• 제목/요약/키워드: sediment transportation

검색결과 84건 처리시간 0.045초

주암댐 호저 퇴적물에서의 수직적 중금속 분산과 $^{210}Pb$를 이용한 퇴적속도산정 (Vertical Distribution of Heavy Metal Concentrations in Sediment Cores and Sedimentation Rate Using $^{210}Pb$ Dating Technique in the Juam Reservoir)

  • 이평구;염승준;연규훈;지세정;김지욱;오창환;김선옥
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제10권1호
    • /
    • pp.43-57
    • /
    • 2005
  • 주암댐에 유입된 호저퇴적물의 입도(2mm-200{\mu}m,\;200-100{\mu}m,\;100-50{\mu}m,\;50-20{\mu}m,\;<20{\mu}m)별 중금속(As, Cd, Cr, Cu, Ni, Pb, Zn)의 이동과 퇴적 후 중금속의 수직적 분산 특성을 규명하기 위하여 12개 지점의 호저퇴적물과 3개 지점의 코아시료를 채취하였으며, 코아시료는 2-5 cm 간격으로 절단하여 깊이별 간극수와 퇴적물의 중금속 함량을 측정하였다. 호저퇴적물의 퇴적속도를 측정하기 위하여 코아시료에 대한 $^{210}Pb$ 동위원소 연구를 수행하였다. 주암댐 호저 퇴적물의 중금속 및 미량원소의 함량은 퇴적위치와 상관없이 거의 일정한 함량을 보이며.,평균 함량은 $As\;14.9\;{\mu}g/g,\;Cd\;0.81\;{\mu}g/g,\;Cu\;30.7\;\;{\mu}g/g,\;Ni\;34.7\;{\mu}g/g,\;Pb\;63.3\;{\mu}g/g,\;Zn\;87.9\;{\mu}g/g$이다. Cu, Pb, Zn, Ni 및 Cd의 함량은 $20\;{\mu}m$ 이하 입도의 퇴적물에서 가장 높은 반면, As는 $2mm-200{\mu}m$ 혹은 $200-100\;{\mu}m$ 입도의 퇴적물에서 가장 높다. 간극수에 용해된 원소 중에서 가장 함량이 높은 것은 Fe와 Mn 이었으며, 코아시료의 상부로부터 심부로 갈수록 함량이 증가하는 수직적 분산특성을 나타낸다. 반면에 용존 Zn과 Cu함량은 코아시료의 최상부에서 가장 높게 나타나며, 이는 산화:환원 전위차에 따른 유기물질 및 산화광물의 용해작용과 관련이 있다. 코아시료의 퇴적물 내 Cu, Ni, Pb 및 Zn 함량은 0-4 cm구간에서 가장 높은 표면집적 현상이 관찰되며, Pb와 Cu 함량이 현저하게 높은 데, 이는 인위적인 오염에 기인하는 것으로 해석된다. $'unsupponed\;^{210}Pb'$을 이용하여 계산된 호저퇴적물의 퇴적 속도는 $\omega=0.91\;cm\;year^{-1}$ 이며, 이를 적용하면 주암댐이 완공된 이후 약 10 cm의 퇴적물이 평균적으로 퇴적된 것으로 추정된다. 이러한 자료는 주암댐 호수 바닥에 퇴적된 퇴적물의 관리방안을 마련하는 데 중요한 정보로 사용될 수 있을 것이다.

흐름 메카니즘에 의한 깔따구들의 분포(I) - 인공수로 실험 - (The Distribution of Chironomids by Flow Mechanisms - Artificial Channel Measurement -)

  • 이상호;이정민;박재현;송미영
    • 한국물환경학회지
    • /
    • 제22권1호
    • /
    • pp.150-158
    • /
    • 2006
  • Over the past few years, many studies have been conducted on the flow, sediment movement, pollution transportation and scour etc. However, very few attempts have been made at the hydraulic studies reflecting upon the ecological function. The objective of this study is to examine the structures of the flow and turbulence in an open circular channel and their relationship to distribution of the organisms and chironomids. Under different flow conditions, the organic matter and some chironomids were injected into the channel. Using the obtained velocity data, the flow mechanisms and the turbulent shear stresses were analyzed. Organic matters and chironomids were distributed on the region that the velocity was slower and the turbulent shear stresses were smaller. Some habitat moved even though chironomids were inhabited. This phenomenon has relationship with the flow mechanism. Some chironomids have distributed around the habitat structure of a hemisphere. The secondary flow has affected the deposition of the organic matters and the distribution of chironomids.

서핑가능 지역의 지속가능한 서핑을 위한 서핑자원 관리 - 강원도 양양군 죽도해변을 중심으로 (Surfing Resources Management for Sustainable Surfing in Surfable Region - Focusing on Jukdo, Yangyang, Gangwon Province)

  • 백승준;박용성
    • 한국해안·해양공학회논문집
    • /
    • 제32권6호
    • /
    • pp.506-515
    • /
    • 2020
  • 서핑은 자연적으로 발생하는 파도를 이용하는 스포츠로 자연환경의 변화에 민감하게 작용한다. 다시 말해서, 서핑을 할 수 있는 파도가 도달하던 해안에서 인근의 해안시설물의 건설이나 해안 침식, 표사이동에 의한 해안선의 변화와 같은 요인이 파도를 서핑에 부적합한 방향으로 변하게 만들 수 있다. 본 연구에서는 서핑에 적합한 파도가 형성되는 데에 영향을 주는 해안환경 특성들을 일컬어 서핑자원(Surfing Resources)이라 하고, 이를 해안공학적 방법론으로 분석하였다. 그리고 Delft3D-WAVE 모듈(SWAN model)을 활용한 강원도 양양군 죽도해변의 서핑자원 분석을 통해, 서핑 파도의 지속가능성을 평가하는 방법에 대해 제시하였다.

퇴적 환경에 따른 루미네선스 신호의 특성 (Characteristics of Luminescence Signals According to the Depositional Environment)

  • 홍성찬;최광희
    • 한국지형학회지
    • /
    • 제28권2호
    • /
    • pp.59-70
    • /
    • 2021
  • This study aims to determine the sunlight exposure according to depositional environment to improve the accuracy of optically simulated luminescence (OSL) dating. Sufficient sunlight exposure during transportation of sediment is a basic assumption of the OSL dating, and if the process does not occur enough, the results may be overestimated compared to the actual depositional age. Therefore, the main purpose of this study is to establish a correction method by determining residual or unbleachable dose after sunlight exposure in the actual deposition process, not in the laboratory measurement. Four samples from two sites were collected according to the depositional environment from rivers and coasts, and various OSL signals, including the size of residual dose, degree of dispersion between grains, and OSL signal sensitivity, were measured. As a result, it was confirmed that sediments formed under temporarily high energy environments, such as floods and surges, had relatively high residual dose or large dispersion of residual dose between particles. In further studies, the OSL signal characteristics of river sediments by flow velocity will be identified and the relationship between energy and OSL signal characteristics will be identified in more detail. Moreover, a method of reconstructing the paleo-environment at the time of deposition for existing sediments will be devised. It is expected to provide important information for the frequency of disaster recurrence and prediction of future climate change.

기계학습 분류모델을 이용한 하천퇴적물의 중금속 오염원 식별 (Identifying sources of heavy metal contamination in stream sediments using machine learning classifiers)

  • 반민정;신상욱;이동훈;김정규;이호식;김영;박정훈;이순화;김선영;강주현
    • 한국습지학회지
    • /
    • 제25권4호
    • /
    • pp.306-314
    • /
    • 2023
  • 하천퇴적물은 유역내 다양한 오염원으로부터 발생하는 중금속, 유기물 등 오염물질의 수용체일 뿐만 아니라 수질 오염 및 수생태 악영향을 유발할 수 있는 2차적 오염원이기에 중요한 관리대상이라고 할 수 있다. 오염된 하천퇴적물의 효과적인 관리를 위해서는 오염원에 대한 식별과 이와 연계된 관리대책의 수립이 우선되어야 한다. 본 연구는 하천퇴적물내 측정된 다양한 이화학적 오염항목 분포 특성에 기반하여 퇴적물의 주요 오염원을 식별하기 위한 방법으로서 기계학습모델의 적용성을 평가하였다. 기계학습 모델의 성능 평가를 위해 전국 4대강 수계내 주요 폐금속광산 및 산업단지 인근에서 수집된 총 356개의 하천퇴적물에 대한 중금속 10개 항목(Cd, Cu, Pb, Ni, As, Zn, Cr, Hg, Li, Al)과 토양항목 3개(모래, 실트, 점토 비율) 수질항목 5개(함수율, 강열감량, 총유기탄소, 총질소, 총인)를 포함한 총 18개 오염항목에 대한 분석자료를 활용하였다. 기계학습 분류 모델로서 선형판별분석(linear discriminant analysis, LDA)과 서포트벡터머신(support vector machine, SVM) 분류기를 사용하여 폐금속광산('광산')과 산업단지('산단') 인근에서의 하천퇴적물 시료의 분류 성능을 평가한 결과, 채취 지점 및 시기별 4가지 경우(비강우시 광산, 강우시 광산, 비강우시 산단, 및 강우시 산단)에 대한 퇴적물 시료의 분류 성능이 우수하였으며, 특히 비선형 모델인 SVM(88.1%)이 선형모델인 LDA(79.5%) 보다 퇴적물을 분류하는데 있어 보다 우수한 성능을 나타냈다. SVM 앙상블 기반 비배타적 다중라벨분류기 모델을 이용하여 각 시료채취 지점 상류 유역 1km 반경 내 지배적인 토지이용 및 오염원을 다중 타겟값으로 다중분류 예측을 수행한 결과, 폐금속광산과 산업단지의 분류는 비교적 높은 정확도로 수행하였으나, 도시와 농업지역 등 다른 비점오염원에 대한 분류정확도는 56~60%범위로 비교적 낮게 나타났다. 이는 다중라벨 분류모델의 복잡성에 비해 데이터셋의 크기가 상대적으로 작아서 발생한 과적합에 기인한 것으로 향후 보다 많은 측정자료가 확보될 경우 기계학습 모델을 적용한 오염원 분류의 정확도를 보다 향상시킬 수 있을 것으로 판단된다.

강우의 공간분포에 따른 침식 및 퇴적의 변동성 분석 (Analysis on the Effect of Spatial Distribution of Rainfall on Soil Erosion and Deposition)

  • 이기하;이건혁;정관수;장창래
    • 한국수자원학회논문집
    • /
    • 제45권7호
    • /
    • pp.657-674
    • /
    • 2012
  • 본 연구에서는 용담댐 상류, 천천 시험유역을 대상으로 분포형 수문모형을 이용하여 강우의 공간분포 특성에 의한 유역에서의 침식 및 퇴적양상을 분석하고, 유출 및 유사량 모의결과에 미치는 영향을 분석하였다. 일반적으로 강우의 공간적 분포를 묘사하기 위해 사용되는 지점 강우 내삽기법(Thiessen Polygon: TP, Inverse Distance Weighting: IDW, Kriging) 및 레이더 강우 합성기법(Gauge-Radar ratio: GR, Conditional Merging: CM)을 이용하여 태풍으로 인한 3개의 집중호우 사상기간동안의 강우장을 생성한 후 각 기법들에 의해 생성된 강우장의 양적, 공간적 특성을 평가하였다. 또한, 각 기법별로 생성된 공간분포형 강우를 분포형 수문모형에 적용하여 강우의 공간분포에 따른 유역에서의 강우-유사-유출분석 및 유역에서의 침식 및 퇴적양상을 비교 분석하였다. 그 결과, 지상 우량계를 이용한 내삽기법의 경우 유사한 우량주상도 및 수문응답을 나타내었으며, 원시 레이더 자료 및 GR기법에 의한 결과는 각각 과소, 과대산정된 반면 CM기법은 레이더 강우의 공간적 특성을 유지하면서 양적으로도 개선된 결과를 보여주었다. 또한 양적으로 유사한 강우장임에도 불구하고, 각 기법에 의한 강우장의 공간적 특성으로 인하여 대상유역내 침식 및 퇴적양상은 매우 상이하게 나타났다.

실내실험에 의한 가동보 기립각도 변화에 대한 토사의 퇴적 과정 분석 (Experimental analysis of the sedimentation processes by variation of standing angle in the improved-pneumatic-movable weir)

  • 이경수;장창래
    • 한국수자원학회논문집
    • /
    • 제51권9호
    • /
    • pp.795-802
    • /
    • 2018
  • 본 연구에서는 실내실험을 통하여 개량형 공압식 가동보를 대상으로 보의 기립각도를 고려한 유사의 퇴적과 델타의 발달 과정을 파악하였다. 가동보 상류에서 유입되는 유사는 배수의 영향으로 유속이 느려지면서 퇴적이 되고 델타가 형성되며 하류로 이동하였다. 각 실험조건에 대하여 시간에 따른 델타의 이동속도는 델타는 시간이 지나면서 현저하게 감소하고, 보에 접근하였다. 무차원 델타의 높이($h_d/h$)가 증가할수록 무차원 델타의 이동속도($S_D/V_0$)는 감소하였다. 따라서 델타의 높이($h_d$)가 증가할수록 수심(h)은 감소하였다. 델타의 유효높이($h_w$)가 크기 때문에 델타의 체적($V_{xD}$)은 증가하지만 배수(backwater)의 영향을 받아 델타의 이동속도($S_D$)와 퇴적량은 감소하였다. 수로 경사가 일정할 때, 보의 높이(W)가 클수록 델타체적($V_{xD}$)이 증가하고, 델타의 전면부 길이비($h_d/{\Delta}S$)는 1에 가깝다. 같은 유량조건인 경우에 가동보의 기립 각도가 가장 클 때, 시간당 델타의 퇴적량($Q_s$)은 가장 작았다. 따라서 보의 높이(W)가 클수록 델타의 발달을 억제할 수 있는 효과가 크다.

캐나다 아퀴스토어 탄성파자료를 통한 이산화탄소 지중저장 연구지역 대수층 특성화 (Aquifer Characterization Using Seismic Data on the Aquistore CCS Project, Canada)

  • 정순홍;김병엽;신영재;이호용;박명호
    • 자원환경지질
    • /
    • 제47권6호
    • /
    • pp.625-633
    • /
    • 2014
  • 캐나다 아퀴스토어 프로젝트는 인근의 화력발전소에서 포집한 이산화탄소를 심부 약 3,500 m에 존재하는 염대수층에 저장하는 포집, 수송, 주입 및 저장의 전 과정을 포함하는 세계 최초의 통합 실증 프로젝트이다. 이산화탄소의 저장소로서의 염대수층은 기존의 한정적으로 분포된 석유가스 저류층과 비교했을 때 전 세계 어디서나 분포하므로 이에 대한 실증 연구는 이산화탄소 지중저장의 저변 확대에 큰 의미가 있다. 염대수층에 이산화탄소를 주입하고 추적하기 위해서는 지하의 물성을 파악하고 특성화해야 한다. 본 연구는 캐나다 아퀴스토어 이산화탄소 지중저장 현장의 탄성파 탐사자료로부터 석유가스 자원 탐사에 이용되는 진폭 변화 분석기술을 응용하여 지중저장 대상지층의 유체 포화 특성을 도출하였다. 시추공 검층자료에서 해석된 이산화탄소 저장층 구간의 상부 및 하부는 Winnipeg층 1,815 ms과 Deadwood 층 1,857 ms로 탄성파 자료와 대비하였다. 대상 구간의 탄성파 기록으로부터 입사각에 따른 진폭 크기변화를 확인한 결과 자료의 상관성은 45 %에서 81 % 범위였다. 종축절편과 진폭구배 속성을 교차출력한 결과는 반비례 관계를 보여 전형적인 함수 퇴적층에 해당하였다. 계산된 속성들에서 대수층의 기저를 공간적으로 도시하였고 이산화탄소 지중저장 구간의 포아송비 변화를 예측하였다.

침투 여과형 비점오염저감시설의 설계 및 평가 (Evaluation and Design of Infiltration and Filtration BMP Facility)

  • 최지연;말라;이소영;강창국;이정용;강희만;김이형
    • 환경영향평가
    • /
    • 제19권5호
    • /
    • pp.475-481
    • /
    • 2010
  • Lots of pollutants typically originating from urban transportation are accumulating on the paved surfaces during dry periods and are washed-off directly to the river during a storm. Also, paved surfaces are contributing to increase in peak flows and volume of stormwater flows. These are the main reasons why the water quality of rivers and lakes remain polluted and still below standards. Currently, several management practices are being applied in developed countries but the design standards are still lacking. This research was conducted to develop a treatment technology that can be useful to address the problems concerning runoff quality and quantity. A lab scale infiltration device consisting of a pretreatment tank and media zone was designed and tested for various flow regimes characterizing the low, average and high intensity rainfall. Based on the experiments, the high intensity flow resulted to increase in outflow event mean concentration (EMC) of pollutants, about twice as much as the average outflow EMC. However, 78 to 88% of the total suspended solids were captured and retained in the pretreatment tank because of sedimentation. The removal of heavy metals such as zinc and lead was greatly affected by the vertical placement of woodchip layer prior to the media zone. It was observed that the high carbon content (almost 50%) in the woodchip provided opportunity for enhancing its uptake of metal by adsorption. The findings implied that the reduction of pollutants can be greatly achieved by means of proper pretreatment to allow for settling of particles with a combination of using high carbon source media like woodchip and a geotextile mat to reduce the flow before filtering into the media zone and finally discharging to the drainage system.

여과형 비점오염 처리장치의 오염물질 제거특성 및 역세척 분석 (The Performance of Pollutant Removal Using Nonpoint Treatment Filtration Device and Analysis of the Filter Backwashing Effect)

  • 이준호;양승호;방기웅
    • 한국물환경학회지
    • /
    • 제31권5호
    • /
    • pp.523-532
    • /
    • 2015
  • Hydrocyclone is widely used in industry, for its simple design, high capacity, low maintenance and low operational cost. The objective of this study is to develop hydrocyclone coagulation and filtration system. The system is made of hydrocyclone ballasted coagulation with polyaluminium chloride silicate (PACS) and upflow filter to treat micro particles in urban storm runoff. Roadside sediment particles (< $200{\mu}m$) was mixed with tap water to make various turbid suspensions to simulate urban storm runoff. The filter cartridge was filled with polyethylene media system and ran 1hr per everyday and total operation time were 8.19hrs and backwashing everyday after end of operation. The operation condition of flowrate was $8.2{\sim}11.9m^3/day$ (mean $10.1m^3/day$) and surface overflow rate (SOR) based on filter surface area was $45.5{\sim}65.9m^3/m^2/day$ (mean $55.7m^3/m^2/day$). The range of PACS dosage concentration was 14.0~31.5 mg/L. As the results of operation, the range of removal efficiency of turbidity, SS were 81.0~95.8% (mean 89.5%) 81.8~99.0% (mean 91.4%), respectively. An increase of filtration basin retention time brought on increased of removal efficiency of turbidity and SS, and increase of SOR brought on decreased of removal efficiency. During the first flush in urban area, storm runoff have an high concentration of SS (200~600 mg/L) and the filtration bed becomes clogged and decreased of removal efficiency. Backwashing begins when the drainage pipe valve at the filtration tank bottom is completely open (backwashing stage 1). Backwashing stage 2 was using air bubbles and water jet washing the media for 5 mins and open the drainage valve. After backwashing stage 1, 2, 61.83~64.04%, 18.53~27.51% of SS loading was discharged from filtration tank, respectively. Discharged SS loading from effluent was 7.12~14.79% and the range of residual SS loading in fliter was 2.26~5.00%. The backwashing effects for turbidity, SS were 89.5%, 91.4%, respectively. The hydrocyclone coagulation and filtration with backwashing system, which came out to solve the problems of the costly exchange filter media, and low efficiency of removing micro particles of filter type nonpoint treatment devices, is considered as an alternative system.