• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.3
• /
• pp.57-69
• /
• 2011

This study examined the relationship between Phragmites australis' growth and sediment properties at mud tidal flat of Donggum-ri, Gilsang-myeon, Gangwha-gun, Incheon city. Field survey was carried out from May, 2010 to October, 2010. Water content, soil texture, electric conductivity and water table depth for sediment, density, height, dry weight and flowering for P. australis were examined at several plots from the starting point (the coastal embankment) to the end point of the two populations. The result was as follows. Firstly, the water table increased along distance from the embankment at one line (N-line) but was similar at the other line (S-line) in a P. asustralis population. Water tables were higher out of than within a P. australis population at two populations. Secondary, in N-line, the height and dry weight of P. australis decreased along the distance from embankment but, in S-line, those were similar in its population. P. australis' growth was dependent on electric conductivity at lower layer (water table level) rather than upper one (the surface). Thirdly, density of P. australis changed during growing season and was similar in a population, except for the end point of patch. In summary, the growth and distribution of P. australis were dependent on salt content of tidal flat's sediment (water table level) and this was affected by fresh water of the inland.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.6
• /
• pp.511-516
• /
• 2004

As a preliminary study on the sediment flux, concentrations of suspended particulate matter and current speeds were measured at three inlets of Gwangyang Bay during one tidal cycle of a spring tide of March 2003. The suspended sediment flux rate $(g/m^{2}/s)$ at the mouth of Seomjin River (St. K1) was observed to be higher throughout surface layer during ebb tide $(14.3\;g/m^{2}/s)$ and throughout near-bottom layer during the flood tide $(23.2\;g/m^{2}/s),$ resulting in a net upstream-ward transport of$0.9{\times}10^{3}kg/m$ during 13 period. At the inlet toward Yeosu Bay (St. K2), a relatively low rate ($(5.0-6.7\;g/m^{2}/s)$ of sediment flux occurred throughout the water column compared to St. K1, with a depth-integrated net transport of $5.6{\times}10^{3}kg/m$ toward the outer reaches of Gwangyang Bay inlet. At St. K3 located at Gwangyang Bay-side of Noryang Strait, the outward flux toward the Jinju Bay was observed to be dominant during the flood tide $(16.2-23.2\;g/m^{2}/s)$, especially through the mid and near bottom layer, compared to the inward flux throughout the whole water column during the ebb tide $(13.1-19.7\;g/m^{2}/s).$ The net transport at St. K3 was calculated to be $4.0{\times}10^{3}kg/m$ toward the outside of Gwangyang Bay. The outward net transport of suspended sediment at all three inlets seems to be consistent with a trend of bottom sediment texture, which suggests a net movement of sediment from a relatively coarse and poorly sorted inner-bay toward a relatively fine and better sorted outer-bay environment.

• Journal of Environmental Science International
• /
• v.11 no.12
• /
• pp.1299-1305
• /
• 2002

Thirty sediment samples of the <63${\mu}{\textrm}{m}$ fraction collected from the southwestern coast of Korea were analysed for their heavy metal (Fe, Mn, Cr, Co, Cu, Ni, Zn and Pb) concentration. The results show that sediment texture plays a controlling role on the total metal concentrations and their spatial distribution. A single lM HCl extraction procedure was used in order to assess the environmental risk of heavy metals in bottom sediments. The non-residual fraction was the most abundant pool for Mn and Pb in most samples, which means that this metals are highly avaliable in these sediments. Cr, Ni, Fe, Co, Zn and Cu were mainly associated with the residual fraction, suggesting that their concentrations are controlled significantly by transport processes with the fine particles as carriers from diffuse pollution source. Concentration enrichment ratios(CER) were calculated from the non-residual contents and their values allowed us to classify the sediments according to their environmental risk.

• Journal of Wetlands Research
• /
• v.10 no.3
• /
• pp.27-35
• /
• 2008

Sediment cores were obtained from Upo and Mokpo in Upo Wetland and core samples were divided by depth into 20 ~ 21 subsamples. The heavy metal concentrations of Fe, Mn, Zn, AS, Cu, Cd, Ni, Pb, and Cr in the sediments of each depth were determined by ICP-MS. The texture of sediemnts from Upo Wetland appeared to be clayey silt with average grain size of $7.52{\sim}11.15{\mu}m$ for physical properties. It was found to have a clear tendency of depth profile with respect to TOC and ignition loss. Organics were stabilized in the range of 0.5 ~ 0.7 % TOC and 8 ~ 9 % ignition loss in 30 years, whereas, the surficial sediments have the highest concentrations of about 3.0 % of TOC and 13 ~ 15 % ignition loss. Those are much higher than the values of the main stream, the Nakdong River, which reflects the deposit of biodegradable organics from plants and other lifes. The vertical distribution of heavy metals in two sediment cores was investigated to elucidate historical trends of heavy metals deposited into Upo wetland. The depth profile concentrations of each heavy metal were compared and discussed with the Concensus-Based Sediment Quality Guidelines for freshwater ecosystems. All the Cd data for the vertical distribution in the sediments were detected above PEC value for Cd, which predict harmful effects on sediment-dwelling organisms expected to occur frequently. The concentrations of Zn, Cu, and Cr in all sediment samples for depth profile were detected below the TEC values, which provided a basis predicting the absence of toxicity by Zn, Cu, and Cr.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.2
• /
• pp.200-214
• /
• 1994

In order to clarify the benthic environmental properties as a part of a study on the macrobenthic community in the Chinhae Bay System, water temperature, salinity and dissolved oxygen (DO) in surface and bottom water layers, mean grain size (${\phi}$) and sediment organic carborn (SOC) in surface sediment were analyzed at twelve stations during the period from June 1987 to May 1990. A high sediment organic carbon and hypoxic condition in bottom water due to the development of summer stratification and fine sediment texture toward the inner bay were important environmental characteristics of Chinhae Bay. Hypoxic conditions began to develop in the inner bay from May, and gradually spread toward the outer bay in summer with a peak in September when half the bay was affected by this oxygen deficiency. Recovery from this hypoxic condition in the bottom layer was observed from the beginning of autumn together with a disappearance of the summer stratification. Principal component analyses were carried out from the following five environmental variables:mean water temperature, salinity, dissolved oxygen in the bottom layer and mean grain size, sediment organic carbon in surface sediment. The twelve stations were classified into four areal groups based on the analyses. The division of the areal groups had high correlations to the sediment organic carbon content.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.6
• /
• pp.865-871
• /
• 2016

This study investigated the quality characteristics of Yanggaeng added with lentil bean sediment. Yanggaeng was prepared by addition of 0, 25, 50, and 75% (w/w) lentil bean sediment to white bean basic formulation. For the proximate composition measurement, lentil bean sediment consisted of 15.63% moisture, 17.31% crude protein, 0.92% crude ash, and 0.31% crude fat. The sediment yield of lentil beans was 54.25%. The moisture content of Yanggaeng significantly increased with increasing lentil bean sediment content. The total soluble solid content ($^{\circ}Brix$) of Yanggaeng significantly decreased with increasing lentil bean sediment content, whereas the pH was not significantly different between the control and experimental groups. The lightness of Yanggaeng significantly decreased with increasing lentil bean sediment content, whereas redness and yellowness significantly increased with increasing lentil bean sediment content. The springiness, gumminess, and chewiness of Yanggaeng decreased with increasing lentil bean sediment content, whereas hardness and cohesiveness was not significantly different between the control and experimental groups. The total phenolic content and 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity significantly increased with increasing lentil bean sediment content. Yanggaeng containing 25% lentil bean sediment had acceptable sensory properties, such as taste, texture, and overall preferences. Thus, our results suggest that Yanggaeng containing 25% lentil bean sediment could improve the sensory properties and antioxidant activities of Yanggaeng.

• Korean Journal of Ecology and Environment
• /
• v.34 no.2 s.94
• /
• pp.106-118
• /
• 2001

The chemistry of porewater and exchangeable nutrients of sediment was determined to define potential influence of sediment nutrients on the water quality and the phytoplankton growth in Taechong Reservoir in March and May of 2000. The sediment-water interface showed almost anoxic state, < 0.5 mg $O_2/l$. Conductivity of the porewater was higher 1.9${\sim}$2.6 fold than that of sediment, and its variation was greater in the shallow water. Eh ranged from -12mV to -148 mV and bulk density from $1.17\;g/cm^3$ to $1.30\;g/cm^3$ and they did not differ among stations. The water content in the sediment ranged from 58% to 72% and organics from 8% to 13%, and they were higher toward the lower part of reservoir. Soil texture was in the order of sand>clay>silt and sandy sediment accounted for 97% of the total sediment. The total bacterial numbers and diatom abundance were high in the downstream of the reservoir. In porewater and exchangeable nutrients of sediment, nitrogen and phosphorus were mostly consist of the particulate form. Inorganic nitrogen was mostly composed of $NH_4$. Nitrogen of porewater was mostly an inorganic form while exchangeable nutrients were composed an organic form. However, phosphorus was composed of dissolved organic fraction in the porewater while inorganic fraction in the exchangeable nutrients. Silicon content of sediment was much exchangeable nutrients with 63%, and it was higher than in the porewater. In summary, the sediments of Taechong Reservoir were mostly composed of organics and assessed to be a eutrophic state.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.5
• /
• pp.626-637
• /
• 2013

We measured the grain size, ignition loss (IL), chemical oxygen demand (COD), acid volatile sulfide (AVS) and trace metals (Al, Fe, Cu, Pb, Zn, Cd, Cr, Mn, Hg, and As) of intertidal surface sediment collected from 11 islands (62 stations) in the southern region of Jeollanam Province. The objective of this research was to evaluate the organic matter and trace metals contaminations of sediments from coastal island tidal flats. Surface sediment texture was characterized as follows: mud, sandy silt, muddy sand, and slightly gravelly sand facies. The finer sediments are mainly dominated in the northern part of each island. The concentrations of IL, COD, AVS and some trace metals (Al, Fe, Zn, Cr, Cu, and Hg) were higher in the northwestern part of Wan Island and the area between Gogeum and Sinji Islands, and were associated with relatively finer sediment, as compared to other locations. The concentrations of Mn, Pb, Cd, and As were higher in the northwestern and southeastern parts of Geoguem and Pyungil Islands, but were not correlated with mean grain size. Based on sediment quality guidelines (SQGs), the concentrations of trace metals were lower than the values of effect range low (ERL), used in United States, and threshold effects level (TEL), used in Korea, with exception of As. Similarly, the intertidal sediments were moderately contaminated with As, based on the the enrichment factor (EF) and the geoaccumulation index ($I_{geo}$). The high concentration of As in intertidal sediments from this study region may be due to the input of naturally or artificially contaminated submarine groundwater, contaminated waste from seaweed aquaculture operations and/or land-based seaweed processing facilities. Further studies are needed to identify the sources of As in this study region, and to determine the effects of As contamination on coastal ecosystem.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.140-143
• /
• 2004

The west coast of the Korean Peninsula is famous for its large tidal range (up to 9 m) and vast tidal flats. With comparison the sedimentary environments of open and close tidal flat using remote sensing, we select Kanghwa tidal flat and Hwang-Do tidal flat in Cheonsu Bay. Prior to surface sediment discrimination using remote sensing, sedimentary environments including intertidal OEM, hydraulic condition, and relationship between grain size and various tidal condition are investigated. Remote sensing has the potential to provide synoptic information of intertidal environments. The objectives of this study are: (i) to generate an intertidal digital elevation model (OEM) using the waterline method of Lansat TM/ETM+, (ii) to investigate the tidal channel distribution using texture analysis, and (iii) to analyze the relationship between surface grain size by using in-situ data and intertidal OEM and tidal channel density by using high-resolution satellite data such as IKONOS and Kompsat EOC. The results demonstrate that satellite remote sensing is an efficient and effective tool for a surface sediment discrimination and long term morphologic change estimation in tidal flats.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.4
• /
• pp.659-663
• /
• 1998

Mook is a traditional Korean food made from the sediment of mungbean, cowpea, buckwheat or acorn. The air-dried sediment of cowpea(6~9%, dry basis) was heated to 80~95$^{\circ}C$ by continuous(method A) or instantaneous(method B) heating method and held at that temperature for 20min and then cooled at 15$^{\circ}C$ for 3hrs. The optimum deformation rate for the measurements of hardness and cohesiveness of cowpea mook by Instron Universal Testing Machine was 55~65% by method A and 60~70% by method B. The hardness of mook made by method A was the highest at heating temperature of 9$0^{\circ}C$, whereas that by method B was linearly decreased as the heating temperature increased at all concentrations. The mook made by method B had higher cohesiveness than that by method A. The ratio of cohesiveness to hardness was also higher in mook made by method B.