• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.806-809
• /
• 2003

Ion-induced secondary electron emission coefficient $({\gamma})$. of the patterned MgO thin film with geometrical structures has been measured by ${\gamma}$ - FIB(focused ion beam) system. The patterned MgO thin film with geometrical structures has been formed by the mask (mesh of ${\sim}$ $10{\mu}m^{2})$ under electron beam evaporation method. It is found that the higher ${\gamma}$. has been achieved by the patterned MgO thin film than the normal ones without patterning.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.8
• /
• pp.716-719
• /
• 2007

The effects of the evaporation rate of MgO films using an electron beam on the MgO properties and the discharge characteristics of a plasma display panel (PDP) were investigated and analyzed. MgO films were deposited with the various MgO evaporation rates. The MgO properties such as the crystal orientation, the surface roughness, and the film structure were inspected using XRD (X-ray diffraction), AFM (atomic force microscopy). From the experiments and Paschen law, the maximum value of the secondary electron emission coefficient $({\gamma})$ was obtained at the evaporation rate of $5{\AA}/sec$. The XRD results and cathode-luminescence (CL) spectra show the ${\gamma}$ values are correlated with F/F+ centers of the molecular structure of MgO films. The minimum firing voltage and the maximum luminous efficiency were obtained at an evaporation rate of $5{\AA}/sec$. In the MgO film deposited at $5{\AA}/sec$, the (200) orientation and F+ center were most intensive.

• 전자공학회논문지 IE
• /
• v.46 no.4
• /
• pp.57-65
• /
• 2009

This paper presents the image contrast enhancement technique suitable for local dimming backlight of small-sized mobile display while achieving the reduction of the power consumption. In addition to the large-sized TFT-LCD, small-sized one has adopted LED for backlight. Since, conventionally, LED was mounted on the side edge of a display panel, global dimming method has been widely used. However, recently, new advanced method of local dimming by placing the LED to the backside of the display panel and it raised the necessity of sub-blocked processing after partitioning the target image. When the sub-blocked image has low brightness, the supply current of a backlight LED is reduced, which gives both enhancement of contrast ratio and power consumption reduction. In this paper, we propose simple and improved image enhancement algorithm suitable for the small-sized mobile display. After partitioning the input image by equal sized blocks and analyzing the pixel information in each block, we realize the primary contrast enhancement by independently processing the sub-blocks using the information such as histogram, mean, and standard deviation values of luminance(Y) component. And then resulting information is transferred to each backlight control unit for local dimming to realize the secondary contrast enhancement as well as reduction of power consumption.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.1
• /
• pp.148-156
• /
• 2007

This paper explains stocker system that is operated in the long distance and linear area. The power system of stocker system uses Contactless Power Supply(CPS) to reduce problems of particle generation. The circuit configuration of CPS is simplified than the conventional ones, and the prototype is designed for commercial product. To transfer output data(information) from crane(secondary vehicle system) of the CPS to Primary system optical modem and TMS320F243(DSP, TI) are used between primary and secondary. power system are used, and the output voltage is controlled by operating frequency modulation. This paper is applied to stocker system controlled as one to one communication between the moving part(secondary system) and fixed part(primary system) of crane using optical modem. The study makes one to multi communication between fixed part and moving part for the purpose of multi crane operation of stocker system and must be done in the future.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2014

Properly designed plastic packages of fresh produce can preserve the quality by maintaining the optimal modified atmosphere (MA) at optimal low temperature conditions, but cannot do so at temperature abuse conditions in retail stage due to occurrence of injurious package atmosphere coming from imbalance between respiration and package gas permeation. Master packaging system consisting of a double-layered secondary package wrapping several individual (primary) packages has been proposed and applied recently to the commodities of sweet persimmon, king oyster mushroom, chestnut and strawberry. The master (secondary) pack is designed to be stored and distributed under chilled temperature, and then dismantled when moved to the retail display from the presale chilled storage. The master packaging system taking into consideration temperature dependence of produce respiration and package gas transfer was looked into with examination of its design variables to maintain the beneficial MA. Mathematical model was provided to help the design of master packaging system creating the desired MA. Its benefits of quality preservation and its limitations in practices of fresh produce marketing were discussed. Further research direction to extend the applicability of the produce master packaging system was presented.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.289.1-289.1
• /
• 2016

Germanium (Ge) with higher carrier mobility and a lower crystallization temperature has been considered as the channel material of thin-film transistors for display applications. Various methods were studied for crystallizaion of poly-Ge from amorphous Ge at low temperature. Especially Metal induced crystalliazation (MIC) process was widely studied because low process cost. In this paper, we investigate copper diffusion process of different thick (70 nm, 350 nm) poly-Ge film obtained by MIC process at various temperatures (250, 300, and $350^{\circ}C$) through atomic force microscopy (AFM), Raman spectroscopy, and secondary ion mass spectroscopy (SIMS) measurement. Crystallization completeness and grain size was similar in all the conditions. Copper diffusion profile of 370 nm poly-Ge film show simirly results regardless of process temperature. However, copper diffusion profile of 70 nm poly-Ge film show different results by process temperature.

• Journal of Multimedia Information System
• /
• v.3 no.4
• /
• pp.111-118
• /
• 2016

Today, the proliferation of various mobile devices, such as smart phones and tablet PC, brought changes in the existing TV viewing behavior. People use smart devices as secondary device while watching TV. Researches on a wide range of services linked with second-screen devices around the smart TV in the home network have been actively conducted. While there exist several Web-related technologies for connections between devices, specialized techniques for a second screen service are quite insufficient. There are still some problems related to the display of contents from multiple devices and the efficient transfer of these contents. Considering the characteristics of broadcasting systems In this study, we focus on a second screen service that permits a dynamic transfer of contents by connecting a television (TV) with mobile devices. Here, we propose a second screen service model to enable the personalization of TV contents by combining the existing broadcasting and Web-related techniques.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.5 no.1
• /
• pp.165-184
• /
• 1981

This study is concerned with a tentative plan on an arrangement and a model of university library building which is the 2nd (branch) library of J. National University in North Jeonla province. At first, it is necessary to have built new library building for undergraduate student in J. National University. Secondary, I studied on the site problems, a model, size and an arrangement planning in this campus. Finally, at least, to install modernized facilities for this library have to require as follows: 1. General Reading Room 2. Reference Room 3. Basic Reading Room 4. Free Reading Room 5. Reserved Room 6. Periodical Room 7. Seminar and Group Study Room 8. Brousing Room 9. Smoking Room 10. Display Hall.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.234-234
• /
• 1999

AC-PDP(Plasma Display Panel)에 사용하는 MgO 보호막의 이차전자 방출계수(${\gamma}$)는 AC-PDP의 방전특성을 결정짓는 중요한 요소이다. MgO 보호막의 이차전자 방출계수는 AC-PDP에 주입하는 기체의 종류에 영향을 받는다. 현재 AC-PDP에는 방전특성의 향상과 VUV 발생을 위하여 He, Ne, Ar, Xe 등의 비활성기체를 두가지 혹은 세가지로 혼합한 혼합기체가 사용되고 있다. 기체를 혼합할 경우 Penning 효과에 의해 더 좋은 방전특성을 얻을 수 있는 것으로 알려져 왔으며, 이때의 적절한 혼합비율을 찾는 것은 AC-PDP의 효율 개선에 매우 중요하다. 이번 실험에서는 (111), (100), (110) 각각의 방향으로 배향된 MgO Bulk Crystal과 MgO 보호막의 이차전자방출계수를 He+Ne+Xe 삼원기체를 사용하였다. MgO 보호막은 실제 21inch 규격의 Panel을 사용하였으며, 혼합기체의 혼합비율의 Ne:Xe을 99:1, 98:2, 96:4, 93:7과 He+Ne+Xe의 삼원기체로 다양하게 변화시켜 가며 실험하였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.12
• /
• pp.2441-2445
• /
• 2009

The effects of Si -doped MgO have been investigated in order to improve the material properties of the MgO protective layer in plasma display panels. A small amount of Si is added to the MgO pellet while the MgO layer is being deposited by using an electron-beam evaporation method. Both the surface characteristics of the protecting layer and the electro-optical properties of 4 in. test panels are investigated, such as XRD patterns, SEM images, firing and sustain voltages, secondary electron emission coefficient($\gamma$), luminance, luminous efficacy and lifetime. The firing and sustain voltage are minimized when Si concentration is 0.038%, where the luminance and luminous efficacy increase up to 17% and 26% compared with that of the pure MgO film, separately, and lifetime also shows good characteristics.