial distribution and amount of sediment deposition in the Ipjang reservoir, respectively. The hydrologic modeling results showed that annual average soil loss from the upper basins was 500 ton. The hydraulic modeling results demonstrated that sediment particles transported to the reservoir were mostly trapped in the vicinity of the reservoir inlet and then moved toward the bank over time. If long-term water quality monitoring and sediment survey are performed, this study can be used as a tool for predicting the dredging amount, dredging location and proper dredging cycle in the reservoir. The study findings are expected to be used as a basis to establish management solutions for sediment reduction.