• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.6
• /
• pp.987-994
• /
• 2020

In this paper, we studied the effect of kernel size of CNN layer on performance in acoustic noise attenuators. This system uses a deep learning algorithm using a neural network adaptive prediction filter instead of using the existing adaptive filter. Speech is estimated from a single input speech signal containing noise using a 100-neuron, 16-filter CNN filter and an error back propagation algorithm. This is to use the quasi-periodic property in the voiced sound section of the voice signal. In this study, a simulation program using Tensorflow and Keras libraries was written and a simulation was performed to verify the performance of the noise attenuator for the kernel size. As a result of the simulation, when the kernel size is about 16, the MSE and MAE values are the smallest, and when the size is smaller or larger than 16, the MSE and MAE values increase. It can be seen that in the case of an speech signal, the features can be best captured when the kernel size is about 16.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.12
• /
• pp.1826-1834
• /
• 2021

In this paper, we check the possibility of continuous tracking when photographing unknown space objects in a short period of time in an optical observation system on the ground. Simulated observation data were generated for target limited to low-orbit areas. The performance index of the prediction error was set in consideration of the property of targets. Kalman Filter was applied to predict the next location of the target. A constant velocity/acceleration dynamic model was applied to the two axes of the azimuth/elevation of the unknown space object respectively. As a result of performing the Monte Carlo simulation, the maximum error ratio of the maximum nonlinear section was less than 2%, which could be determined to ensure continuous tracking. The CA model had little change in the prediction error value for each case, making it more suitable for tracking unknown space objects. This analysis could provide a foundation for determining the orbit of unknown space objects using optical observation.

• Conservation Science in Museum
• /
• v.29
• /
• pp.111-132
• /
• 2023

Terahertz radiation cannot pass through metal and therefore reflect and return most signals. Utilizing this property, this study analyzed information on paintings to verify the usage of metal materials on paintings and the scope of their application. First, the study tested specimens of metal-based pigments and synthetic pearl pigments with metallic colors and textures in order to compare basic characteristics of terahertz images, such as signal severance caused by metallic substances, traits reflected in cross-section images, and high degree of reflection. Subsequently, based on the collected information, the study diagnosed various types of paintings including Korean traditional paintings and oil paintings using the terahertz imaging technique to confirm the usage of metal-based pigments in the inner layers of paintings and their scope of application. The terahertz imaging technique could has the potential to provide scientific evidence for previously-undiscovered information and art-historical records about various types of paintings that used metalbased pigments, thereby rendering significant utility for the conservation and authentication of paintings.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.923-928
• /
• 2022

Wildfire disasters in the United States impact lives and livelihoods by destroying private homes, businesses, community facilities, and infrastructure. Disaster victims suffer from damaged houses, inadequate shelters, inoperable civil infrastructure, and homelessness coupled with long-term recovery and reconstruction processes. Cities and their neighboring communities require an enormous commitment for a full recovery for as long as disaster recovery processes last. State, county, and municipal governments inherently have the responsibility to establish and provide governance and public services for the benefit and well being of community members. Municipal governments' comprehensive and emergency response plans are the artifacts of planning efforts that guide accomplishing those duties. Typically these plans include preparation and response to natural disasters, including wildfires. The standard wildfire planning includes and outlines (1) a wildfire hazard assessment, (2) response approaches to prevent human injury and minimize damage to physical property, and (3) near- and long-term recovery and reconstruction efforts. There is often a high level of detail in the assessment section, but the level of detail and specificity significantly lessons to general approaches in the long-term recovery subsection. This paper aims to document the extent of wildfire preparedness at the county level in general, focusing on the long-term recovery subsections of municipal plans. Based on the identified challenges, the researchers provide recommendations for better longer-term recovery and reconstruction opportunities: 1) building permit requirements, 2) exploration of the use of modular construction, 3) address through relief from legislative requirements, and 4) early, simple, funding, and the aid application process.

• Structural Engineering and Mechanics
• /
• v.89 no.1
• /
• pp.1-11
• /
• 2024

This article introduces a novel analytical model for examining the impact of porosity on shear correction factors (SCFs) in functionally graded porous beams (FGPB). The study employs uneven and logarithmic-uneven modified porosity-dependent power-law functions, which are distributed throughout the thickness of the FGP beams. Additionally, a modified exponential-power law function is used to estimate the effective mechanical properties of functionally graded porous beams. The correction factor plays a crucial role in this analysis as it appears as a coefficient in the expression for the transverse shear stress resultant. It compensatesfor the assumption that the shear strain is uniform across the depth of the cross-section. By applying the energy equivalence principle, a general expression for static SCFs in FGPBs is derived. The resulting expression aligns with the findings obtained from Reissner's analysis, particularly when transitioning from the two-dimensional case (plate) to the one-dimensional case (beam). The article presents a convenient algebraic form of the solution and provides new case studies to demonstrate the practicality of the proposed formulation. Numerical results are also presented to illustrate the influence of porosity distribution on SCFs for different types of FGPBs. Furthermore, the article validates the numerical consistency of the mechanical property changesin FG beams without porosity and the SCF by comparing them with available results.

• Steel and Composite Structures
• /
• v.50 no.4
• /
• pp.383-401
• /
• 2024

The research comprehensively studies the axial compression performance of T-shaped concrete-filled thin-walled steel tubular (CTST) long columns after fire exposure. Initially, a series of tests investigate the effects of heating time, load eccentricity, and stiffeners on the column's performance. Furthermore, Finite Element (FE) analysis is employed to establish temperature and mechanical field models for the T-shaped CTST long column with stiffeners after fire exposure, using carefully determined key parameters such as thermal parameters, constitutive relations, and contact models. In addition, a parametric analysis based on the numerical models is conducted to explore the effects of heating time, section diameter, material strength, and steel ratio on the axial compressive bearing capacity, bending bearing capacity under normal temperature, as well as residual bearing capacity after fire exposure. The results reveal that the maximum lateral deformation occurs near the middle of the span, with bending increasing as heating time and eccentricity rise. Despite a decrease in axial compressive load and bending capacity after fire exposure, the columns still exhibit desirable bearing capacity and deformability. Moreover, the obtained FE results align closely with experimental findings, validating the reliability of the developed numerical models. Additionally, this study proposes a simplified design method to calculate these mechanical property parameters, satisfying the ISO-834 standard. The relative errors between the proposed simplified formulas and FE models remain within 10%, indicating their capability to provide a theoretical reference for practical engineering applications.

• The Journal of the Petrological Society of Korea
• /
• v.20 no.1
• /
• pp.23-37
• /
• 2011

The scaling properties on the length distribution of microcrack populations from Tertiary crystalline tuff are investigated. From the distribution charts showing length range with 15 directional angles and five groups(I~V), a systematic variation appears in the mean length with microcrack orientation. The distribution charts are distinguished by the bilaterally symmetrical pattern to nearly N-S direction. The whole domain of the length-cumulative frequency diagram for microcrack populations can be divided into three sections in terms of phases of the distribution of related curves. Especially, the linear middle section of each diagram of five groups represents a power-law distribution. The frequency ratio of linear middle sections of five groups ranges from 46.6% to 67.8%. Meanwhile, the slope of linear middle section of each group shows the order: group V($N60{\sim}90^{\circ}E$, -2.02) > group IV($N20{\sim}60^{\circ}E$, -1.55) > group I($N60{\sim}90^{\circ}W$, -1.48), group II($N10{\sim}60^{\circ}W$, -1.48) > group III($N10^{\circ}W{\sim}N20^{\circ}E$, -1.06). Five sub-populations(five groups) that closely follow the power-law length distribution show a wide range in exponents( -1.06 - -2.02). These differences in exponent among live groups emphasizes the importance of orientation effect. In addition, breaks in slope in the lower parts of the related curves represent the abrupt development of longer lengths, which is reflected in the decrease in the power-law exponent. Especially, such a distribution pattern can be seen from the diagram with $N10{\sim}20^{\circ}E,\;N10{\sim}20^{\circ}W$ and $N60{\sim}70^{\circ}W$ directional angles. These three directional angles correspond with main directions of faults developed around the study area. The distribution chart showing the individual characteristics of the length-cumulative frequency diagrams for 15 directional angles were made. By arraying above diagrams according to the categories of three groups(A, B and C), the differences in length-frequency distributions among these groups can be easily derived. The distribution chart illustrates the importance of analysing microcrack sets separately. From the related chart, the occurrence frequency of shorter microcracks shows the order: group A > group B > group C. These three types of distribution patterns could reveal important information on the processes occurred during microcrack growth.

• Geophysics and Geophysical Exploration
• /
• v.15 no.1
• /
• pp.39-46
• /
• 2012

Recently, stratigraphic reservoirs are getting more attention than structural reservoirs which have mostly developed. However, recognizing stratigraphic thin gas reservoirs in a stacked section is usually difficult because of tuning effects. Moreover, if the reflections from the brine-saturated region of a thin layer have the same polarity with those from the gas-saturated region, we could not easily identify the gas reservoir with conventional data processing technique. In this study, we introduced a way to delineate the gas-saturated region in a thin layer reservoir using a spectral decomposition method. First of all, amplitude spectrum with the variation of the frequency and the incident angle was investigated for the medium which represents property of Class 3, Class 1 or Class 4 AVO response. The results show that the maximum difference in the amplitude spectra between brine and gas-saturated thin layers occurs around the peak frequency independent of the incident angle and the type of AVO responses. In addition, the amplitude spectra of the gas-saturated zone are greater than those of brine-saturated one in Class 3 and Class 4 at the peak frequency while those of phenomenon occur oppositely in Class 1. Based on the results, we applied spectral decomposition method to the stacked section in order to distinguish the gas-saturated zone from the brine-saturated zone in a thin layer reservoir. To verify our new method, we constructed a thin-layer velocity model which contains both gas and brine-saturated zones which have the same reflection polarities. As a result, in the spectral decomposed sections near the peak frequency obtained by Wigner-Ville Distribution (WVD), we could identify the difference between reflections from gas- and brinesaturated region in the thin layer reservoir, which was hardly distinguishable in the stacked section.

• The Korean Journal of Archival Studies
• /
• no.28
• /
• pp.3-33
• /
• 2011

The Office of Crown Properties was established to manage the property of royal properties as an institution belonging to the Department of the Royal Household in April, 1895. However, as the Great Han Empire established and various policies enforcing the power of the emperor became introduced, the Office of Crown Properties came to be expanded to a large financial agency that would be in charge of various financial sources such as Public Land and Maritime Tax. As the Office of Crown Properties came to manage various income sources, it classified the documents dealing with various government agencies in the Capital and other countryside regions by the unit of Section. The Office of Crown Properties classified the documents by Section and filed them according to Sending/Receiving subject. Sometimes, it filed one kind of document only but sometimes many different kinds of documents were filed together. The types of the document can show the characteristics of the document and the hierarchy of the related agencies through the document name. The fact that they filed the documents with different grades in one file shows that the hierarchy of the agency they dealt with was not the primary standard of the filing and that they did not file the documents by its type. The Office of Crown Properties did not file the related documents in the same file, either. We can say the documents are related if they were corresponded with other agencies while they dealt with a specific item. However, they did not file the related documents in the same file but distinguished sending documents from receiving documents. The reason why they filed different kind documents in the same file and separated the related documents in different file was they took 'whether they were sent or received' as the primary filing standard. They separated the sending documents from the receiving documents first and then filed them according to time regardless of the region or institution. The Office of Crown Properties primarily classified the documents by Section, classified the documents with the standard of whether they were receiving documents or sending documents and then filed them in a file according to the time. It means that the Office of Crown Properties came to create the Official Document Classification and filing system.

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.72-81
• /
• 2014

Intergovernmental Panel on Climate Change(IPCC) suggested the three methodology, Tier 1/2/3, considering with the accuracy and difficulty of greenhouse gas emission statistics according to the report determined as the international criterion. In Korea, the existing inventory building was made by the Top-down approach applying with the emission factors for transportation in the entire energy consumption, the emission factors were investigated under the domestic traffic situation which did not reflect by the continuing increase of vehicle and the change of road section. From the suggestion of IPCC, which it is estimated that the emission estimation of $CO_2$ in greenhouse gas emission could be calculated more accurate by the carbon content according to the fuel, the establishment of measures to respond to climate change from the latest greenhouse gas emissions statistics will be able to improve the accuracy of national statistics using monthly or seasonally the analysis of carbon content about the transportation fuels.