• Asian-Australasian Journal of Animal Sciences
• /
• 제23권5호
• /
• pp.665-671
• /
• 2010

Muscle fiber characteristics and their relationship to water-holding capacity of longissimus dorsi (ld) muscle were studied in Brahman (BRA) and Charolais (CHA) crossbred bulls fattened under practical farm conditions. Thirty-four BRA and 34 CHA bulls were randomly selected and slaughtered at 500, 550 and 600 kg live weight. Parameters of water-holding capacity such as drip, ageing, thawing, cooking and grilling loss were determined. Muscle fiber characteristics were conducted for muscle fiber type percentage and cross-sectional areas of slow- and fast-twitch fiber types, and correlation coefficients to water-holding capacity parameters were calculated. Results showed that CHA meat had a better water-holding capacity (less ageing, thawing and grilling loss) when compared with BRA, whereas slaughter weights had no significant effects on these parameters. Furthermore, there were no significant differences between genotypes and slaughter weights in muscle fiber type percentage and cross-sectional areas of ld muscle. Slow- and fast-twitch fiber types of all experimental groups averaged 24.4 and 75.6%, respectively. Cross-sectional areas of fast-twitch fibers had almost twice the size of slow-twitch fibers (6,721 and 3,713 ${\mu}m^2$, respectively). The correlation between muscle fiber area and water-holding capacity indicated that muscles with larger fiber areas had a lower drip and ageing loss but a higher cooking and grilling loss.

• 콘크리트학회논문집
• /
• 제12권4호
• /
• pp.121-130
• /
• 2000

Current engineering practice in determining sectional dimensions of prestressed concrete (PSC) girders for bridges is primarily based on the code-specified allowable concrete stresses at different loading stages. It is customary that tendons and sectional dimensions are calibrated and tendon forces are applied at once at the initial stage to keep the subsequent stresses occurring at different loading stages within the allowable stresses. This traditional tensioning method, however, usually results in a too conservative sectional depth in view of ultimate capacity of a girder. A new design method which can realize the reduction of sectional depth of PSC girders is theoretically suggested in this study. Tendons are tensioned twice at different loading stages: the initial stage and the stage after fresh slab concrete is cast. It can be shown that according to this technique, sectional depth can be significantly reduced and larger span can be realized compared to traditional ones. Parametric studies are performed with due considerations given to its practical applications.

• 한국공간구조학회논문집
• /
• 제24권3호
• /
• pp.53-60
• /
• 2024

In this study, the performance evaluation of steel dampers was conducted based on existing research results. The test variables are cross-sectional shape and lateral deformation prevention details. As a result of performance tests according to cross-sectional shape, the circular cross-section was evaluated to be superior than the rectangular cross-section in terms of envelope, stiffness reduction, and energy dissipation capacity. In addition, it was evaluated that the rectangular cross-section where lateral deformation occurs can be restrained by lateral deformation prevention details, thereby improving strength and deformation capacity.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권5호
• /
• pp.89-96
• /
• 2023

본 연구에서는 강봉댐퍼의 변위의존성 평가, 강도 및 에너지소산능력을 평가하였다. 실험 변수는 단면형상 및 형상비이며, 총 6개의 실험체를 제작하였다. 실험 결과, 설계기준에서 제시한 변위 의존성 조건을 모든 실험체가 만족하는 것으로 평가되었다. 그리고 단면형상에 따른 강도 영향은 미비하였다. 결과적으로, 형상비 13.7의 강도 및 에너지소산능력이 우수한 것으로 평가되었다.

• Steel and Composite Structures
• /
• 제35권3호
• /
• pp.371-384
• /
• 2020

The steel-concrete double composite girder in the negative flexural region combines an additional concrete slab to the steel bottom flange to prevent the local steel buckling, however, the additional concrete slab may lower down the neutral axis of the composite section, which is a sensitive factor to the tensile stress restraint on the concrete deck. This is actually of great importance to the structural rationality and durability, but has not been investigated in detail yet. In this case, a series of 5.5 m-long composite girder specimens were tested by negative bending, among which the bottom slab configuration and the longitudinal reinforcement ratio in the concrete deck were the parameters. Furthermore, an analytical study concerning about the influence of bottom concrete slab thickness on the cracking and sectional bending-carrying capacity were carried out. The test results showed that the additional concrete at the bottom improved the composite sectional bending stiffness and bending-carrying capacity, whereas its effect on the concrete crack distribution was not obvious. According to the analytical study, the additional concrete slab at the bottom with an equivalent thickness to the concrete deck slab may provide the best contributions to the improvements of crack initiation bending moment and the sectional bending-carrying capacity. This can be applied for the design practice.

• Steel and Composite Structures
• /
• 제50권4호
• /
• pp.419-428
• /
• 2024

Prefabricated partially-encased composite (PEC) structural component is widely used in construction industry due to its superior structural performance and easy assembly characteristic. However, the solid web in traditional PEC components tends to split concrete into two halves, thus potentially reduces structural integrity and requires double concrete pouring. To overcome the above disadvantages, a new PEC beam with open-web π-shaped steel is proposed in this paper. Four open-web PEC beams with varying sectional height, flange thickness and web void rate were constructed and tested under flexural loads. During experimental tests, all beams exhibited typical flexural failure modes with strong moment capacities and excellent ductility. Owing to the unique construction form of web opening, steel-concrete bonding properties were enhanced and very small relative steel-concrete slips were observed. Experimental results also showed that the flexural capacity of such PEC beams increased with the increase of the sectional height and flange thickness, while was not affected by the web void rate. At last, a flexural capacity formula of the open-web PEC beam was proposed based on the whole section plastic rule. The formula results agreed well with experimental results.

• Steel and Composite Structures
• /
• 제7권2호
• /
• pp.135-160
• /
• 2007

Recently, CFT column has been well-studied and reported on, because a CFT column has certain superior structural properties as well as good productivity, execution efficiency, and improved rigidity over existing columns. However, CFT column still has problems clearing the capacity evaluation between its steel tube member and high-strength concrete materials. Also, research on concrete has examined numerical values for high-strength concrete filled steel square tube columns (HCFT) to explain transformation performance (M-${\phi}$) when a short-column receives equal flexure-moment from axial stress. Moment-curvature formulas are proposed for HCFT columns based on analytic assumption described in this paper. This study investigated structural properties (capacity, curvature), through a series of experiments for HCFT with key parameters, such as strength of concrete mixed design (58.8 MPa), width-thickness ratio (D/t), buckling length to sectional width ratio (Lk/D) and concrete types (Zeolite, Fly-ash, Silica-fume) under eccentric loads. A comparative analysis executed for the AISC-LRFD, AIJ and Takanori Sato, etc. Design formulas to estimate the axial load (N)-moment (M)-curvature (${\phi}$) are proposed for HCFT columns based on tests results described in this paper.

• Steel and Composite Structures
• /
• 제17권5호
• /
• pp.667-686
• /
• 2014

Tapered concrete filled double skin steel tubular (CFDST) columns have been used in China for structures such as electricity transmission towers. In practice, the bearing capacity related to the connection details on the top of the column is not fully understood. In this paper, the experimental behaviour of tapered CFDST stub columns subjected to axial partial compression is reported, sixteen specimens with top endplate and ten specimens without top endplate were tested. The test parameters included: (1) tapered angle, (2) top endplate thickness, and (3) partial compression area ratio. Test results show that the tapered CFDST stub columns under axial partial compression behaved in a ductile manner. The axial partial compressive behaviour and the failure modes of the tapered CFDST stub columns were significantly influenced by the parameters investigated. Finally, a simple formula for predicting the cross-sectional capacity of the tapered CFDST sections under axial partial compression is proposed.

• Steel and Composite Structures
• /
• 제19권6호
• /
• pp.1599-1610
• /
• 2015

Cold Formed Steel members are widely used in today's construction industry. However the structural behavior of light gauge high strength cold formed steel sections characterized by various buckling modes are not yet fully understood. Because of their simple forming and easy connections, the commonly used cold formed sections for beams are C and Z. However both these sections suffer from certain buckling modes. To achieve much improved structural performance of cold formed sections for beams both in terms of strength and stiffness, it is important to either delay or completely eliminate their various modes of buckling. This paper presents various innovative sectional profiles and stiffening arrangements for cold formed steel beams which would successfully contribute in delaying or eliminating various modes of premature buckling, thus considerably improving the load carrying capacity as well as stiffness characteristics of such innovative cold formed sections compared to conventional cold formed steel sections commonly used for beams.

• 한국강구조학회 논문집
• /
• 제15권3호
• /
• pp.251-259
• /
• 2003

본 논문은 매립형 SRC기둥의 축력과 변형능력과의 관계를 찾아내기 위하여 해석적인 연구를 수행하였다. 해석 모델은 캔틸레버기둥으로 한정하였으며 SRC 기둥의 비탄성 거동에 영향을 미치는 변수들인 철골비, 매립철골형상과 전단스팬과 춤과의 비에 대하여 검토하였다. 일정회전각하에 축력과 반복수평력을 받는 SRC기둥의 안정적 거동을 보장하기 위한 최대한계축력이 있다는 것을 해석결과들은 보여 주고 있다. 반복 횡하중을 받는 기둥이 저항할 수 있는 최대축력은 소요회전각을 보장하는 안정한계축력으로서 정의된다. 해석결과에 따르면 안정한 계축력비는 강재의 강도가 증가함에 따라 콘크리트의 강도가 감소함에 따라 증가하는 것으로 나타났다. 또한 I형 단면이 매립형 철골로 사용될때 철골 단면적이 증가함에 따라 안정한계 축력비는 증가하며, 십자형 단면이 사용되는 경우에는 단면적에 의한 영향이 거의 없었다.