• Composites Research
• /
• 제14권5호
• /
• pp.38-45
• /
• 2001

복합적층판에 반복 열부하사이클을 부여하여 열-음향방출(thermo-AE)신호의 카이저효과Kaiser effects)를 정량적으로 분석하고 이 거동을 음향방출의 발생원인과 관련시켜 해명하였다. 열부하사이클을 반복함에 따라 음향 방출의 총 링다운 카운트수 및 진폭이 급격히 감소하는 카이저 효과를 나타냈다. 이 카이저 효과는 총 링다운 카운트 수의 지수함수로 표현되었다. 열부하 사이클 시에 발생하는 AE는 균열진전에 의만 것이 아니라, 굴곡진 균열면간의 접촉에 의만 마모 및 2차적 미세손상의 발생과 관련되며, 2차 이후의 열부하 사이클 시에는 균열면간의 마찰적 미끄러짐으로 보다 약한 AE가 적은 사상수로 발생했던 것으로 추정되었다 이러한 열-음향방출 거동은 시험편의 종류 및 열부하 시의 최고온도에 따라 다른 특성을 보였다

• 한국도서관정보학회지
• /
• 제26권
• /
• pp.261-290
• /
• 1997

98 wise sayings on the nature of book are collected from various books and analyzed in their meanings. The results of analyzing them are as follows: A book is a good friend, teacher, doctor, and guide of life. A book is an implement of enhancing man s culture and a vehicle of civilization. A book makes man find his own self and shows his way of life. A book has its own life, develops it, and doesn't lose its life, but its destination depends on its reader. Great books make man know, dominate, civilize the world. Good books are not easy to come in contact with, but immortal and life-long as a good friend. Bad books are not difficult to come in contact with, but poisonous and dull. You can judge a man by the book he reads. A book to be of help is to make man think. Great books make man begin his new life. Nationalities occupations, and periods of activity of the authors who said wise sayings are investigated and analyzed. First, the nationalities of the authors are such advanced countries with high culture as England(41%), France(21%), America(19%), Germany(5%) and Rome(5%). Secondary, their occupations are as follows : a man of letters(62%), philosopher(13%), politician(5%), and churchman(4%), and especially poet forms 32% of men of letters. Thirdly, their activity periods are mainly 19C-20C and the period form 38% of the whole.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2009년도 한국우주과학회보 제18권2호
• /
• pp.24.2-24.2
• /
• 2009

We present the results of new CCD photometry for the contact binary BX Peg, made during three successive months beginning on September 2008. As do historical light curves, our observations display an O'Connell effect and the November data by themselves indicate clear evidence for very short-time brightness disturbance. For these variations, model spots are applied separately to the two data set of Group I (Sep.--Oct.) and Group II (Nov.). The former is described by a single cool spot on the secondary photosphere and the latter by a two-spot model with a cool spot on the cool star and a hot one on either star. These are generalized manifestations of the magnetic activity of the binary system. Twenty light-curve timings calculated from Wilson-Devinney code were used for a period study, together with all other minimum epochs. The complex period changes of BX Peg can be sorted into a secular period decrease caused dominantly by angular momentum loss due to magnetic stellar wind braking, a light-travel-time (LTT) effect due to the gravitational effect of a low-mass third companion, and a previously unknown short-term oscillation. This last period modulation could be produced either by a second LTT orbit with a period of about 16 yr due to the existence of a fourth body or by the effect of magnetic activity with a cycle length of about 12 yr.

• Nuclear Engineering and Technology
• /
• 제37권2호
• /
• pp.201-206
• /
• 2005

Fretting, which is a special type of wear, is defined as small amplitude relative motion along the contacting interface between two materials. The structural integrity of steam generators in nuclear power plants is very much dependent upon the fretting wear characteristics of Inconel 690 U-tubes. In this study, a finite element model that can simulate fretting wear on the secondary side of the steam generator was developed and used for a quantitative investigation of the fretting wear phenomenon. Finite element modeling of elastic contact wear problems was performed to demonstrate the feasibility of applying the finite element method to fretting wear problems. The elastic beam problem, with existing solutions, is treated as a numerical example. By introducing a control parameter s, which scaled up the wear constant and scaled down the cycle numbers, the algorithm was shown to greatly reduce the time required for the analysis. The work rate model was adopted in the wear model. In the three-dimensional finite element analysis, a quarterly symmetric model was used to simulate cross tubes contacting at right angles. The wear constant of Inconel 690 in the work rate model was taken as $K=26.7{\times}10^{-15}\;Pa^{-1}$ from experimental data obtained using a fretting wear test rig with a piezoelectric actuator. The analyses revealed donut-shaped wear along the contacting boundary, which is a typical feature of fretting wear.

• 한국해양공학회지
• /
• 제11권3호
• /
• pp.132-143
• /
• 1997

Removal of spilled oil over the sea and the river has become one of the urgent problem in these days. Removing oil using mechanical devices are recommended because chemical dispersion can cause the secondary contamination in the environment. In the present study a series of experiments were carried out to study the effect of working conditions of a belt type skimmer on the rate of recovery for the spilled oil. The oil chosen for the present experiment was diesel oil. Three different situations, namely, upward, downward, up-and-downward pickup have been investigated for various contact angles, belt speeds and oil thicknesses. The results show that the rate of oil recovery for the case of downward pickup with a contact angle of 45.deg. shows the highest among all the conditions. For the removal of spilled diesel oil the optimal belt speed can be found as the critical value to reach the saturated pickup rate for a given oil thickness. The recovery rate of bunker C oil shows 4-6 times higher than that for diesel oil. And the optimal belt speed for bunker C oil can be found less than that for diesel oil for the same slick thickness.

• Structural Engineering and Mechanics
• /
• 제71권6호
• /
• pp.699-712
• /
• 2019

The reinforced concrete lining of hydraulic pressure tunnels tends to crack under high inner water pressure (IWP), which results in the inner water exosmosis along cracks and involves typical hydro-mechanical interaction. This study aims at the development, validation and application of an indirect-coupled method to simulate the lining cracking process. Based on the concrete damage plasticity (CDP) model, the utility routine GETVRM and the user subroutine USDFLD in the finite element code ABAQUS is employed to calculate and adjust the secondary hydraulic conductivity according to the material damage and the plastic volume strain. The friction-contact method (FCM) is introduced to track the lining-rock interface behavior. Compared with the traditional node-shared method (NSM) model, the FCM model is more feasible to simulate the lining cracking process. The number of cracks and the reinforcement stress can be significantly reduced, which matches well with the observed results in engineering practices. Moreover, the damage evolution of reinforced concrete lining can be effectively slowed down. This numerical method provides an insight into the cracking process of reinforced concrete lining in hydraulic pressure tunnels.

• Journal of Astronomy and Space Sciences
• /
• 제20권2호
• /
• pp.123-132
• /
• 2003

1995년 11월부터 1999년 12월까지 총 10일간 W형 접촉쌍성 AB And를 소백산천문대의 61cm 망원경과 BVR필터를 사용하여 CCD 측광관측을 수행하였다. 우리의 관측으로부터 AB And의 1995, 1996그리고 1999년에 걸친 년도별 광도곡선을 완성하였고, 8개의 새로운 극심시각을 결정하였다. 새로 얻은 광도곡선은 AB And가 지난 5년 동안 심한 광도변화를 겪어왔음을 보여주고 있다. 기준 광도곡선으로 선정된 1996년의 광도곡선을 Wilson-Devinney쌍성모델의 접촉모드에 적용하여 AB And의 측광해를 구하였다. 이 분석에서 광도변화의 원인을 흑점에 의한 것으로 가정하여 시스템 인자들을 산출한 후, 단지 흑점만을 조정인자로 하여 1995년과 1999년 광도곡선을 분석하였다. 그 결과, 우리는 광도변화가 반성 표면 위에 hot spot과 cool spot가 동시에 존재해서 일어난다고 해석하였다. 반성 표면 위의 hot spot는 이재우(1999)가 제안한 질량교환에 의한 것으로 유추할 수 있다.

• 한국위성정보통신학회논문지
• /
• 제10권3호
• /
• pp.1-5
• /
• 2015

최근 무선 에너지 하비스팅 기술이 센서와 같은 소형 IoT 디바이스들의 크기 제한으로 인한 배터리 부족 문제의 해결방법으로 각광을 받고 있다. 이 기술이 기존의 인지무선 네트워크에 적용된다면 인지 유저들의 운용시간 증가로 인한 네트워크 처리량의 증가를 기대할 수 있다. 본 논문에서는 인지 유저(Cognitive User)가 근처에서 동작 중인 우선 유저(Primary User)의 특정 거리 안에 존재할 때 우선 유저가 전송한 통신 신호로부터 무선 에너지 하비스팅을 하고 특정 거리 밖에 존재할 때 비어있는 채널을 골라 통신을 하도록 한다. 이 때 우선 유저와 인지 유저는 Homogeneous Poisson Pont Process 형태로 분포되어 있고 통신을 하고 있는 수신자들과 일정한 거리로 떨어져있다. 위와 같은 네트워크 모델에서 주어진 여러 가지 조건하에 인지 유저 네트워크 처리량을 최대화할 수 있는 전송파워, 인지 유저 밀도 제안하고 앞으로의 연구방향을 제시한다.

• 천문학회보
• /
• 제41권1호
• /
• pp.41.3-42
• /
• 2016

New CCD photometric observations of GX Aur have been made between 2004 and 2015. Our light curves are the first ever compiled and display the variable O'Connell effect. The light variations are satisfactorily modeled by including time-varying cool-spots on the component stars. Our light curve synthesis indicates that the eclipsing pair is an A-type contact binary with parameters of i = 81.1 deg, ${\Delta}T=36K$, q = 0.950 and f = 46%. Including our 25 timing measurements, a total of 83 times of minimum light spanning about 66 yr were used for a period study. It was found that the orbital period of GX Aur has varied due to two periodic oscillations superposed on an upward-opening parabolic variation. The long-term period increase rate is deduced as $+9.636{\times}10^{-10}d\;yr^{-1}$, which can be produced as a mass transfer from the secondary star to the primary at a rate of $3.136{\times}10^{-6}M_{\odot}\;yr^{-1}$, among the largest rates for contact systems. The periods and semi-amplitudes of the two periodic variations are about $P_3=8.7yr$ and $P_4=21.2yr$, and $K_3=0.011d$ and $K_4=0.017d$, respectively. The most reasonable explanation for both cycles is a pair of light-travel-time effects driven by the possible existence of an unseen third and fourth components with projected masses of $M_3=0.91M_{\odot}$ and $M_4=1.09M_{\odot}$ in eccentric orbits of $e_3=0.13$ and $e_4=0.73$. Because no third light was detected in the light curve synthesis, each circumbinary object could be a compact star or a binary itself.

• 대한치과보철학회지
• /
• 제37권2호
• /
• pp.256-268
• /
• 1999

Submerged implants require secondary surgical uncovering of implants after healing period of 3-6 months. In surgical methods, there are surgical scalpel, tissue punch, electro-surgical, and laser-used uncovering, and so forth The objectives of this study are investigation and assessment of 1) thermal change in clinical application for uncovering of HA-coated implant and pure titanium implant irradiated by pulsed Nd-YAG, $CO_2$, and Er-YAG laser. 2) surface change of cover screws aaer irradiation using laser energy. The temperature of apex & side wall of implants were recorded at 10sec, 20sec, 30sec after 30sec irradiation to implant healing screw; 1) pulsed Nd-YAG laser; 2W, 20pps, contact mode 2) $CO_2$ laser; water-infused & non-water infused state, 2.5-3.5W, contibuous mode, noncontact mode 3) $CO_2$ laser ; non-water infused state, 3W, superpulse, noncontact. mode 4) Er-YAG laser; (1) non-water infused state, 10pps, 60mj, contact mode (2) water-infused state, 10pps, 60mj, 80mj, 101mj, contact mode. According to the results of this study, pulsed Nd-YAG laser is not indicated because of increased thermal change and pitting of metal surface of implant cover screw. By contrast, $CO_2$ laser & Er-YAG laser are presumed to indicate because of narrow range of thermal change & near abscence of thermal damage of metal surface. Dental laser is thought to be much helpful to surgical procedure when it is used as optimal power and time condition considering characteristics and indications of each laser. Further research is needed to verify that these techniques are safe and beneficial to implant success.