• 한국환경과학회지
• /
• 제16권12호
• /
• pp.1319-1324
• /
• 2007

A tank model in conjunction with Kalman filter is developed for prediction of sediment yield from an upland watershed in Northwestern Mississippi. The state vector of the system model represents the parameters of the tank model. The initial values of the state vector were estimated by trial and error. The sediment yield of each tank is computed by multiplying the total sediment yield by the sediment yield coefficient. The sediment concentration of the first tank is computed from its storage and the sediment concentration distribution(SCD); the sediment concentration of the next lower tank is obtained by its storage and the sediment infiltration of the upper tank; and so on. The sediment yield computed by the tank model using Kalman filter was in good agreement with the observed sediment yield and was more accurate than the sediment yield computed by the tank model.

• 한국환경과학회지
• /
• 제18권1호
• /
• pp.1-7
• /
• 2009

In this study a sediment yield is compared by IUSG, IUSG with Kalman filter, tank model and tank model with Kalman filter separately. The IUSG is the distribution of sediment from an instantaneous burst of rainfall producing one unit of runoff. The IUSG, defined as a product of the sediment concentration distribution (SCD) and the instantaneous unit hydrograph (IUH), is known to depend on the characteristics of the effective rainfall. In the IUSG with Kalman filter, the state vector of the watershed sediment yield system is constituted by the IUSG. The initial values of the state vector are assumed as the average of the IUSG values and the initial sediment yield estimated from the average IUSG. A tank model consisting of three tanks was developed for prediction of sediment yield. The sediment yield of each tank was computed by multiplying the total sediment yield by the sediment yield coefficients; the yield was obtained by the product of the runoff of each tank and the sediment concentration in the tank. A tank model with Kalman filter is developed for prediction of sediment yield. The state vector of the system model represents the parameters of the tank model. The initial values of the state vector were estimated by trial and error.

• Ocean and Polar Research
• /
• 제30권4호
• /
• pp.537-543
• /
• 2008

The sediment resuspension and diffusion model is an integral part of a sediment transport and morphologic change model. We examined a vertical one-dimensional sediment resuspension and diffusion model using field data collected at about 10-m depth off the Saemangeun $4^{th}$ dike. The field data include waves, currents and suspended sediment concentration near the bed for about a day in May, 2007. The suspended sediment concentration obtained from the 1D model overestimated the observation about two orders of magnitude with single grain size and multiple grain sizes. The incorporation of the bed armoring effect, which adjusts the amount of suspended sediment with the available bed sediment, improved the agreement between the model and observation within a factor of two.

• 한국물환경학회지
• /
• 제23권6호
• /
• pp.872-880
• /
• 2007

For effective management of sediment-related diffuse pollution, it is of utmost importance to estimate spatial variation of sediment transport processes within a catchment. A mathematical model can play a critical role in estimating sediment transport processes at the catchment scale provided that the model structure is appropriate for representing major sediment transport processes of the catchment of interest. This paper introduces a distributed catchment model River Basin Water Quality Simulator (RBWQS) and presents some results of its application to a small rural catchment in Korea. The model has been calibrated and validated for a wet period using hourly hydrographs and sediment concentrations observed at the catchment outlet. Based on the model simulation results, the spatial variation of sediment transport processes across the catchment and the effects of paddy fields and small reservoirs on hydrology and sediment transport have been analyzed at the catchment scale.

• 생태와환경
• /
• 제44권1호
• /
• pp.66-74
• /
• 2011

This numerical study aims to investigate the effect of cohesive sediment on turbulence structure due to density stratification. The transport model for cohesive sediment incorporated with flocculation model has been selected and calculates the concentration, fluid momentum, and turbulence. From the model results, it is known that suspension of sediment decreases turbulence intensity. It is also found that cohesive sediment has a relatively weak effect on turbulence damping compared to noncohesive sediment. The low settling velocity and more suspension of cohesive sediment are considered to be mechanisms of this behavior. Richardson number determined with results of this study quantitatively shows that cohesive sediment causes less stable density stratification condition and, as a result, the turbulence structure is less damped compared to the case of noncohesive sediment.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2011년도 학술발표회
• /
• pp.17-17
• /
• 2011

As a method of countermeasure to bed degradation and armoring phenomena of bed material in the downstream area of dam reservoirs, sediment augmentation (replenished sediment) has been carried out in many Japanese rivers. In general, bed of the replenished sediment site is composed of rocks, because the site is located in the downstream area of the dams and sediment supply is very small. Bed deformation process has been researched by many researchers. As a method of countermeasure to bed degradation and armoring phenomena of bed material in the downstream area of dam reservoirs, sediment augmentation (replenished sediment) has been carried out in many Japanese rivers. In general, bed of the replenished sediment site is composed of rocks, because the site is located in the downstream area of the dams and sediment supply is very small. Bed deformation process has been researched by many researchers. However, most of them can treat movable bed only and cannot be applied to the bed deformation process of sediment on rocks. If the friction angle between the sediment and the bed surface is assumed to be the same as the friction angle between the sediment and the sediment, sediment transport rate must be smaller without sediment deposition layer on the rocks. As a result, the reproduced bed geometry is affected very well. In this study, non-equilibrium transport process of non-cohesive sediment on rigid bed is introduced into the horizontal two dimensional bed deformation model and the model is applied to the erosion process of replenished sediment on rock in the Nakagawa, Japan. Here, the Japanese largest scale sediment augmentation has been performed in the Nakagawa. The results show that the amounts of the eroded sediment and the remained sediment reproduced by the developed numerical model are $56300m^3$ and $26800m^3$, respectively. On the other hand, the amounts of the eroded sediment and the remained sediment measured in the field after the floods are $56600m^3$ and $26500m^3$, respectively. The difference between the model and field data is very small. Furthermore, the bed geometry of the replenished sediment after the floods reproduced by the developed model has a good agreement with the measured bed geometry after the floods. These results indicate that the developed model is able to simulate the erosion process of replenished sediment on rocks very well. Furthermore, the erosion speed of the replenished sediment during the decreasing process of the water discharge is faster than that during the increasing process of the water discharge. The replenished sediment is eroded well, when the top of the replenished sediment is covered by the water. In general, water surface level is kept to be high during the decreasing process of the discharge during floods, because water surface level at the downstream end is high. Hence, it is considered that the high water surface level during the decreasing process of the water discharge affects on the fast erosion of the replenished sediment.

• 대한토목학회논문집
• /
• 제2권2호
• /
• pp.19-28
• /
• 1982

하구(河口), 항만(港灣) 등에서 응집성(凝集性) 및 비응집성토사(非凝集性土砂)의 이송추정(移送推定)을 위한 이차원토사이송추정모형(二次元土砂移送推定模型)이 개발되었으며 이 모형(模型)은 흐름에 의한 순환모형(循環模型)과 토사이송모형(土砂移送模型)으로 구성된다. 토사이송모형(土砂移送模型)은 이차원확산(二次元擴散) 방정식(方程式)과 연속방정식(連續方程式)으로 이루어진다. 해(解)는 Galerkin 유한요소법(有限尿素法)과 이단계(二段階) Lax-Wendroff 방법(方法)에 의하였다. 이차원수로(二次元水路)의 상이(相異)한 조건하에서 순환(循環)과 토사이송(土砂移送)에 관하여 수치모의(數値模擬) 되었으며 부산항(釜山港)에 적용하여 얻어진 결과중에서 실측치(實測値)와 비교가 가능한 흐름양상(樣相)은 대체로 실측치(實測値)와 근사(近似)하게 나타났다.

• 한국물환경학회지
• /
• 제26권2호
• /
• pp.332-342
• /
• 2010

A model has been developed to investigate in-river sediment and phosphorus dynamics. This advective-dispersive model is coupled with hydrodynamics and sediment transport submodels to simulate suspended sediment, total dissolved phosphorus, total phosphorus, and particulate phosphorus concentrations under unsteady flow conditions. It emphasizes sediment and phosphorus dynamics in unsteady flow conditions, in which the study differs from many previous solute transport studies, conducted in relatively steady flow conditions. The diffusion wave approaximation was employed for unsteady flow simulations. The first-order adsorption and linear adsorption isotherm model was used on the basis of the three-layered riverbed submodel with riverbed sediment exchange and erosion/deposition processes. Various numerical methods were tested to select a method that had minimal numerical dispersion under unsteady flow conditions. The responses of the model to the change of model parameter values were tested as well.

• 한국습지학회지
• /
• 제19권1호
• /
• pp.132-143
• /
• 2017

유사의 침식 이송 퇴적으로 인해 발생할 수 있는 문제를 최소화하기 위해 하천에서의 정기적인 유사량 자료의 획득이 필수이다. 하지만 현재 국내에서의 유사량 측정 계획으로는 유사량 추정에 어려움이 있어 이를 대체하기 위해 경험식이나 수치모형을 활용하고 있다. 따라서 본 논문에서는 유역에서의 유사량 산정과 자료의 연속성 확보를 위해 국내에서 개발된 격자기반 강우-유출-유사 모형인 K-DRUM 모형을 적용하였다. 17개의 중권역에 대한 유량과 유사량을 산정하고 실측자료와 비교를 통해 모형의 적용성을 검토하였다. 정량적인 평가를 위해 NSE, PBIAS, RSR 등을 기준항목으로 사용하였으며, 유량에 대한 모의결과는 강우의 경향을 잘 반영하며 높은 통계값을 나타내었다. 유사량의 경우 유역의 토양침식과정을 물리적으로 잘 반영하였으며, 실측자료를 이용하여 보정을 수행하였을 때 그 유역에서 연속적인 유사량 자료를 산정하는데 적용성이 우수한 것으로 나타났다.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제2권1호
• /
• pp.29-36
• /
• 1998

An instantaneous unit sediment graph (IUSG) model is investigated for prediction of sediment yield from an upland watershed in Northwestern Mississippi. Sediment yields are predicted by convolving source runoff with an IUSG. The IUSG is the distribution of sediment from an instantaneous burst of rainfall producing one unit of runoff. The IUSG, defined as a product of the sediment concentration distribution (SCD) and the instantaneous unit hydrograph (IUH), is known to depend on the characteristics of the effective rainfall. The IUH is derived by the Nash model for each event. The SCD is assumed to be an exponential function for each event and its parameters were correlated with the effective rainfall characteristics. A sediment routing function, based on travel time and sediment particle size, is used to predict the SCD.