• 비파괴검사학회지
• /
• 제23권6호
• /
• pp.616-621
• /
• 2003

There are various Non-Destructive Evaluation (NDE) techniques used for measurement of residual stresses in material, such as magnetic methods, X-ray diffraction, Ultrasonic velocity measurement etc. The capabilities, applications and limitations of these techniques for evaluation of cold work/plastic deformation were studied and compared. Mild steel plates were subjected to different degree of cold deformation and were analyzed by Magneto-mechanical Acoustic Emission (MAE), Barkhausen Noise (BN) and magnetic properties (hysteresis loop parameters analysis). Further, these specimens were analyzed by X-ray diffraction and ultrasonic velocity measurements. The microhardness measurement and microstructure studies of these cold worked plates were also carried out. The results of all these studies and comparison of different techniques are discussed in this paper.

• International Journal of Railway
• /
• 제8권1호
• /
• pp.1-4
• /
• 2015

An accurate measurement of the train-track interaction forces is important for track performance evaluation. In the field calibration test as a wheel load measurement process, the calibration system creates a different boundary condition in comparison with that in the train wheel passage. This study aims to evaluate a reliability of the field calibration test in the process of wheel load measurement. Finite element models were developed to compare the deformed shapes, bending moment and shear force profiles on the rail section. The analysis results revealed that the deformed shapes and their associated bending moment profiles on the rail are significantly different in two numerical simulations of the calibration test and the train wheel load passage. However, the shear stress profile on the rail section of the strain gauge installation in the field was almost identical, which may imply that the current calibration test is sufficiently reliable.

• 한국음향학회지
• /
• 제19권6호
• /
• pp.10-16
• /
• 2000

휴대용 방광 용적 측정시스템을 위한 새로운 추정 알고리듬을 제안하였다. 먼저 주어진 화상 데이터로부터 방광벽과 소변의 경계 끝점을 추출하고, 이로부터 축의 길이를 계산한 후 필터링하여 단면을 얻는다. 방광의 모양의 불규칙성을 고려하여 종단면과 횡단면 두 개의 데이터로부터 단면을 얻은 후 종단면으로 면적을 구하고 이를 횡단면에 적용하여 부피를 계산한다. 반대의 과정을 거쳐 또 하나의 부피 추정치를 얻고 이를 평균하여 실제 부피를 추정하였다. 제안된 알고리듬과 기존의 추정방법을 비교한 결과 제안된 방법에서 좋은 결과를 얻었다.

• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.531-537
• /
• 2014

Through-silicon vias (TSVs) are fine, deep holes fabricated for connecting vertically stacked wafers during three-dimensional packaging of semiconductors. Measurement of the TSV geometry is very important because TSVs that are not manufactured as designed can cause many problems, and measuring the critical dimension (CD) of TSVs becomes more and more important, along with depth measurement. Applying white-light scanning interferometry to TSV measurement, especially the bottom CD measurement, is difficult due to the attenuation of light around the edge of the bottom of the hole when using a low numerical aperture. In this paper we propose and demonstrate four bottom CD measurement methods for TSVs: the cross section method, profile analysis method, tomographic image analysis method, and the two-dimensional Gaussian fitting method. To verify and demonstrate these methods, a practical TSV sample with a high aspect ratio of 11.2 is prepared and tested. The results from the proposed measurement methods using white-light scanning interferometry are compared to results from scanning electron microscope (SEM) measurements. The accuracy is highest for the cross section method, with an error of 3.5%, while a relative repeatability of 3.2% is achieved by the two-dimensional Gaussian fitting method.

• 한국방사선학회논문지
• /
• 제10권5호
• /
• pp.337-341
• /
• 2016

중성자에너지 영역 0.003 eV에서 10 eV에 대해 천연 Sm의 Sm(n,${\gamma}$) 반응에 대한 중성자 포획단면적을 측정하였다. 교토대학교 원자로실험소의 46-MeV 전자선형가속기에서 발생되는 전자의 광핵반응에 의한 중성자를 사용하였고 TOF 방법으로 측정하였다. 사용한 검출기는 12개의 BGO($Bi_4Ge_3O_{12}$) 섬광체로 구성되었고 이 검출장치로 Sm(n,${\gamma}$) 반응으로부터 나오는 즉발감마선을 측정하였다. 검출장치는 중성자 생성 위치로부터 $12.7{\pm}0.02m$ 위치에 설치되었으며 $^{10}B(n,{\alpha}{\gamma})^7Li$ 반응을 이용해 Sm 시료에 입사되는 중성자 선속을 구하였다. 또한 중성자 선속의 변화를 확인하기 위해 $BF_3$ 검출기로 모니터링 하였다. Sm(n,${\gamma}$) 반응단면적 측정결과는 BROND 2.2에 의한 평가결과와 J. C. Chou 및 V. N. Kononov 의 측정값과 비교하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.399-401
• /
• 2009

The purpose of this study is looking for deviation of change in HRV caused of posture. Total 20 adults were measured for 40 minutes(10 minutes rest section and 30 minutes analysis section) when volunteers were sitting and lying down. Other factors which can change in HRV were controlled during measurement. The analysis section were divided by total 6 stages(each by 5 minutes), and compared and analyzed between sitting and lying down groups. It was also compared and analyzed stages in each group. In the result, there was difference at stage 5($20{\sim}25$ minutes interval), but no difference in the total data. The results of each stage in the group, lying down had difference. Therefore, sitting is more stable measurement for HRV study when subjects was waking over 15 minutes.

• Applied Science and Convergence Technology
• /
• 제23권3호
• /
• pp.103-112
• /
• 2014

The Korea Research Institute of Standards and Science (KRISS) has three major vacuum systems: an ultrasonic interferometer manometer (UIM; Section II, Figs. 1 and 2) for a low vacuum, a static expansion system (SES; Section III, Figs. 3 and 4) for a medium vacuum, and an orifice-type dynamic expansion system (DES, Section IV, Figs. 5 and 6) for high and ultra-high vacuum systems. For each system, explicit measurement model equations with multiple variables are given. According to ISO standards, all of these system variable errors were used to calculate the expanded uncertainty (U). For each system, the expanded uncertainties (k = 1, confidence level = 95%) and relative expanded uncertainty (expanded uncertainty/generated pressure) levels are summarized in Table 4. Within the uncertainty limits, our bilateral and key comparisons [CCM.P-K4 (10 Pa to 1 kPa)] are extensive and in good agreement with those of other nations (Fig. 8 and Table 5).

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2505-2510
• /
• 2009

Semiconductor processes need measurement to confirm where there are problems in quality after progresses manufacturing process. This paper suggests equipment and automatic measure sampling method that control monitoring ratio according to change point occurrence availability of process that is not measure method by the existent simple ratio rate. This paper defines measure section as ailment section, metastable section and stability section by change point standard and create statistical model of each section and developed suitable measure rate model by section. As a result, we have accomplished maximum throughput and minimum sampling number that needs to maintain constant level of quality. Proposed method minimizes load of measure process by brings production quality sophistication and decrease of process badness and lowers measure rate in stable section making perception about problem occurrence quick heightening measure rate at change point occurrence.

• 패션비즈니스
• /
• 제10권5호
• /
• pp.105-121
• /
• 2006

Body measurement was first made with the subjects of 193 males in their 20s residing in the Ningbo area, Zhejiang Province in China. In this first report, lower body shapes were classified and discriminated by using anthropometric measurement indices and lower body analysis. The following sums up the research: 1. Compared with the average values of Korean males in their 20s, the Chinese subjects were characterized with thinner waist, more flat hip, and smaller midthigh. 2. The subjects of Chinese males in their 20s showed three types of lower bodies: H-Round Type (25.91%)-thick waist-abdomen, round cross-section waist-abdomen, and small waist-hip difference. A-Trapezoid Type (34.72%)-small width of omphalion waist-abdomen, average cross-section waist-abdomen, and large waist-hip difference. A-Balance Type (39.38%)-average width of omphalion waist-abdomen, flat cross-section waist-abdomen, and large waist-hip difference. 3. Seven useful variables for the categorization of the subjects' lower body types were chosen through stepwise discriminant analysis, and the hit ratio of discrimination was 96.89%.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.633-638
• /
• 2000

Ultrasonic applications for the enhancement of turbulence flow by using the PIV measurement were carried out according to the angle of the ultrasonic oscillator, materials of the reflector and each section when ultrasonic is reflected several times. Angles of the ultrasonic oscillator such as $30^{\circ},\;45^{\circ},\;60^{\circ},\;90^{\circ},\;120^{\circ},\;135^{\circ}$ and $150^{\circ}$ were selected, and turbulent intensities were compared at Reynolds No. 2,000 and 4,000. Materials of the reflector such as wood, acryl, iron and glass were selected, and time mean velocity vector and turbulent intensity were compared at Reynolds No. 4,000. The zone which was observed was selected from first section to fourth section when ultrasonic was reflected several times. Every data such as time mean velocity vector and time mean turbulent intensity which was obtained by PIV measurement was examined, compared and discussed at Reynolds No. 2,000 and 4,000 to know the degree of turbulence enhancement in each case.