• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.153-156
• /
• 2008

The use of high Xe content gas is a powerful method for improving the discharge efficacy in PDP, but the accompanying high driving voltage prevents it from being used aggressively. In this paper, we tried to find a method to lower the driving voltage under high Xe gas condition with a new protecting layer. The effective secondary electron emission caused by Xe ions can result in the low voltage driving in panels with high Xe content gas and more importantly high luminous efficacy which were confirmed with the computer simulation and panel experiment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.921-924
• /
• 2006

In an attempt to enhance secondary electron emission characteristics of PDP, $12CaO{\cdot}7Al_2O_3$ electride was used as electron emission layer of PDP discharge cells. The compound was synthesized by Ca-treatment and its electron emission behavior during the glow discharge was measured. The results indicated that the spayed electride reduces the discharge voltage by ${\sim}20$ volts and decrease the discharge delay by more than 70%.

• Journal of the Korean Statistical Society
• /
• 제31권4호
• /
• pp.519-532
• /
• 2002

K-means clustering is a well-known partitioning method of multivariate observations. Recently, the method is implemented broadly in data mining softwares due to its computational efficiency in handling large data sets. However, it does not yield a suitable visual display of multivariate observations that is important especially in exploratory stage of data analysis. The aim of this study is to develop a K-means clustering method that enables visual display of multivariate observations in a low-dimensional space, for which the projection pursuit method is adopted. We propose a computationally inexpensive and reliable algorithm and provide two numerical examples.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2007년도 춘계학술대회
• /
• pp.244-249
• /
• 2007

In this paper, in order to get the characteristics of the lithium secondary cell, such as cycle life, charge and discharge characteristic, temperature characteristic, self-discharge characteristic and the capacity recovery rate etc, we build a mathematical model of battery. In this one-dimensional model, Seven governing equations are made to solve seven variables $c,\;c_s,\;{\Phi}_1,\;{\Phi}_2,\;i_2,\;j\;and\;T$. The mathematical model parameters used in this model have been adjusted according to the experimental data measured in our lab. The connecting research of this study is to get an accurate estimate of the capacity of battery through comparison of results from simulation and fuzzy logic system. So the result data from this study is reorganized to fit the fuzzy logic algorithm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1255-1257
• /
• 2005

The increase of secondary electron-emitting coefficient is effective to reduce the discharge voltage as well as to improve the luminance efficiency of PDP. We investigated the properties of ${\gamma}$ with composition and different dielectric constants, and the microstructure of dielectric after ion collision. As a result the dielectric of PbO system showed higher ${\gamma}$ compared with Pb-free system. However, there was no difference in ${\gamma}$ when the MgO protective layer was covered.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.799-801
• /
• 2003

The secondary electron emission $coefficient({\bullet})$ of vacuum annealed MgO films has been investigated by ${\bullet}$ -focused ion beam(${\bullet}$ -FIB) system. The vacuum annealed MgO films have been found to have higher ${\bullet}$ values than those for as-deposited MgO films for Ne+ ion. Also it is found that the ${\bullet}$ for air-hold of vacuum annealed MgO layers for 24-hours is similar to that for vacuum annealed MgO films without any air-hold.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.423-428
• /
• 1995

Simulation models have been developed to predict the overall behavior of the CANDU plant systems during normal operational transients. For real time simulation purpose, simplified thermal hydraulic models are applied with appropriate system control logics, which include primary heat transport system solver with its component models and secondary side system models. The secondary side models are mainly used to provide boundary conditions for primary system calculation and to accomodate plant power control logics. Also, for the effective use of simulation package, hardware oriented basic simulation network has been established with appropriate graphic display system. Through validation with typical plant power maneuvering cases using proven plant performance analysis computer code, the present simulation package shows reasonable capability in the prediction of the dynamic behavior of plant variables during operational transients of CANDU plant, which means that this simulation tool can be utilized as a basic framework for full scope simulation network through further improvements.

• 조명전기설비학회논문지
• /
• 제21권4호
• /
• pp.28-35
• /
• 2007

In this paper, a study was made of the technology used to measure the remaining amount of energy in secondary cells, for which demand is ever increasing. First, the standard data were stored for measurement of the remaining energy and a compare/analysis algorithm was developed. Next, hardware was designed and a prototype that can display the SOC(State Of Charge) through an LCD displayinstrument was created. The small size of the prototype allows it to be portable and its performance is within ${\pm}4$[%].

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.220-223
• /
• 2007

The key role of MgO is well recognized in PDP's technology. During manufacturing, significant contamination of the oxide occurs. Getters can compete against the impurities sorption speed of the oxide layer. The analysis of the impact of a suitable getter configuration on the operational parameters of PDP's is the final goal of this study.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1098-1100
• /
• 2005

This paper presents a position control system for a linear induction motor(LIM) with cage-type secondary using direct thrust control(DTC). Also it presents a virtual instrumentation(VI) system for LIMs performance monitoring. The VI is designed using the graphical programming language LabVIEW and is capable of performing measurement functions, including data acquisition, display, and analyses at the same time. This paper reports the LIM's responses of the thrust, current, speed, and flux measured by the proposed monitoring system.