Browse > Article
http://dx.doi.org/10.12989/sem.2019.71.6.699

Hydro-mechanical interaction of reinforced concrete lining in hydraulic pressure tunnel  

Wu, He-Gao (State Key Laboratory of Water Resources and Hydropower Engineering Science, Wuhan University)
Zhou, Li (State Key Laboratory of Water Resources and Hydropower Engineering Science, Wuhan University)
Su, Kai (State Key Laboratory of Water Resources and Hydropower Engineering Science, Wuhan University)
Zhou, Ya-Feng (Changjiang Institute of Survey, Planning, Design and Research)
Wen, Xi-Yu (Changjiang Geotechnical Engineering Corporation)
Publication Information
Structural Engineering and Mechanics / v.71, no.6, 2019 , pp. 699-712 More about this Journal
Abstract
The reinforced concrete lining of hydraulic pressure tunnels tends to crack under high inner water pressure (IWP), which results in the inner water exosmosis along cracks and involves typical hydro-mechanical interaction. This study aims at the development, validation and application of an indirect-coupled method to simulate the lining cracking process. Based on the concrete damage plasticity (CDP) model, the utility routine GETVRM and the user subroutine USDFLD in the finite element code ABAQUS is employed to calculate and adjust the secondary hydraulic conductivity according to the material damage and the plastic volume strain. The friction-contact method (FCM) is introduced to track the lining-rock interface behavior. Compared with the traditional node-shared method (NSM) model, the FCM model is more feasible to simulate the lining cracking process. The number of cracks and the reinforcement stress can be significantly reduced, which matches well with the observed results in engineering practices. Moreover, the damage evolution of reinforced concrete lining can be effectively slowed down. This numerical method provides an insight into the cracking process of reinforced concrete lining in hydraulic pressure tunnels.
Keywords
hydraulic pressure tunnel; reinforced concrete lining; hydro-mechanical interaction; crack; indirect-coupled method; friction-contact method;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Su, K., Yang, Z., Zhang, W., Wu, H., Zhang, Q., and Wu, H. (2017), "Bearing mechanism of composite structure with reinforced concrete and steel liner: An application in penstock", Eng. Struct., 141, 344-355. https://doi.org/10.1016/j.engstruct.2017.03.021.   DOI
2 Wriggers, P., (2006), Computational Contact Mechanics, Springer, Germany.
3 Wriggers, P., and Zavarise, G., (2004), Computational Contac Mechanics, Encyclopedia of Computational Mechanics, Wiley, New Jersey, USA.
4 Jankowiak, T., and Lodygowski, T. (2005), "Identification of parameters of concrete damage plasticity constitutive model", Foundation. Civil. Environ. Eng., 6, 53-69.
5 Lee, J., and Fenves, G. L. (1998), "Plastic-damage model for cyclic loading of concrete structures", J. Eng. Mech., 124(8), 892-900. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892).   DOI
6 Leung, C., and Meguid, M. A. (2011), "An experimental study of the effect of local contact loss on the earth pressure distribution on existing tunnel linings", Tunnel. Underground Space Technol., 26(1), 139-145. https://doi.org/10.1016/j.tust.2010.08.003.   DOI
7 Lubliner, J., Oliver, J., Oller, S., and Onate, E. (1989), "A plasticdamage model for concrete", J. Solid. Struct., 25(3), 299-326. https://doi.org/10.1016/0020-7683(89)90050-4.   DOI
8 Lyu, D., Yu, C., Ma, S., and Wang, X. (2018), "Nonlinear seismic response of a hydraulic tunnel considering fluid-solid coupling", Math. Problem. Eng., 2018, 1-12. https://doi.org/10.1155/2018/9608542.
9 Mazars, J., and Pijaudier Cabot, G. (1989), "Continuum damage theory-application to concrete", J. Eng. Mech., 115(2), 345-365. https://doi.org/10.1061/(ASCE)0733-9399(1989)115:2(345).   DOI
10 MOHURD, (2010), Code for design of concrete structure GB50010-2010; China Architecture & Building Press, Beijing, China.
11 Olumide, B. A. (2013), "Numerical coupling of stress and seepage in the design of pressure tunnel under to high internal water pressure", J. Eng. Technol., 3(3), 235-244.
12 Olumide, B. A., and Marence, M. (2012), "A finite element model for optimum design of plain concrete pressure tunnels under high internal pressure", J. Eng. Technol., 1(5), 235-244.
13 Schleiss, A. J. (1997), "Design of reinforced concrete linings of pressure tunnels and shafts", Int. J. Hydropow. Dams, 4(3), 88-94.
14 Picandet, V., Khelidj, A., and Bellegou, H. (2009), "Crack effects on gas and water permeability of concretes", Cement Concrete Res., 39(6), 537-547. https://doi.org/10.1016/j.cemconres.2009.03.009.   DOI
15 Rama, J. S. K., Chauhan, D. R., Sivakumar, M. V. N., Vasan, A., and Murthy, A. R. (2017), "Fracture properties of concrete using damaged plasticity model -a parametric study", Struct. Eng. Mech., 64(1), 59-69. https://doi.org/10.12989/sem.2017.64.1.059.   DOI
16 Salehnia, F., (2015). "From some obscurity to clarity in Boom Clay behavior: Analysis of its coupled hydro-mechanical response in the presence of strain localization", Ph.D Dissertation, Universite' de Lie'ge, Liege.
17 Salehnia, F., Sillen, X., Li, X. L., and Charlier, R. (2017), "Numerical simulation of a discontinuous gallery lining's behavior, and its interaction with rock", J. Numeric. Anal. Method. Geomech., 41, 15691589. https://doi.org/10.1002/nag.2689.
18 Schleiss, A. J. (1986), "Design of pervious pressure tunnels", Water Power Dam Constr., 5, 21-26.
19 Shin, J. H. (2008), "Numerical modeling of coupled structural and hydraulic interactions in tunnel linings", Struct. Eng. Mech., 29(1), 1-16. https://doi.org/10.12989/sem.2008.29.1.001.   DOI
20 Shin, J., Kim, S., and Shin, Y. (2012), "Long-term mechanical and hydraulic interaction and leakage evaluation of segmented tunnels", Soils and Foundations, 52(1), 38-48. https://doi.org/10.1016/j.sandf.2012.01.011.   DOI
21 Simanjuntak, T. D. Y. F., Marence, M., Mynett, A. E., and Schleiss, A. J. (2013), "Mechanical-hydraulic interaction in the lining cracking process of pressure tunnels", Int. J. Hydropow. Dams, 20(5), 98-105.
22 Zareifard, M. R. (2018), "An analytical solution for design of pressure tunnels considering seepage loads", Applied Mathematical Modelling, 62, 62-85. https://doi.org/10.1016/j.apm.2018.05.032.   DOI
23 Xiao, M., and Zhao, C. (2017), "Stability Analysis of Steel Lining at Pressure Diversion Tunnel Collapse Zone during Operating Period", Math. Problem. Eng., 2017, 1-14. https://doi.org/10.1155/2017/3280414.
24 Xue, W., Yao, Z., Jing, W., Tang, B., Kong, G., and Wu, H. (2019), "Experimental study on permeability evolution during deformation and failure of shaft lining concrete", Construct. Build. Mater., 195, 564-573. https://doi.org/10.1016/j.conbuildmat.2018.11.101.   DOI
25 Yan, Q., Li, B., Deng, Z., and Li, B. (2018), "Dynamic responses of shield tunnel structures with and without secondary lining upon impact by a derailed train", Struct. Eng. Mech., 65(6), 741-750. https://doi.org/10.12989/sem.2018.65.6.741.   DOI
26 Yoo, C. (2005), "Interaction between Tunneling and Groundwater-Numerical Investigation Using Three Dimensional Stress-Pore Pressure Coupled Analysis", J. Geotech. Geoenviron. Eng. 131(2), 240-250. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:2(240).   DOI
27 Yoon, J., Han, J., Joo, E., and Shin, J. (2014), "Effects of Tunnel Shapes in Structural and Hydraulic Interaction", KSCE J. Civil Eng., 18(3), 735-774. https://doi.org/10.1007/s12205-014-1325-1.   DOI
28 Zareifard, M. R., and Fahimifar, A. (2016), "A simplified solution for stresses around lined pressure tunnels considering non-radial symmetrical seepage flow", KSCE J. Civil Eng., 20(7), 2640-2654. https://doi.org/10.1007/s12205-016-0105-5.   DOI
29 Zhang, Q., and Wu, H. (2016), "Sliding behaviour of steel liners on surrounding concrete in c-cross-sections of spiral case structures", Struct. Eng. International, 333-340. https://doi.org/10.2749/101686616X14676302920032.   DOI
30 Zhang, W., Dai, B., Liu, Z., and Zhou, C. (2018), "Numerical algorithm of reinforced concrete lining cracking process for pressure tunnels", Eng. Comput., 35(1), 91-107. https://doi.org/10.1108/EC-11-2016-0394.   DOI
31 Zhou, L., Su, K., Zhou, Y., Wen, X., and Wu, H. (2018), "Hydromechanical coupling analysis of pervious lining in high pressure hydraulic tunnel", J. Hydraulic Eng., 49(3), 313-322.
32 Bian, K., Xiao, M., and Chen, J. (2009), "Study on coupled seepage and stress fields in the concrete lining of the underground pipe with high water pressure", Tunnel. Underground Space Technol., 24(3), 287-295. https://doi.org/10.1016/j.tust.2008.10.003.   DOI
33 Zhou, Y., Su, K., and Wu, H. (2015), "Hydro-mechanical interaction analysis of high pressure hydraulic tunnel", Tunnel. Underground Space Technol., 47, 28-34. https://doi.org/10.1016/j.tust.2014.12.004.   DOI
34 ABAQUS (2011), "User's Manual", Version 6.11. Dassault Systemes.
35 Bian, K., Liu, J., Xiao, M., and Liu, Z. (2016), "Cause investigation and verification of lining cracking of bifurcation tunnel at Huizhou Pumped Storage Power Station", Tunnel. Underground Space Technol., 54(27), 123-134. https://doi.org/10.1016/j.tust.2015.10.030.   DOI
36 Bobet, A., and Nam, S. W. (2007), "Stresses around pressure tunnels with semi-permeable liners", Rock Mech. Rock Eng., 40(3), 287-315. https://doi.org/10.1007/s00603-006-0123-6.   DOI
37 Cicekli, U., Voyiadjis, G. Z., and Al-Rub, R. K. A. (2007), "A plasticity and anisotropic damage model for plain concrete", J. Plasticity, 23(10-11), 1874-1900. https://doi.org/10.1016/j.ijplas.2007.03.006.   DOI
38 Dadashi, E., Noorzad, A., Shahriar, K., and Goshtasbi, K. (2017), "Hydro-mechanical interaction analysis of reinforced concrete lining in pressure tunnels", Tunnel. Underground Space Technol., 69, 125-132. https://doi.org/10.1016/j.tust.2017.06.006.   DOI
39 Demir, A., Caglar, N., Ozturk, H., and Sumer, Y. (2016), "Nonlinear finite element study on the improvement of shear capacity in reinforced concrete T-Section beams by an alternative diagonal shear reinforcement", Eng. Struct., 120, 158-165. https://doi.org/10.1016/j.engstruct.2016.04.029.   DOI
40 Dadashi, E., Noorzad, A., Shahriar, K., and Goshtasbi, K. (2018), "An optimal method to design reinforced concrete lining of pressure tunnels", J Mining Environ., 9(4), 829-837.
41 Fahimifar, A., and Zareifard, M. R. (2009), "A theoretical solution for analysis of tunnels below groundwater considering the hydraulic-mechanical coupling", Tunnel. Underground Space Technol., 24(6), 634-646. https://doi.org/10.1016/j.tust.2009.06.002.   DOI
42 Fahimifar, A., and Zareifard, M. R. (2013), "A new closed-form solution for analysis of unlined pressure tunnels under seepage forces", J. Numeric. Anal. Method. Geomech., 37(11), 1591-1613. https://doi.org/10.1002/nag.2101.   DOI
43 Fernandez, G. (1994), "Behavior of pressure tunnels and guidelines for liner design", J. Geotechn. Eng., 120(10), 1768-1791. https://doi.org/10.1061/(ASCE)0733-9410(1994)120:10(1768).   DOI
44 Grassl, P., and Jirasek, M. (2006), "Damage-plastic model for concrete failure", J. Solid. Struct., 43(22-23), 7166-7196. https://doi.org/10.1016/j.ijsolstr.2006.06.032.   DOI
45 Graziani, A., and Boldini, D. (2012), "Influence of hydromechanical coupling on tunnel response in clays", J. Geotech. Geoenviron. Eng. 138(3), 415-418. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000597.   DOI
46 Hou, J. (2009), "Observed data analysis of water filling test of the high-pressure tunnel in Tianhuangping Pumped-Storage Power Station", Adv. Sci. Technol. Water Resource.29(2), 27-31.   DOI
47 Jaeger, C., (1979), Rock Mechanics and Engineering, Second ed., Cambridge University Press, London, England.