• Journal of Welding and Joining
• /
• 제33권2호
• /
• pp.56-61
• /
• 2015

IRW(Inverter Resistance Welding) process and DSW(Delta-spot welding) process for dissimilar materials of DP590 and Al5052 were performed to evaluate the welding quality and mechanical properties. IRW experiment was carried out with changing the welding current. The other welding parameters such as pressure force, weld time, squeezing time and holding time were fixed. On the anther hand, DSW experiment was performed using the process tape at welding current of 11.5kA. The other conditions were same as IRW conditions. The various testes such as shear tensile strength, nugget diameters, EDS, SEM and cross-sectional observation for weld zone was performed. As a result, IMC(Inter Metallic Compound) thickness at 11.5kA was thinner than those of 9.5kA and 10.5kA conditions. In addition, thined IMC layer was observed when high electric current apply to the materials(DP590 and Al5052) in a short time throught dissimilar resistance spot welding controling welding conditions. The relationship between the thickeness of IMC and current intensity was after discussed.

• 한국지반공학회논문집
• /
• 제17권6호
• /
• pp.245-255
• /
• 2001

기존 개탁식터널은 굴착경사와 관계없이 터널상부에는 되메움지반의 자중이 그리고, 터널벽체에는 정지토압이 작용하는 것으로 가정하여 설계되고 있다. 그러나 개착식터널에 실제 작용하는 토압은 개착규모에 따라 다르며 이에 따라 터널라이닝의 구조적거동 또한 다르게 나타난다. 본 연구에서는 수치해석적방법을 사용하여 굴착경사가 터널라이닝에 미치는 영향을 다음과 같이 조사하였다. 첫째로, 지반범용수치해석프로그램인 FLAC2D를 사용하여 개착공법으로 시공된 기존 터널의 변형거동을 모사할 수 있는 수치해석방법을 활용하여 현장의 계측결과와 비교하므로써 수치해석방법의 타당성을 검증하였고, 둘째로, 동일한 수치해석기법을 적용하여 굴착경사가 $30^{\circ}\;, 456{\circ},\; 60^{\circ},\; 75^{\circ}%인 개착식터널에 작용하는 토압 및 변위와 터널라이닝에 발생하는 단면력을 조사하였다. 수치해석에 사용된 개착식터널은 2차로 도로터널이며, 터널라이닝과 되메움지반 사이의 마찰력을 고려하기 위하여 접합면 요소를 사용하였다. 수치 해석결과, 되메움지반과 터널라이닝 및 굴착사면 사이의 마찰력에 의한 되메움지반 내부의 아칭현상으로 인하여 굴착 경사가 클수록 터널벽체에 상대적으로 작은 토압이 작용하였으며, 이에 따라 터널라이닝의 변형, 모멘트, 전단력이 증가하였음을 알 수 있었다.

• 콘크리트학회논문집
• /
• 제17권1호
• /
• pp.59-68
• /
• 2005

이 논문은 본 연구의 후반부로, 전편의 논문에서 개념적으로 유도하고 정식화한 새로운 트러스모델의 적용성 검증을 다룬것이다. 이 모델에는 처음으로 소개되는 아치계수-$\alpha$가 포함되어 있기 때문에 이 계수의 특성에 대해 고찰하였다. 계수-$\alpha$의 값은 a/d, $\rho$와 $\rho_v$에 따라 변하며, 주철근비가 커질수록 그리고 스터럽 비가 작아질수록 그 값은 증가하는 특성을 갖고 있다. 이렇게 정식화된 트러스모델을 단면법으로 변환하여 주철근과 복부철근의 응력 및 전단강도를 산정하는 식을 유도하였으며, 이 식을 기존 문헌에 발표된 실험자료에 적용하여 그 정확성을 검증하여 본 결과, 예측값은 실험값과 매우 근사하게 일치하는 것으로 나타났다.

• 한국산업정보학회논문지
• /
• 제18권4호
• /
• pp.61-72
• /
• 2013

수출증가가 경제성장을 초래한다는 수출주도성장가설에 관한 실증분석은 주로 개발도상국을 대상으로 하여 시계열 또는 횡단면 자료를 이용하여 지난 1970년대 초부터 최근까지 주요한 관심사가 되어 왔다. 이와 같은 수출주도성장가설에 관한 실증분석은 한국을 포함하여 주로 개발도상국가에 해당되는 아시아 국가들을 분석 대상으로 이루어져 왔다. 본 논문은 여러 국가들의 횡단면 분석보다는 한국의 제조산업에 초점을 맞추어 공적분검정과 오차수정모형을 추정하여 산업의 수출증가와 산업의 성장과의 관계를 조명함으로서 수출주도성장 가설을 검정하였다. 생산과 수출에서 비중이 큰 석유화학, 1차 금속 그리고 조립금속 운송기계를 포함하여 8개의 제조산업 중 6개의 제조산업이 양방향의 인과관계성을 보이고 있기 때문에 한국 제조산업에서는 전반적으로 실질수출액과 실질생산액에 사이에서 양방향의 인과성 관계가 존재한다고 결론을 내릴 수 있다.

• Wind and Structures
• /
• 제30권5호
• /
• pp.525-532
• /
• 2020

This work numerically investigates the effects of Reynolds number Re_D (= 100 - 150), cross-sectional aspect ratio AR = ( 0.25 -1.0), and attack angle α (= 0° - 90°) on the forces, Strouhal number, and wake of an elliptical cylinder, where Re_D is based on the freestream velocity and cylinder cross-section height normal to the freestream flow, AR is the ratio of the minor axis to the major axis of the elliptical cylinder, and α is the angle between the cylinder major axis and the incoming flow. At Re_D = 100, two distinct wake structures are identified, namely 'Steady wake' (pattern I) and 'Karman wake followed by a steady wake (pattern II)' when AR and α are varied in the ranges specified. When Re_D is increased to 150, an additional wake pattern, 'Karman wake followed by secondary wake (pattern III)' materializes. Pattern I is characterized by two steady bubbles forming behind the cylinder. Pattern II features Karman vortex street immediately behind the cylinder, with the vortex street transmuting to two steady shear layers downstream. Inflection angle α_i = 32°, 37.5° and 45° are identified for AR = 0.25, 0.5 and 0.75, respectively, where the wake asymmetry is the greatest. The α_i effectively distinguishes the dependence on α and AR of force and vortex shedding frequency at either Re_D. In Pattern III, the Karman street forming behind the cylinder is modified to a secondary vortex street. At a given AR and α, Re_D = 150 renders higher fluctuating lift and Strouhal number than Re_D = 100.

• Advances in nano research
• /
• 제5권3호
• /
• pp.215-230
• /
• 2017

The development of hybrid systems comprising nanoparticles and polymers is an opening pathway for engineering nanocomposites exhibiting outstanding mechanical, optical, electrical, and magnetic properties. Among inorganic counterpart, iron oxide nanoparticles (IONP) exhibit high magnetization, controllable surface chemistry, spintronic properties, and biological compatibility. These characteristics enable them as a platform for biomedical applications and building blocks for bottom-up approaches, such as the layer-by-layer (LbL). In this regard, the present study is addressed to investigate IONP synthesised through co-precipitation route (average diameter around 7 nm), with either positive or negative surface charges, LbL assembled with sodium sulfonated polystyrene (PSS) or polyaniline (PANI). The surface and internal morphologies, and electrochemical properties of these nanocomposites were probed with atomic force microscopy, UV-vis and Raman spectroscopy, scanning electron microscopy, cross-sectional transmission electron microscopy, and electrochemical measurements. The nanocomposites display a globular morphology with IONP densely packed while surface dressed by polyelectrolytes. The investigation of the effect of thermal annealing (300 up to $600^{\circ}C$) on the oxidation process of IONP assembled with PSS was performed using Raman spectroscopy. Our findings showed that PSS protects IONP from oxidation/phase transformation to hematite up to $400^{\circ}C$. The electrochemical performance of nanocomposite comprising IONP and PANI were investigated in $0.5mol{\times}L^{-1}$ $Na_2SO_4$ electrolyte solution by cyclic voltammetry and chronopotentiometry. Our findings indicate this structure as promising candidate for potential application as electrodes for supercapacitors.

• 한국재료학회지
• /
• 제30권4호
• /
• pp.169-175
• /
• 2020

Silicon nitride thin films are deposited by RF (13.57 MHz) magnetron sputtering process using a Si (99.999 %) target and with different ratios of Ar/N₂ sputtering gas mixture. Corning G type glass is used as substrate. The vacuum atmosphere, RF source power, deposit time and temperature of substrate of the sputtering process are maintained consistently at 2 ~ 3 × 10^-3 torr, 30 sccm, 100 watt, 20 min. and room temperature, respectively. Cross sectional views and surface morphology of the deposited thin films are observed by field emission scanning electron microscope, atomic force microscope and X-ray photoelectron spectroscopy. The hardness values are determined by nano-indentation measurement. The thickness of the deposited films is approximately within the range of 88 nm ~ 200 nm. As the amount of N₂ gas in the Ar:N₂ gas mixture increases, the thickness of the films decreases. AFM observation reveals that film deposited at high Ar:N₂ gas ratio and large amount of N₂ gas has a very irregular surface morphology, even though it has a low RMS value. The hardness value of the deposited films made with ratio of Ar:N₂=9:1 display the highest value. The XPS spectrum indicates that the deposited film is assigned to non-stoichiometric silicon nitride and the transmittance of the glass with deposited SiO₂-Si_xN_y thin film is satisfactory at 97 %.

• 한국지진공학회논문집
• /
• 제14권2호
• /
• pp.37-47
• /
• 2010

RC교량이 내진성능을 확보하기 위해서는 교각의 연성도가 목표연성도에 도달하기 전에 발생하는 전단파괴가 방지되어야 한다. 이를 위해서는 신뢰성 있는 전단강도 평가식이 요구된다. 횡하중을 받는 RC기둥의 전단강도는 변위연성도의 증가에 따라 감소 하는 특성을 나타낸다. 다수의 연구자에 의해 전단강도 식이 제안되어 있으나 변위연성도가 작은 구역에서의 초기전단강도와 연성도 증가에 따른 전단강도의 감소율에서 많은 차이를 보이고 있다. 본 연구에서는 저자들이 제안한 초기전단강도를 기본으로 하여 다른 연구자에 의해서 수행된 많은 기둥실험 결과를 분석하여 변위연성도를 고려한 새로운 전단강도 평가식을 제안하였다, 제안된 평가식은 다른 평가식과의 비교를 통해 정확도가 크게 개선된 것을 확인하였다.

• 한국직업건강간호학회지
• /
• 제27권1호
• /
• pp.67-75
• /
• 2018

Purpose: The purpose of this study was to identify the influence of nurses' emotional intelligence and communication within the organization on teamwork in Armed Forces hospitals. Methods: This study employed a cross-sectional design with a convenience sample of 195 nurses from five Armed Forces hospitals in Korea. Data were collected through a self-administered questionnaire from August 7 to 23, 2017 and analyzed using descriptive statistics, t-test, ANOVA, Pearson's correlation coefficient, and multiple regression. The SPSS/WIN 21.0 program was used for all analyses. Results: The degree of teamwork was $5.03{\pm}0.73$, with scores ranging from 1 to 7. Emotional intelligence and communication within the organization were positively correlated with teamwork. Specifically, communication within the organization (${\beta}=.60$, p<.001), the intensive care unit (${\beta}=.21$, p=.001), and the medical general ward (${\beta}=.17$, p=.010) were identified as factors influencing teamwork. This model explained 51% of the variance in teamwork, and it was statistically significant (F=35.09, p<.001). Conclusion: These results imply the need to develop an approach including communication within the organization to improve teamwork among nurses in Armed Forces hospitals.

• 대한간호학회지
• /
• 제23권4호
• /
• pp.617-630
• /
• 1993

Factors related to health promotion activities and quality of life in Korean women with arthritis have not been clearly identified. Predictors of health promotion might be identified that will enhance the well - being of this group. Accordingly, the findings of the study will contribute additional information about the relationship between health promotion and quality of life and will add to the research on quality of life of individuals with a leading cause of disability--arthritis. The purpose of the study was to examine the relationship of selected background factors (years of illness, perceived severity of illness, uncertainty in illness), perceived self- efficacy, and health promoting behaviors to the quality of life of Korean women with arthritis. A cross - sectional descriptive design was used in this study to investigate relationships among the variables of interest. The sample was composed of 96 women who had arhtrits and visited large university hospital in Seoul for regular check up or pre-scription of medication. The purpose of a descriptive correlational design was to determine the absence or presence of relationships among variables that were measurable (Polit & Hungler, 1981, p.147). The design of this study was appropriate because it yielded answers to the research questions and hypotheses regarding the relationships among the model variables. the Questionnaire contained demographic information, translated Mishel Uncertainty in illness Scale-Community form (MUIS-C) (Mishel, 1987), translated and modified Disease Course Graphic Scale(DCGS) which was developed by Braden (1990), translated Sherer. et al.’s General Self-Efficacy Scale (1982), The Health -Promoting Lifestyle Profile (HPLP), developed by Walker, Sechrist, and Fender (1987) and traslated to Korean by Ha, and quality of life was measured by Face Scale (Andrew, 1976). Several steps of verification for the translation process were carefully conducted. Data analysis included descriptive correlational statistics and multiple regression techniques. Health promotion was the only contributor to pre-dict quality of life. Results showed that enabling cognitive perceptual factor (self-efficacy) mediates the disruptive force (uncertainty in ill-ness) on achieving a health promoting self- help behavior. The findings of this study also indicated that illness - related variable of severity of illness was mediated by health promotion, which buffered it's impact on quality of life.