• Title/Summary/Keyword: secondary fluid

Search Result 449, Processing Time 0.028 seconds

The Effects of Inclined Foil Shape on Flow Characteristics in Air Foil Thrust Bearing Using CFD (에어 포일 스러스트 베어링의 탑포일 경사면 형상이 유동특성에 미치는 영향에 대한 수치해석 연구)

  • Baek, GeonWoong;Joo, Won-Gu;Mun, Hyeong Wook;Hwang, Sunghyen;Jeong, Sung-Yun;Park, Jung-Koo
    • Tribology and Lubricants
    • /
    • v.37 no.4
    • /
    • pp.117-124
    • /
    • 2021
  • In this study, we perform a 3D CFD conjugate analysis according to the shape of the foil ramp of the air foil thrust bearing, analyze the flow characteristics inside the bearing, and compare the results corresponding to the two shapes. Air has a lower viscosity than lubricating oil. Therefore, the thrust runner of the bearing must rotate at high speed to support the load. The gap between thrust runner and foil is significantly smaller than that of the oil bearing. Hence, it is crucial to analyze the complex flow characteristics inside the bearing to predict the complex flow inside the bearing and performance of the bearing. In addition, flow characteristics may appear differently depending on the ramp shape of the bearing foil, which may affect bearing performance. In this study, we numerically analyze the main flow path of air flowing into the bearing and the secondary flow path used for cooling the bearing using the commercial CFD software ANSYS CFX and compare the flow characteristics for straight and curved foil ramp shapes. Notably, there is a difference in the speed of the flowing air according to the shape of the ramp, which affects the bearing performance.

Effect on Flow Distortion of S-Duct by Boundary Layer Suction (경계층 흡입이 S-Duct의 유동 왜곡에 미치는 영향성 연구)

  • Baeg, Seungyong;Lee, Jihyeong;Cho, Jinsoo
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.47 no.1
    • /
    • pp.17-25
    • /
    • 2019
  • An intake of Aircraft becomes S-shaped geometry due to spatial limitation or procuring survivability. But curvature of the S-shaped geometry makes secondary flow or flow separation which is the cause of non-uniform pressure distribution. In this study, boundary layer suction is applied to RAE M 2129 S-Duct by attaching sub duct. Design variable is suction location and angle. A mass flow rate drawn out by suction at the sub duct outlet is constant over every model. A grid dependency test was conducted to verify validity of computation. The comparison among the CFD (Computation Fluid Dynamics), ARA experimental result, and ARA computation result of non-dimensional pressure distribution on the Port side and Starboard Side confirmed the validity of CFD. In this study, Distortion Coefficient was used for evaluating aerodynamic performance of S-Duct. The analysis, which was about flow separation, vortex, mass flow rate distribution, and pressure distribution were also investigated. Maximum 26.14% reduction in Distortion Coefficient was verified.

Patient outcomes and prognostic factors associated with colonic perforation surgery: a retrospective study

  • Lee, Do-bin;Shin, Seonhui;Yang, Chun-Seok
    • Journal of Yeungnam Medical Science
    • /
    • v.39 no.2
    • /
    • pp.133-140
    • /
    • 2022
  • Background: Despite advances in surgery and intensive perioperative care, fecal peritonitis secondary to colonic perforation is associated with high rates of morbidity and mortality. This study was performed to review the outcomes of patients who underwent colonic perforation surgery and to evaluate the prognostic factors associated with mortality. Methods: A retrospective analysis was performed on 224 consecutive patients who underwent emergency colonic perforation surgery between January 2008 and May 2019. We divided the patients into survivor and non-survivor groups and compared their surgical outcomes. Results: The most common cause of colon perforation was malignancy in 54 patients (24.1%), followed by iatrogenic perforation in 41 (18.3%), stercoral perforation in 39 (17.4%), and diverticulitis in 37 (16.5%). The sigmoid colon (n=124, 55.4%) was the most common location of perforation, followed by the ascending colon, rectum, and cecum. Forty-five patients (20.1%) died within 1 month after surgery. Comparing the 179 survivors with the 45 non-survivors, the patient characteristics associated with mortality were advanced age, low systolic blood pressure, tachycardia, organ failure, high C-reactive protein, high creatinine, prolonged prothrombin time, and high lactate level. The presence of free or feculent fluid, diffuse peritonitis, and right-sided perforation were associated with mortality. In multivariate analysis, advanced age, organ failure, right-sided perforation, and diffuse peritonitis independently predicted mortality within 1 month after surgery. Conclusion: Age and organ failure were prognostic factors for mortality associated with colon perforation. Furthermore, right-sided perforation and diffuse peritonitis demonstrated a significant association with patient mortality.

Evaluation of Internal Blast Overpressures in Test Rooms of Elcetric Vehicles Battery with Pressure Relief Vents (압력배출구를 설치한 전동화 차량 배터리 시험실의 내부 폭압 평가)

  • Pang, Seungki;Shin, Jinwon;Jeong, Hyunjin
    • Journal of the Korean Society for Geothermal and Hydrothermal Energy
    • /
    • v.18 no.3
    • /
    • pp.7-18
    • /
    • 2022
  • Secondary batteries used in electric vehicles have a potential risk of ignition and explosion. Various safety measures are being taken to prevent these risks. A numerical study was performed using a computational fluid dynamics code on the cases where pressure relief vents that can reduce the blast overpressures of batteries were installed in the through-compression test room, short-circuit drop test room, combustion test room, and immersion test room in facilities rleated to battery used in electric vehicles. This study was conducted using the weight of TNT equivalent to the energy release from the battery, where the the thermal runaway energy was set to 324,000 kJ for the capacity of the lithium-ion battery was 90 kWh and the state of charge (SOC) of the battery of 100%. The explosion energy of TNT (△HTNT) generally has a range of 4,437 to 4,765 kJ/kg, and a value of 4,500 kJ/kg was thus used in this study. The dimensionless explosion efficiency coefficient was defined as 15% assuming the most unfavorable condition, and the TNT equivalent mass was calculated to be 11 kg. The internal explosion generated in a test room shows the very complex propagation behavior of blast waves. The shock wave generated after the explosion creates reflected shock waves on all inner surfaces. If the internally reflected shock waves are not effectively released to the outside, the overpressures inside are increased or maintained due to the continuous reflection and superposition from the inside for a long time. Blast simulations for internal explosion targeting four test rooms with pressure relief vents installed were herein conducted. It was found that that the maximum blast overpressure of 34.69 bar occurred on the rear wall of the immersion test room, and the smallest blast overpressure was calculated to be 3.58 bar on the side wall of the short-circuit drop test room.

Biomarkers associated with periodontitis and peri-implantitis: a systematic review

  • Kalsi, Amardip Singh;Moreno, Federico;Petridis, Haralampos
    • Journal of Periodontal and Implant Science
    • /
    • v.51 no.1
    • /
    • pp.3-17
    • /
    • 2021
  • Purpose: The pathology of peri-implantitis is still not fully understood and there have been recent challenges to the consensus on its aetiology and pathology, especially in comparison with periodontitis. The assessment of biomarkers allows a comparison of the pathology of these diseases. The aim of this systematic review was to answer the research question: "Is there a difference in the biomarkers associated with peri-implantitis compared with periodontitis in adult humans?" Methods: Electronic databases were searched and screened, and a manual search was also undertaken. The inclusion criteria were adults with peri-implantitis who had been compared to adults with periodontitis with the outcome of biomarkers assessed via biopsies or crevicular fluid samples in primary or secondary care settings, as recorded in case-control, case series and retrospective, prospective and cross-sectional observational studies. Two reviewers independently screened titles and abstracts and assessed full text articles for eligibility and inclusion. Both reviewers independently extracted data and assessed risk of bias. Differences in biomarker levels were the primary outcome and a narrative review was undertaken due to the heterogeneity of studies. Results: In total, 2,374 articles were identified in the search, of which 111 full-text articles were assessed for eligibility and 13 were included in the qualitative synthesis. Five of the 13 included studies were deemed to be at high risk of bias, with the others having moderate risk. All studies were cross-sectional and performed at university hospitals. Nine of the 13 included studies found significant differences in the levels of biomarkers or their ratios between periimplantitis and periodontitis. Four of the studies found no significant differences. Conclusions: Within the limitations of the included studies, it appears that there may be a difference in biomarker levels and ratios between peri-implantitis and periodontitis, suggesting that these disease processes are somewhat distinct.

A three-region movable-boundary helical coil once-through steam generator model for dynamic simulation and controller design

  • Shifa Wu;Zehua Li;Pengfei Wang;G.H. Su;Jiashuang Wan
    • Nuclear Engineering and Technology
    • /
    • v.55 no.2
    • /
    • pp.460-474
    • /
    • 2023
  • A simple but accurate mathematical model is crucial for dynamic simulations and controller design of helical coil once-through steam generator (OTSG). This paper presents a three-region movable boundary dynamic model of the helical coil OTSG. Based on the secondary side fluid conditions, the OTSG is divided into subcooled region (two control volumes), two-phase region (two control volumes) and superheated region (three control volumes) with movable boiling boundaries between each region. The nonlinear dynamic model is derived based on mass, energy and momentum conservation equations. And the linear model is obtained by using the transfer function and state space transformation, which is a 37-order model of five input and three output. Validations are made under full-power steady-state condition and four transient conditions. Results show good agreements among the nonlinear model, linear model and the RELAP5 model, with acceptable errors. This model can be applied to dynamic simulations and controller design of helical coil OTSG with constant primary-side flow rate.

Antigen analysis of Toxoplasma gondii Iysate and excretory-secretory materials by enzyme-linked immunoelectrotransfer blot (EITB) (효소면역 전기영동이적법에 의한 톡소포자충 용해물 및 분비 항원의 분석)

  • 안명희;손혁진
    • Parasites, Hosts and Diseases
    • /
    • v.32 no.4
    • /
    • pp.249-258
    • /
    • 1994
  • Recently, the importance of toxoplasmosis is raised as a complication in immunosuppressed or AIDS patients. Our study focused on the identification of a variety of Toxoplasma antigens by immunoblotting. Rabbits and BALB/c mice were immunized with Toxoplosmo Iysate (RH strain) , frozen tachyzoites (RH strain) or cysts (Beverly and Fukaya strain) . Blood were collected from ear vein, heart or orbital plexus for detecting the serum antibody levels. For excretory-secretory (E.S) antigens, T gondii (RH) tachyzoite were cultured in CHL (Chinese hamster lung) cells with MEM containing of 5% FCS. After 72hrs, culture supernatant was collected. BALB/c mice were inoculated with RH tachyzoite intraperitoneally and peritoneal fluids were extracted three days later. E.S antigens were detected in culture supernatant and infected mouse peritoneal fluid by EITB. Serum IgG levels in rabbit were 1 :512 of 10 days after primary immunization, 1 : 2,048 of 10 days after secondary immunization, 1: 1,024 of 20 days after secondary immunization by IFAT, respectively. Serum IgG levels of immunized mice were 1:128 after 7 weeks. Tachyzoite antigens of the RH strain were detected 25 protein bands ranging 10 kDa-220 kDa of molecular weights with Coomassie blue stain. Toxoplcsma major antigens corresponding to n of 24 kDa, 27 kDa,30 kDa, 35 kDa, 38 kDa were recognized by IgG and IgM antibodies. Excretory-secretory antigens present in culture supernatant with M. W. of 20, 30 kDa and in infected mouse peritoneal fluid with M.W. of 33 (P30), 45 kDa. When RH tachyzoite antigen was probed with different mice sera immunized with 2 strains of T gondii, the IgG antibody bud of Fukaya and Beverly strain (8 week-serum) is identical to those of RH strain. It is considered that the 30 kDa polypeptide detected in excretory- secretory materials and Iysate was important major antigen of T gondii (RH).

  • PDF

Genetic Environments of Au-Ag-bearing Geumhwa Hydrothermal Vein Deposit (함 금-은 금화 열수 맥상광상의 생성환경)

  • Lee, Sunjin;Choi, Sang-Hoon
    • Economic and Environmental Geology
    • /
    • v.54 no.1
    • /
    • pp.49-60
    • /
    • 2021
  • The Geumhwa Au-Ag deposit is located within the Cretaceous Gyeongsang basin. Mineral paragenesis can be divided into two stages (stage I and II) by major tectonic fracturing. Stage II is economically barren. Stage I, at which the precipitation of major ore minerals occurred, is further divided into three substages(early, middle and late) with paragenetic time based on minor fractures and discernible mineral assemblages: early substage, marked by deposition of pyrite with minor wolframite; middle substage, characterized by introduction of electrum and base-metal sulfides with Cu-As and/or Cu-Sb sulfosalts; late substage, marked by hematite and Bi-sulfosalts with secondary minerals. Changes in vein mineralogy reflect decreases in temperature and sulfur fugacity with a concomitant increase in oxygen fugacity. Fluid inclusion data indicate progressive decreases in temperature and salinity within each substage with increasing paragenetic time. During the early portion of stage I, high-temperature (≥410℃), high-salinity fluids (up to ≈44 equiv. wt. % NaCl) formed by condensation during decompression of a magmatic vapor phase. During waning of early substage, high-temperature, high-salinity fluids gave way to progressively cooler, more dilute fluids associated with main Au-Ag mineralization (middle) and finally to ≈180℃ and ≥0.7 equiv. wt. % NaCl fluids associated with hematite and sulfosalts (± secondary) mineralization (late substage). These trends are interpreted to indicate progressive mixing of high- and medium to low-salinity hydrothermal fluids with cooler, more dilute, oxidizing meteoric waters. The Geumhwa Au-Ag deposit may represent a vein-type system transitional between porphyry-type and epithermal-type.

Standardization Studies for the Oriental Mineral Medicine (광물성 약재(광물약)의 표준화에 관한 연구)

  • Kim, Seon-Ok;Park, Maeng-Eon
    • Economic and Environmental Geology
    • /
    • v.48 no.3
    • /
    • pp.187-197
    • /
    • 2015
  • Oriental mineral medicines are single or mixture of more than one mineral species or rock/fossil which are used to treat disease. Mineral medicines remove harmful or useless substances to decrease toxicity and secondary effects, and cause the manufacture of medical compounds with increased efficacy. The extraction test is an accepted in vitro system to predict the bioaccessibility of major and minor elements from mineral medicine. It incorporates gastrointerstinal tract parameters representative of a human body that including stomach and small intestinal pH which are the same as digestion condition. The bioaccessibility of a mineral medicine is the fraction that is soluble in the gastrointestinal environment and is available for absorption. Reaction path modeling in the human body can predict digestion with gastric fluid as well as absorption in the small intestine, existence in body fluids and reaction progress of the exhaust process according to pH conditions in body. Also reaction path modeling can predict bioavailability, which is equal to existence rate in the body and the form and amount of a medicine in the body after intake. The study results from predicating the existence form mineral medicines in the body, and proving the effective ingredient using bioaccessibitily and human risk assessment, suggest these that should be necessary data for new medicine development.

Performance Characteristics of Water-Chilling Heat Pump Using CO2 on Control of Inverter Frequency (인버터 주파수 제어에 따른 CO2용 수냉식 열펌프의 성능 특성)

  • Son, Chang-Hyo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.11 no.12
    • /
    • pp.4721-4726
    • /
    • 2010
  • The performance characteristics of water-chilling heat pump using CO2 for the control of inverter frequency was investigated experimentally. An experimental apparatus is consisted of a compressor, a gas cooler, an expansion valve, an evaporator and a liquid receiver. All heat exchangers used in the test rig are counter flow type heat exchangers with concentric dual tubes, which are made of copper. The gas cooler and the evaporator consist of 6 and 4 straight sections respectively arranged in parallel, each has 2.4m length. The experimental results summarize as the following: for constant inlet temperature of evaporator and gas cooler, as mass flow rate, compression ratio and discharge pressure increases with the inverter frequency. And heating capacity and compressor work increases, but coefficient of performance(COP) decreases with the inverter frequency of compressor. As inlet temperature of secondary fluid in the evaporator increases from $15^{\circ}C$ to $25^{\circ}C$, compression ratio and compressor work decreases, but mass flow rate, heating capacity and COP increases with the inverter frequency of compressor. The above tendency is similar with performance variation with respect to the variation of inverter frequency in the conventional vapor compression refrigeration cycle.