• Journal of Power System Engineering
• /
• v.11 no.3
• /
• pp.35-40
• /
• 2007

Leak would happen because of the damage of high temperature and high-pressure valve in nuclear power plant. condition based prevention maintenance is essential by using the suitable method based on local condition. Energy loss prevention can prevent from an accurate test, Local actually and ability. The methods of test for high energy fluid leak at present are analysis of ${\Delta}T$, AE(Acoustic Emission) analysis, and thermal image. The result for test of secondary system in nuclear power plant Unit reveals that the AE occurred clearly in leakage situation, but thermal image didn't occur. It is identified that leak is occurred when the orifice located front and back of valve operates. It shows that making a impatient judgment by using the single method if it is leakage is containing uncertainty. So we think that using the Multi-Measuring method is more sound judgment than single-measuring method.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.4
• /
• pp.369-377
• /
• 2013

The trends of the criteria air pollutants' concentrations over Seoul are reviewed, relative contributions of major sources are discussd, and directions for future air quality management are suggested. It was shown that the yearly average concentrations of the criteria air pollutants except nitrogen dioxide and ozone have decreased significantly over the last three decades. Though the concentration of nitrogen dioxide has not decreased, the concentration of $NO_x$ has decreased significantly. The major reason for the reduction of the criteria air pollutants has been strict government regulations such as establishment of strict emission standards and switch to cleaner fuels. However, it is not clear the major reason (s) for the reduction of the $PM_{10}$ concentration. It is suggested that to further reduce the concentrations of secondary air pollutants such as ozone and $PM_{2.5}$, understanding the major chemical pathways for them is essential. In addition, influence from outside Seoul should be quantified and effectively controlled.

• Macromolecular Research
• /
• v.12 no.5
• /
• pp.501-506
• /
• 2004

We have investigated the spectral properties of DNA, including its electric absorption, circular and linear dichroism (CD and LD), and fluorescence emission, in the DNA-linear polyethyleneimine (LPEI) and DNA-branched polyethyleneimine (BPEI) complexes at various polymer concentrations. The spectral properties of both complexes are similar. We observed a relatively moderate change in the absorption and CD spectra at low amine/DNA phosphate (NIP) ratios (< 0.5), followed by a drastic collapse within the N/P range from 0.8 and 1.0. The absorption and CD spectra recovered as the N/P ratio increased to ca. 1.2. In contrast, the LD and emission of ethidium intercalated between the DNA bases decreased almost linearly at N/P ratios between 0.0 and 1.0. These spectra never recovered at higher N/P ratios. We believe that the moderate changes in the spectrum at low N/P ratios occurred because of electrostatic interactions between DNA and BPEI, while the collapsed spectra at N/P ratios between 0.5 and 1.5 occurred because of condensation/aggregation of the DNA. Considering the structure of the polymers, we suggest that the secondary amino group of LPEI and all three amino groups of BPEI are equally involved in DNA condensation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.687-690
• /
• 2009

It has been recently reported that nano-sized MgO single crystal powders emit ultraviolet by stimulation of electrons under vacuum condition. Therefore, in this study, nano-crystalline MgO powders were applied to a xenon plasma flat fluorescent lamp for LCD backlight to improve emission efficiency of the lamp by help of extra ultraviolet from nano-MgO. For comparison with nano-crystalline MgO powders, MgO nano-thin film was applied directly on phosphors inside a lamp panel through e-beam evaporation The luminance and efficiency of FFL with an addition of MgO nano-crystal powders on phosphors were improved by around 20%. Application of MgO thin film to phosphors worsened the emission characteristics of FFLs, even rather than FFL without MgO. The reason came from insufficient stimulation of phosphors by UV, crystallinity of MgO, and low secondary electron coefficient.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.3
• /
• pp.216-223
• /
• 2008

Reburning is a useful technology in reducing nitric oxide through injection of a secondary hydrocarbon fuel. In this paper, an experimental study has been conducted to evaluate the effect of fuel lean reburning on $NO_X/CO$ reduction in LPG flame. Experiments were performed in flames stabilized by a co-flow swirl burner, which was mounted at the bottom of the furnace. Tests were conducted using LPG gas as the reburn fuel as well as the main fuel. The effects of reburn fuel fraction and injection location of the reburn fuel were studied when the fuel lean reburning system was applied. The paper reports data on flue gas emissions and temperature distribution in the furnace for a wide range of experimental conditions. At steady state, temperature distribution and emission formation in the furnace have been measured and compared. This paper makes clear that in order to decrease both NOx and CO concentrations in the exhaust when the fuel lean reburning system was adapted, it is important that the control of some factors such as initial equivalence ratio, reburn fuel fraction and temperature of reburn fuel injection region. Also it shows the fuel lean reburning is also effective method to reduce NOx as much as reburning.

• Electrical & Electronic Materials
• /
• v.10 no.2
• /
• pp.150-155
• /
• 1997

Powder type electroluminescent device(P-ELD) in this study was prepared by printing method. P-ELDs were basically composed of phosphor, insulator and transparent conducting layer. The phosphor powder was prepared by sintering the mixture of ZnS as a host, Cu as an activator, and NaCl as a flux for co-activator and enhancement of growth of the phosphor particles. The phosphor layer was made by printing the paste of the cyanoethylpullan as a binder and the ZnS system phosphor powder. In order to evaluate the luminescence characteristics of ZnS P-ELD, applied voltage - luminance(V-L), frequency-luminance(f-L), and relative luminance spectra(L- .lambda.) characteristics were measured. The experimental results show that luminance increased with increasing the applied voltage and frequency. It can be explained in terms of the potential barrier formed between ZnS and CuS. Two emission peaks in luminance-wavelength spectra measured at applied voltage of 100 $V_{rms}$ were observed at 500nm as a primary peak and 460nm as a secondary peak, respectively.y.

• Journal of Animal Science and Technology
• /
• v.61 no.3
• /
• pp.122-137
• /
• 2019

Methane, one of the important greenhouse gas, has a higher global warming potential than that of carbon dioxide. Agriculture, especially livestock, is considered as the biggest sector in producing anthropogenic methane. Among livestock, ruminants are the highest emitters of enteric methane. Methanogenesis, a continuous process in the rumen, carried out by archaea either with a hydrogenotrophic pathway that converts hydrogen and carbon dioxide to methane or with methylotrophic pathway, which the substrate for methanogenesis is methyl groups. For accurate estimation of methane from ruminants, three methods have been successfully used in various experiments under different environmental conditions such as respiration chamber, sulfur hexafluoride tracer technique, and the automated head-chamber or GreenFeed system. Methane production and emission from ruminants are increasing day by day with an increase of ruminants which help to meet up the nutrient demands of the increasing human population throughout the world. Several mitigation strategies have been taken separately for methane abatement from ruminant productions such as animal intervention, diet selection, dietary feed additives, probiotics, defaunation, supplementation of fats, oils, organic acids, plant secondary metabolites, etc. However, sustainable mitigation strategies are not established yet. A cumulative approach of accurate enteric methane measurement and existing mitigation strategies with more focusing on the biological reduction of methane emission by direct-fed microbials could be the sustainable methane mitigation approaches.

• Asian Journal of Atmospheric Environment
• /
• v.8 no.3
• /
• pp.115-125
• /
• 2014

In this study, particle composition data for $PM_{10}$ samples were collected every 3 days at Seoul, Korea from August 2006 to November 2007, and were analyzed to provide source identification and apportionment. A total of 164 samples were collected and 21 species (15 inorganic species, 4 ionic species, OC, and EC) were analyzed by particle-induced x-ray emission, ion chromatography, and thermal optical transmittance methods. Positive matrix factorization (PMF) was used to develop source profiles and to estimate their mass contributions. The PMF modeling identified nine sources and the average mass was apportioned to secondary nitrate (9.3%), motor vehicle (16.6%), road salt (5.8%), industry (4.9%), airborne soil (17.2 %), aged sea salt (6.2%), field burning (6.0%), secondary sulfate (16.2%), and road dust (17.7%), respectively. The nonparametric regression (NPR) analysis was used to help identify local source in the vicinity of the sampling area. These results suggest the possible strategy to maintain and manage the ambient air quality of Seoul.

• Progress in Superconductivity
• /
• v.14 no.2
• /
• pp.92-95
• /
• 2012

Superconducting detectors are promising as ion detectors for time-of-flight mass spectrometers (TOF MS). They can achieve mass-independent detection efficiency even for macromolecular bombardments, because output signals are produced through the deposited kinetic energy at ion impact instead of secondary electron emission that is the ion detection mechanism of conventional microchannel plate (MCP) detectors or secondary electron multipliers (SEM). Among the superconducting detectors, the superconducting strip ion detectors (SSIDs), which consist of several hundreds of superconducting lines with a width of a few hundreds nm and a thickness of a few tens of nm, have a fast response time of less than 1 ns. Inherently, the response time of SSIDs is determined by kinetic inductance, so that it was difficult to realize a fast SSID with a large detection area. However, we succeeded in realizing the detector size up to $5{\times}5mm^2$ without response time degradation by using a parallel configuration.

• Journal of Mechanical Science and Technology
• /
• v.16 no.9
• /
• pp.1112-1120
• /
• 2002

Numerical investigations on air staging and fuel staging were carried out with a newly designed coaxial cyclone combustor, which uses the method of two stage coal combustion composed of pre-combustor and main combustor. The pre-combustor with a high air/fuel ratio is designed to supply gas at high temperature to the main combustor. To avoid local high temperature region in this process, secondary air is injected in the downstream. Together with the burned gas supplied from the pre-combustor and the preheated air directly injected into main combustor, coals supplied through the main burner react rapidly at a low air/fuel ratio. Strong swirling motion of cyclone combustor keeps the wall temperature high, which makes slagging combustion possible. Alaska, US coal is used for calculations. Predictions were made for various coal flow rates in the main combustor for fuel staging and for the various flow rate of secondary air in the pre-combustor for air staging. In-scattering angles are also chosen as a variable to increase residence times of coal particles. Temperature fields and particle trajectories for various conditions are described. Predicted temperature variations at the wall of the combustor are compared with corresponding experimental data and show a similar trend. The in-scattering angle of 20° is recommended to increase the combustion efficiency in the main chamber.