• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 춘계공동학술발표회요약집
• /
• pp.421.1-421
• /
• 2002

• Journal of Astronomy and Space Sciences
• /
• 제19권2호
• /
• pp.151-162
• /
• 2002

인공위성에서의 우주방사선 차폐계산을 위한 근사계산 방법으로 sectoring method를 적용하는 방법과 chord-length 분포를 이용하는 방법을 상세 계산 결과와 비교하였다. 저 궤도 위성인 우리별 1호를 대상으로 양성자의 차폐계산을 수행하였다. 이때 방사선환경은 AP-8 model을 이용하여 구한 SAA(South Atlantic Anomaly)지역으로 가정하였다. Sectoring method와 chord-length 분포를 이용하는 방법은 양성자가 물질내에서 직진한다는 기본적인 가정을 사용하므로 3차원 상세계산 결과와 비교하여 어느 정도의 오차를 갖는다. 그러나 우리별 1호를 대상으로 수행된 계산 결과에서 두 계측기 위치에서의 피폭량 예측은 2가지 근사모델이 모두 상세계산 결과와 근사하게 일치하였다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2004년도 한국우주과학회보 제13권2호
• /
• pp.347-350
• /
• 2004

A space radiation analysis has been used to evaluate an ability of electronic equipment boxes or spacecrafts to endure various radiation effects, so it helps design thicknesses of structure and allocate components to meet the radiation requirements. A comparison study of space radiation dose analysis programs SPENVIS Sectoring Tool (SST) and SIGMA II is conducted through some structure cases, simple sphere shell, box and representative satellite configurations. The results and a discussion of comparison will be given. A general comparison will be shown for understanding those programs. The both programs use the same strategy, solid angle sectoring with ray-tracing method to produce an approximate dose at points in representative simple and complex models of spacecraft structures. Also the particle environment data corresponding to mission specification and radiation transport data are used as input data. But there are distinctions between them. The specification of geometry model and its input scheme, the assignment of dose point and the numbers, the prerequisite programs and ways of representing results will be discussed. SST is a web-based interactive program for sectoring analysis of complex geometries. It may be useful for a preliminary dose assessment with user-friendly interfaces and a package approach. SIGMA II is able to obtain from RSICC (Radiation Safety Information Computational Center) as a FOR-TRAN 77 source code. It may be suitable for either parametric preliminary design or detailed final design, e.g. a manned flight or radiation-sensitive component configuration design. It needs some debugs, recompiling and a tedious work to make geometrical quadric surfaces for actual spacecraft configuration, and has poor documentation. It is recommend to vist RSICC homepage and GEANT4/SSAT homepage.

• 전자공학회논문지S
• /
• 제35S권1호
• /
• pp.39-51
• /
• 1998

In this paper, we propose signaling procedures amon network elements for a connection rerouting method which can reduce inter-switch handoff processing delay reduces the delay in the connection re-routing by reserving VPI/VCIs for possible inter-switch handoff calls in advance. Additionally, we mathematically analyze the signaling procedures and then suggest solutions to the relations with cluser size, network topoloty, handoff-request rete and handoff delay. With simulation, the solutions are validated. From numerical examples, we concluded taht handoff delay, one of the handoff QoSs, can be satisfied by adjusting the cluster size and network topology according to the handoff -request rate of service area. With our proposed signaling and analytic methods, we concluded that the connection rerouting method using cluster-sectoring effectively reduces the delay of inter-switch handoff processing than dynamic connection rerouting method. Our solutions are useful in guaranteeing the requested handoff delay (especially, inter-switch handoff delay) when the connection rerouting method is applied to ATM-based wireless/wired integrated network.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1138-1144
• /
• 2008

To study the feasibility of applying wireless communication technology to the control of train for the effective control of train and for the reduction of cost and time to construct the necessary infra structure, we investigate into the application of the existing commercial WCDMA network to CBTC (communication-based train control) to grasp the obstacles and propose the solutions to circumvent them. The obstacles can be categorized into the hand-off problem, the interference problem near the stations, and the problem of radio shadow areas. We propose, as solutions, the cell overlap method and multi-terminal approach for the hand-off problem, the cell sectoring method for the interference problem, and establishment of new base stations along the railroad both to provide the wireless train control and communication service to the customers on the train which was otherwise impossible because of the shadowing effect.

• Nuclear Engineering and Technology
• /
• 제36권1호
• /
• pp.1-11
• /
• 2004

Two approximate methods for a cosmic radiation shielding calculation in low earth orbits were developed and assessed. Those are a sectoring method and a chord-length distribution method. In order to simulate a change in cosmic radiation environments along the satellite mission trajectory, IGRF model and AP(E)-8 model were used. When the approximate methods were applied, the geometrical model of satellite structure was approximated as one-dimensional slabs, and a pre-calculated dose-depth conversion function was introduced to simplify the dose calculation process. Verification was performed with mission data of KITSAT-1 and the calculated results were also compared with detailed 3-dimensional calculation results using Monte Carlo calculation. Dose results from the approximate methods were conservatively higher than Monte Carlo results, but were lower than experimental data in total dose rate. Differences between calculation and experimental data seem to come from the AP-8 model, for which it is reported that fluxes of proton are underestimated. We confirmed that the developed approximate method can be applied to commercial satellite shielding calculations. It is also found that commercial products of semi-conductors can be damaged due to total ionizing dose under LEO radiation environment. An intensive shielding analysis should be taken into account when commercial devices are used.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2005년도 한국우주과학회보 제14권1호
• /
• pp.143-147
• /
• 2005

우주시스템 연구실에서 개발 중인 HAUSAT-2의 우주방사능 환경은 포획된 양자와 전자, 태양양성자이다. 본 논문에서는 우주방사능 환경에 대해 임무기간동안의 총 피폭량을 계산하였고, 총 피폭량에 대해 HAUSAT-2에서 사용하는 부품들의 부품의 우주방사능 허용레벨 분류과정을 통해 사용가능성을 검증하였다. 또한 단일사건 발생확률을 계산하여 단일사건 발생에 대비하는 시스템을 설계에 반영하였다.

• 한국항공우주학회지
• /
• 제34권5호
• /
• pp.30-38
• /
• 2006

기존의 전통적인 회귀분석 기반 교정방법에 비해 높은 교정정밀도를 얻을 수 있는 5-hole pressure probe의 교정방안을 연구하였다. 이 새로운 교정기법은 교정시험으로부터 획득한 데이터와 곡선적합 결과간의 차이를 이용하여 산정한 단일 영역에 대한 오차보간 반응곡면을 사용한다. 끝단의 직경이 4.0 mm인 5-hole probe를 자체 제작하고, 레이놀즈수$4.11{\times}10^6$/m와 흐름각 ${\pm}48$에서 교정시험을 수행하였다. 최소자승 회귀분석모델과 단일영역 오차보간 모델을 적용하여 자료처리를 수행하고 이들 두 교정방안에 대한 비교평가와 분석을 수행하였으며, 아울러 교정 정밀도에 대한 평가도 수행하였다.

• Journal of Astronomy and Space Sciences
• /
• 제22권4호
• /
• pp.537-558
• /
• 2005

본 논문에서는 HAUSAT-2위성이 운용될 케도의 우주 방사능 환경 및 총 피폭효과(Total Ionizing Dose), 단일사건 효과(Single Event Effects) 등에 대해 분석하였다. 총 피폭효과에 영향을 미치는 우주 방사능은 포획된 양성자, 전자, 태양 양성자 및 우주선이다. 총 피폭효과는 선량 심도선 분석을 통해 해석을 수행하였으며, DMBP(Design Margin Breakpoint) 방법과 3-D 구분구적법을 이용하여 HAVSAT-2의 부품의 총 피폭량에 대한 내성을 검증하였다. 단일사건 효과에 대하여 위성체 외부와 내부 방사능 환경으로 양성자와 중이온에 대하여 선형에너지 전달량(LET) 스펙트럼을 분석하였으며, HAUSAT-2의 전자소자로 사용예정인 MPC860T2B 마이크로프로세서와 메모리 K6X8008T2B에 대한 SEU(Single Event Upset) 및 SEL(Single Event Latch-up) 발생률을 추정하였다. 분석 결과 SEU는 운용 중에 수차례 발생하며 SEL 발생은 임무기간동안 일어나지 않을 것으로 추정되었다. HAUSAT-2는 소프트웨어 해밍코드 EDAC을 이용하여 SEU 발생에 대처할 수 있는 시스템 레벨의 설계를 반영하였다. 이 연구에서 수행된 방사능 해석은 ESA의 SPENVIS소프트웨어를 이용하였다.