• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1997.04a
• /
• pp.53-70
• /
• 1997

The purpose of this study is to propose what developments for Korean Maritime high school are. In order to find out some proposals, the concerned literature survey and sata are used accordingly. This paper is consisted of 4 chapters. The contents of first chapter are focused on the study purpose and problems facing on the maritime high schools. The second are on the present situation of these schools. The third are on the improving proposals, the fourth are on the conclustions of this paper. The following proposals are abstracted through this study. The first, competent authority should be transferred to ministry of education from ministry of marine. The second, education system should be upgraded to junior college or 5 years education course. The third, maritime university permission should be opened for maritime high schol graduates. The fourth, training ship should be build for effective training course required from STCW 95. The fifth , if the graduates from maritime high school engage on board , all of them should be exempted from military service responsibility. The sixth , the education course should be diversified according to the need and demand from the industry society and students. The seventh, the on board-training system for teachers and instructors should be programmed in order to help them keep and utilize the on board experience in actural eudcation situation.

• Structural Engineering and Mechanics
• /
• v.77 no.5
• /
• pp.627-635
• /
• 2021

The speed of rail vehicles become higher and higher over two decades, and China has unveiled a prototype high-speed train in October 2020 that has been able to reach 400 km/h. At such high speeds, wheel-rail force items that had previously been ignored in common computational model should be reevaluated and reconsidered. Aiming at this problem, a new model for investigating the vehicle-bridge interaction at high moving speed is proposed. Comparing with the common model, the new model was more accurate and applicable, because it additionally considers the second-order pseudo-inertia forces effect and its modeling equilibrium position was based on the initial deformed curve of bridge, which could include the influences of temperature, pre-camber, shrinkage and creep deformation, and pier uneven settlement, etc. Taking 5 km/h as the speed interval, the dynamic responses of the classical vehicle-bridge system in the speed range of 5 km/h to 400 km/h are studied. The results show that ignoring the second-order pseudo-inertia force will underestimate the dynamic response of vehicle-bridge system and make the high-speed railway bridge structure design unsafe.

• Journal of Photoscience
• /
• v.10 no.2
• /
• pp.203-208
• /
• 2003

Two coupled molecules were successfully synthesized by condensation of amine-donor-substituted barbituric acid derivativies as nonlinear optical chromophores. A flexible spacer of the alkyl chain with different lengths of carbon chains (5 and 6 carbons) was introduced between two chromophores, which prevented crystallization and aggregation of molecules. Two coupled molecules (B-Cn-B, n=5, 6) had glass-transition temperatures on a second heating around 81 and 76$^{\circ}C$ without melting points, respectively. To explore the linear optical properties, thin-films were prepared and examined by a photometry method using Nd:YVO$_4$ CW laser. Also, microscopic and macroscopic nonlinear optical properties were measured by Hyper-Rayleigh Scattering (HRS) and the Maker Fringes method using Nd:YAG ps pulse laser, respectively. In spite of the moderate hyperpolarizabilities of coupled molecules, the second order NLO coefficient (d$\_$33/) was larger than the conventional Disperse Red 1 doped PMMA polymeric system.

• Management Science and Financial Engineering
• /
• v.4 no.2
• /
• pp.15-42
• /
• 1998

A joint problem of order delivery, setup reduction, and cost-sharing in a two-echelon inventory system in which a vendor supplies multiple products to a group of buyers is studied here. The basic premise is that buyers have independently implemented setup reduction programs to acquire benefits from small order sizes. Doing so, however, causes the buyers' individually optimal order cycles to be differ from that of the vendor. In conjunction with this, two models are considered. In the first model, a multi-buyers single product situation is considered in which the vendor implements a joint supply cycle policy. However, buyers, as the dominant party, insist after implementing the individually optimal setup reduction that the vendor accept their individually optimal order schedules. In the second model. a multi-products, single buyer situation is considered in which the buyer implements a joint order policy. Here, the vendor, as the dominant party, refuses to cooperate fully with the buyer's individually reduced joint order schedule, and designs his own individually optimal setup reduction mix for each product under a given budget constraint. This led to a study of an integrated Setup Reduction/Break-even Pricing Policy for each situation to eliminate mismatches in individually optimal cycle times.

• Investigative Magnetic Resonance Imaging
• /
• v.4 no.1
• /
• pp.20-26
• /
• 2000

Gradient moment nulling techniques require the introduction of an additional gradient on each axis for each order of motion correction to be applied. The additional gradients introduce new constraints on the sequence design and increase the demands on the gradient system. The purpose of this paper is to demonstrate techniques for optimization of gradient echo gradient moment nulling sequences within the constraints of the gradient hardware. Flow compensated pulse sequences were designed and implemented on a clinical magnetic resonance imaging system. The design of the gradient moment nulling sequences requires the solution of a linear system of equations. A Mathematica package was developed that interactively solves the gradient moment nulling problem. The package allows the physicist to specify the desired order of motion compensation and the duration of the gradients in the sequence with different gradient envelopes. The gradient echo sequences with first, second, and third order motion compensation were implemented with minimum echo time. The sequences were optimized to take full advantage of the capabilities of the gradient hardware. The sequences were used to generate images of phantoms and human brains. The optimized sequences were found to have better motion compensation than comparable standard sequences.

• International Journal of Computer Science & Network Security
• /
• v.22 no.4
• /
• pp.1-12
• /
• 2022

In order to overcome the power fluctuation issues in photovoltaic (PV) smart grid-connected systems and the inverter nonlinearity model problem, an adaptive backstepping command-filter and a double second order generalized Integrators (DSOGI) controller are designed in order to tune the AC current and the DC-link voltage from the DC side. Firstly, we propose to present the filter mathematical model throughout the PV system, at that juncture the backstepping control law is applied in order to control it, Moreover the command filter is bounded to the controller aiming to exclude the backstepping controller differential increase. Additionally, The adaptive law uses Lyapunov stability criterion. Its task is to estimate the uncertain parameters in the smart grid-connected inverter. A DSOGI is added to stabilize the grid currents and eliminate undesirable harmonics meanwhile feeding maximum power generated from PV to the point of common coupling (PCC). Then, guaranteeing a dynamic effective response even under very unbalanced loads and/or intermittent climate changes. Finally, the simulation results will be established using MATLAB/SIMULINK proving that the presented approach can control surely the smart grid-connected system.

• Korea Journal of Hospital Management
• /
• v.25 no.1
• /
• pp.32-45
• /
• 2020

Purpose: The purpose of this research is to develop two medical tourism system models which explain medical tourism phenomenon with a systemic approach. Methodology/Approach: This research was conducted using a qualitative data analysis which mainly refer previous references in relation to medical tourism in the areas of tourism and medicine. Leiper's tourism system model was utilized as a conceptual framework. In-depth interviews with experts in the area were attempted in order to pretest the models. Findings: This research suggests a medical tourism system framework and a medical service provision framework. The first model presents medical tourism components and their relationships within a framework presented in a diagram. The second model shows the relationships among medical services required by medical tourists, the service providers, and service human resources along with movements of medical tourists. Practical Implications: The first model presents a spatial composition of medical tourism components and their relationships, whereas the second model shows the linkage among medical services, the service providers, and relevant service human resources along with time sequential steps of medical tourists. These two models are complementary and may be used as useful tools to observe medical tourism phenomenon with a systemic and holistic approach. These two models may enable stake holders avoid unnecessary confusions and conflicts that result in duplication of government policies and a waste of budget and human resources.

• Journal of Korea Trade
• /
• v.25 no.2
• /
• pp.1-21
• /
• 2021

Purpose - The purpose of this research is to develop two medical tourism system models which explain medical tourism phenomenon with a systemic approach. Design/methodology - This research was conducted by using a qualitative data analysis which mainly refers to previous references of medical tourism in the areas of tourism and medicine. Leiper's tourism system model was utilized as a conceptual framework. In-depth interviews with experts in the field were conducted in order to pretest the models. Findings - This research suggests a medical tourism system framework and a medical service provision framework. The first model presents medical tourism components and their relationships within a framework presented in a diagram. The second model shows the relationships among medical services required by medical tourists, the service providers, and service human resources along with movements of medical tourists. Originality/value - The first model presents a spatial composition of medical tourism components and their relationships, whereas the second model shows the linkage among medical services, the service providers, and relevant service human resources along with time sequential steps of medical tourists. These two models are complementary and may be used as useful tools to observe medical tourism phenomenon with a systemic and holistic approach. These two models may enable stake holders avoid unnecessary confusions and conflicts that result in duplication of government policies and a waste of budget and human resources.

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.1
• /
• pp.43-51
• /
• 2000

The response statistics of a hinged-clamped beam under broad-band random excitation is investigated. The random excitation is applied at the nodal point of the second mode. By using Galerkin's method the governing equation is reduced to a system of nonautonomous nonlinear ordinary differential equations. A method based upon the Markov vector approach is used to generate a general first-order differential equation in the dynamic moment of response coordinates. By means of the Gaussian and non-Gaussian closure methods the dynamic moment equations for the random responses of the system are reduced to a system of autonomous ordinary differential equations. The case of two mode interaction is considered in order to compare it with the case of three mode interaction. The analytical results for two and three mode interactions are also compared with results obtained by Monte Carlo simulation.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.242-244
• /
• 2000

This paper presents a method for real-time estimation of TCSC quantity in order to enhance the power system transient stability energy margin using fuzzy neural network in multi-machine system. This paper has two parts, the first part is to estimate the energy margin. To set critical energy, we use the potential energy boundary surface(PEBS) method which one of the transient energy function(TEF) method. And the second is to determine the TCSC quantify and the line to be injected. In order to make training data in this step, we use genetic algorithm. The proposed method is applied to 6-bus, 7-line, 4-machine model system to show its effectiveness.