• 한국해양공학회지
• /
• 제23권1호
• /
• pp.74-80
• /
• 2009

In this study, the static and modal analyses to find the characteristic of eigenvalues for a towed cable were with a free boundary condition at the bottom end carried out with numerical study. The resulting numerical code with finite element method was used to study sample problems for a cable with towing speeds. After tracing the equilibrium state with a towing speed through the static analysis, modal analysis on the basis of static results was performed. The static top tension for a critical towing speed is nearly 50 percent of what it was for a free hanging pipe. From static analyses, it is found that towing speed has a noticeable effect on top tension of a towed pipe. At a high towing speed, differences between the first and second periods become larger. Compared to the fundamental period for a free hanging pipe, that for a towed pipe with a critical towing speed is approximately 1.4 times larger. This result is very important point in that the lock in condition and tension of the towed cable system with top excitation can be predicted. The corrected close form solution to solve natural periods for a towed cable was presented in this study. The code is validated by comparison of the results of theoretical and numerical studies. Two results were in very good agreement. This study can contribute to predicting the lock-in condition and tension for a towed cable or pipe with top excitation.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권4호
• /
• pp.256-266
• /
• 2016

Concurrently detected and annotated abnormal events can have a significant impact on surveillance systems. By considering the specific domain of pedestrian trajectories, this paper presents two main contributions. First, as introduced in much of the work on trajectory-based anomaly detection in the literature, only information about pedestrian paths, such as direction and speed, is considered. Differing from previous work, this paper proposes a framework that deals with additional types of trajectory-based anomalies. These abnormal events take places when a person enters prohibited areas. Those restricted regions are constructed by an online learning algorithm that uses surrounding information, including detected pedestrians and background scenes. Second, a simple data-boosting technique is introduced to overcome a lack of training data; such a problem particularly challenges all previous work, owing to the significantly low frequency of abnormal events. This technique only requires normal trajectories and fundamental information about scenes to increase the amount of training data for both normal and abnormal trajectories. With the increased amount of training data, the conventional abnormal trajectory classifier is able to achieve better prediction accuracy without falling into the over-fitting problem caused by complex learning models. Finally, the proposed framework (which annotates tracks that enter prohibited areas) and a conventional abnormal trajectory detector (using the data-boosting technique) are integrated to form a united detector. Such a detector deals with different types of anomalous trajectories in a hierarchical order. The experimental results show that all proposed detectors can effectively detect anomalous trajectories in the test phase.

• 한국실내디자인학회논문집
• /
• 제24권2호
• /
• pp.100-107
• /
• 2015

The paper begins with the idea of the society of the continued rooms that building connects architectural space (building interior) and urban open space (urban interior) or countryside/rural open space (territorial interior). It gives an account of, through literature review, a theoretical possibility of integrating not only architecture and urbanism but also architecture and countryside/rural planning. The first site explores the continuously articulated and connected spaces between building interior, urban interior, and territorial interior, in understanding Alberti's analogy, "A house is a little city." (1452) The second site illustrates architecture as an open boundary and a spatial medium which makes building, urban, and territorial interiors connect and makes them continuous. There is an opportunity of reading the continued relations and the continua of spaces. The third site deals with the form of building that architecture creates for building interior (society of rooms) and urban interior (society of urban rooms), and moderates the interiors. The last site clarifies the territorial interior (society of countryside/rural rooms) that constitutes homogeneous spatiality moderated by architecture between building interior and urban interior. The paper discusses the society of the continued interiors(building/urban/territorial interiors) that ought to be a fundamental truth in the field of every project which deals with a unit of space. It logically clarifies the society of the interiors, not isolated and blocked off but multilayered and continued. It comes to the conclusion that the territorial interior should be subsumed under the design field and the society of the continued rooms ought to be considered as a united object of space in the fields of interior architecture/design, architecture, landscape, urbanism and countryside/rural planning. Ultimately, it aims at offering a departing point of discourse and a theoretical foundation for the future studies on urban interior and territorial interior.

• 복식
• /
• 제58권2호
• /
• pp.93-106
• /
• 2008

Asia Folk Costumes are certainly different from the Western Costumes. This distinction is based upon the effect of environment, technology, and social structure, and especially, which was generated by religion, ideology, and philosophy. The ideas of fundamental ground of this eastern features are religions such as Buddhism, Taoism, and Confucianism. The religion of the East has determined the form of traditional costumes, affecting the costume up to now. This study aims at the investigation of the effect of religion on the formation of East Asia Traditional Costumes around Korea, China, and Japan and its figurative beauty. Study was carried out by chiefly referring to literatures. Eastern Aesthetics was formed by accepting aesthetic concepts, acquired from the idea of Three Religions. Especially, the ideas of non-duality(不二), emptiness(空), five aggregates(五蘊), mind control(心法), derived by Buddhism, and nature theory(自然論) and creationism(創造論) of Taoism, and abstinence theory(節制論) and decorum(禮法) and the principles of Yin and Yang(陰陽) of confucianism have had great effect on the aesthetics of costume. The figurative features of costume, affected by three religions are described by the factors; First, non structural feature, second, the beauty of abstinence and chastity of ample silhouette, third, the feature of natural color and achromatic color, fourth, the figurative feature of costume by the principles of Yin and Yang, and fifth, bright ornaments. The aesthetic values of the East Asia Costume are 'A Beauty of Vacancy', 'A Beauty of Concealment', 'A Beauty of Nature', and 'A Beauty of Symbolism'. As philosophy, culture, and ethnics itself, the religions of Asia have had effect on the overall culture, which is inclusive of social structure, as well as art and aesthetics, and have decided the style of costume.

• 한국의류학회지
• /
• 제14권3호
• /
• pp.208-215
• /
• 1990

The purpose of this study is to provide the fundamental data of a dummy design for more suitable ready made clothing by making a pattern of somatic types and analyzing their morphological characteristics in accordance with different pattern of somatic types. The side view silhouettes of 90 junior high school girls of age $13\~16$ in seoul urban area were measured by means of the plan photographing and the low data were examined by principal component analysis, while the principal component analysis was applied and three components were extracted and then interpreted to explain to variation of the form of the body. Using three components respectively the cluster analysis was carried out and the subject classified into 4 cluster The following outcomes are obtained. . The results of principal component analysis of this study would be turned out the three; 1) The first principal component shows the degree of erectness or stoop of the figure. 2) The second principal component was a stature length or a growth rate. 3) The third principal component was the obesity component. 2. The results of cluster analysis by using three principal component analysis would be turned out the four cluser; 1) Cluster 1 ($29\%$ of the total) is characterized with lower stature. 2) Cluster 2 ($21\%$ of the total) is characterized with backward somatotype, and the highest leg. 3) Cluster 3 ($23\%$ of the total) is thicked back of neck. 4) Cluster 4 ($27\%$ of the total) is characterized with forward somatotype, and highest stature, height.

• Nuclear Engineering and Technology
• /
• 제46권6호
• /
• pp.847-856
• /
• 2014

Spent resin waste containing a high concentration of $^{14}C$ radionuclide cannot be disposed of directly. A fundamental study on selective $^{14}C$ stripping, especially from the IRN-150 mixed bed resin, was carried out. In single ion-exchange equilibrium isotherm experiments, the ion adsorption capacity of the fresh resin for non-radioactive $HCO_3{^-}$ ion, as the chemical form of $^{14}C$, was evaluated as 11mg-C/g-resin. Adsorption affinity of anions to the resin was derived in order of $NO_3{^-}$ > $HCO_3{^-}{\geq}H_2PO_4{^-}$. Thus the competitive adsorption affinity of $NO_3{^-}$ ion in binary systems appeared far higher than that of $HCO_3{^-}$ or $H_2PO_4{^-}$, and the selective desorption of $HCO_3{^-}$ from the resin was very effective. On one hand, the affinity of $Co^{2+}$ and $Cs^+$ for the resin remained relatively higher than that of other cations in the same stripping solution. Desorption of $Cs^+$ was minimized when the summation of the metal ions in the spent resin and the other cations in solution was near saturation and the pH value was maintained above 4.5. Among the various solutions tested, from the view-point of the simple second waste process, $NH_4H_2PO_4$ solution was preferable for the stripping of $^{14}C$ from the spent resin.

• 전자공학회논문지S
• /
• 제35S권10호
• /
• pp.19-26
• /
• 1998

본 논문에서는 TTIB SSB 방식을 이용한 협대역 이동통신시스템에서 페이딩 보상 시스템의 설계 및 구현에 관한 연구를 수행하였다. 다중경로 페이딩 갖는 이동통신채널은 무선통신시스템의 성능을 필연적으로 제한하게 한다. 이러한 다중경로 페이딩은 TTIB SSB 방식에서 파일럿 톤을 이용하여 보상할 수 있다. DSP(digital signal processor)를 이용하여 TTIB SSB 송 ${\cdot}$ 수신기를 구현하였으며 또한 페이딩 보상은 DSP 알고리즘 형태로 수신기에 구현하였다. TTIB SSB 송 ${\cdot}$ 수신기에서 페이딩 보상 성능을 평가하기 위하여 먼저 시뮬레이션을 이용하였다. 시뮬레이션의 결과로 TTIB SSB 송 ${\cdot}$ 수신기에서 페이딩을 보상할 수 있음을 알 수 있었다. 두 번째로 DSP 보드를 이용하여 TTIB SSB 송 ${\cdot}$ 수신기 구현에 대한 실험을 하였고 다음으로 중심 주파수가 145MHz인 RF 회로를 포함하여 실험하였다. 이 실험을 통하여 TTIB SSB 송 ${\cdot}$ 수신기에서 페이딩 보상 성능은 시뮬레이션을 통하여 얻은 결과와 같은 결과를 얻을 수 있었다.

• 복식
• /
• 제63권6호
• /
• pp.56-68
• /
• 2013

A purpose of this study is to do fundamental research of construction of coat patterns in the Daehan Empire in order to make replicas of the costumes. This study is composed of literature research, investigation of artifacts, and experiment of pattern making. The results of this study are as follows. First, even if the 15th Court Dress Rules regulated color, fabric, number of flower, width of braid, and size of button, there was no regulation regarding the shape of the coat. The analysis of the photos in those periods shows that the style of the tailcoat was different from that of today in the length of the front, the shape of breast and collar. Second, six artifacts in the collection showed that the shoulder line and the sideline were located on the further rear side than the current tailcoat. This can be confirmed in the western and Japanese pattern book, and especially the pattern drafting method in the books published in Japan in 1900s is different from current one in setting base lines of front bodice and back bodice. As a result, based on several experiments, this study proposes how to make coat patterns. The shoulder line, the sideline, and the princess line should be located in the back of the dress similar to the shape of swallowtail coats of 1900s. The front bodice should be constructed without the composition line in order to add embroidery on it. The collar, which shape looks like long half moon, should form V-shape neckline in the front breast when adjusting dress. The sleeves should be constructed top and down, and it should curve more than the modern design.

• 한국의류산업학회지
• /
• 제17권2호
• /
• pp.265-277
• /
• 2015

The aim of this study was to successfully reflect human body changes on the transformation of the virtual body within 3D virtual fitting spaces. For this purpose, existing problems of shape transformation of the virtual body were analyzed and regression equations which provides useful basic data for transformation of the virtual body that can be applied usefully to the 3D virtual fitting system was developed. Necessary data for the analyses were body measurement and 3D scan data of women with average physical form between the ages of 40 through 49. The reason that we used human body changes of the female subjects in their forties was based on the recognition that fundamental female body changes start to occur from age of forty. Body shapes were largely divided into 3 groups according to obesity which was found to be the biggest factor of shape change. Seven factors were extracted based on factor analysis of 47 body measurement categories and regression equations were created to extract specific measurements for each BMI group based on these seven factors. The major contribution of this paper can be summarized as follows. First, the regression equations to extract specific measurements based on the 7 representative variables remediated existing problem of virtual bodies as it increased the number of body shape transformation areas. Second, the regression equations helped to overcome the problem of current failing to reflecting changes in body cross-section shape based on simple girth measurements based on analysis of cross-section distances.

• Computers and Concrete
• /
• 제2권6호
• /
• pp.423-437
• /
• 2005

In this study two single-bay, three-storey space frames, one with brick masonry infill in the second and third floors representing a soft-storey frame and the other without infill were designed and their 1:3 scale models were constructed according to non-seismic detailing and the similitude law. The models were excited with an intensity of earthquake motion as specified in the form of response spectrum in Indian seismic code IS 1893-2002 using a shake table. The seismic responses of the soft-storey frame such as fundamental frequency, mode shape, base shear and stiffness were compared with that of the bare frame. It was observed that the presence of open ground floor in the soft-storey infilled frame reduced the natural frequency by 30%. The shear demand in the soft-storey frame was found to be more than two and a half times greater than that in the bare frame. From the mode shape it was found that, the bare frame vibrated in the flexure mode whereas the soft-storey frame vibrated in the shear mode. The frames were tested to failure and the damaged soft-storey frame was retrofitted with concrete jacketing and, subjected to same earthquake motions as the original frames. Pushover analysis was carried out using the software package SAP 2000 to validate the test results. The performance point was obtained for all the frames under study, therefore the frames were found to be adequate for gravity loads and moderate earthquakes. It was concluded that the global nonlinear seismic response of reinforced concrete frames with masonry infill can be adequately simulated using static nonlinear pushover analysis.