• 대한기계학회논문집B
• /
• 제31권7호
• /
• pp.620-627
• /
• 2007

In this paper, we adapt a modified internal energy non-equilibrium first-order extrapolation thermal boundary condition to the thermal lattice Boltzmann model (TLBM). This model is the double populations approach to simulate hydrodynamic and thermal fields. The bounce-back boundary condition which is a traditional boundary condition of lattice Boltzmann method has only a first order in numerical accuracy at the boundary and numerical instability. A non-equilibrium first-order extrapolation boundary condition has been verified to be of better numerical stability than the bounce-back boundary condition and this boundary condition is proved to be of second-order accuracy for the flat boundaries. The two-dimensional natural convection flow in a square cavity with Pr=0.71 and various Rayleigh numbers are simulated. The results are found to be in good agreement with those of previous studies.

• Journal of Computational Design and Engineering
• /
• 제3권4호
• /
• pp.330-336
• /
• 2016

The present work is concerned with heat and mass transfer of an electrically conducting second grade MHD fluid past a semi-infinite stretching sheet with convective surface heat flux. The analysis accounts for thermophoresis and thermal radiation. A similarity transformations is used to reduce the governing equations into a dimensionless form. The local similarity equations are derived and solved using Nachtsheim-Swigert shooting iteration technique together with Runge-Kutta sixth order integration scheme. Results for various flow characteristics are presented through graphs and tables delineating the effect of various parameters characterizing the flow. Our analysis explores that the rate of heat transfer enhances with increasing the values of the surface convection parameter. Also the fluid velocity and temperature in the boundary layer region rise significantly for increasing the values of thermal radiation parameter.

• 한국항만학회지
• /
• 제8권1호
• /
• pp.41-47
• /
• 1994

The present paper discusses the nonlinear wave deformation due to a submerged coastal structure. Theory is based on the frequency-domain method using the third order perturbation and boundary integral method. Theoretical development to the second order perturbation and boundary integral method. Theoretical development to the second order Stokes wave for a bottom-seated submerged breakwater to the sea floor is newly expanded to the third order for a submerged coastal structure shown in Figure 1. Validity is demonstrated by comparing numerical results with the experimental ones of a rectangular air chamber structure, which has the same dimensions as that of this study. Nonlinear waves become larger and larger with wave propagation above the crown of the structure, and are transmitted to the onshore side of the structure. These characteristics are shown greatly as the increment of Ursell number on the structure. The total water profile depends largely on the phase lag among the first, second and third order component waves.

• 정보처리학회논문지B
• /
• 제13B권3호
• /
• pp.255-274
• /
• 2006

비디오에서 움직이는 객체의 외곽선은 객체를 정확하게 분할하기 위하여 매우 중요하다. 그러나 움직이는 객체의 외곽선에는 단락된 외곽선들이 존재하게 된다. 우리는 단락된 외곽선을 연결할 수 있는 새로운 외곽선 연결 알고리즘을 개발하였다. 외곽선 연결 알고리즘은 단락된 외곽선의 말단 픽셀에 사분면을 형성하고 동심원을 구성하면서 반지름 내에서 다른 말단 픽셀을 찾는 탐색을 전진하면서 수행한다. 외곽선 연결 알고리즘은 객체의 외곽선에서 가장 짧게 외곽선을 연결한다. 그리고 시스템은 비디오로부터 배경을 구하여 저장한다. 시스템은 외곽선 연결로부터 객체 마스크를 생성하고, 배경된 저장으로부터 또 하나의 객체 마스크를 생성하여 이 두 개의 객체 마스크를 보완적으로 사용하여 움직이는 객체를 분할한다. 논문의 주요 장점은 정확한 객체 분할을 위한 새로운 객체 외곽선 연결 알고리즘의 개발이다. 제안된 알고리즘은 개발된 새로운 객체 외곽선 연결 알고리즘과 배경 저장을 이용하여 정확한 객체 분할, 다중 객체 분할, 내부에 구멍이 존재하는 객체의 분할, 가느다란 객체의 분할, 그리고 복잡한 배경을 가진 객체를 자동으로 분할하여 보여주었다. 우리는 알고리즘들을 표준 MPEG-4 실험 영상과 카메라로 입력된 실제 영상을 가지고 실험하였다. 제안된 알고리즘들은 매우 효율이 좋으며 펜티엄-IV 3.4GHz CPU에서 평균적으로 QCIF 영상을 1초당 70.20 프레임 그리고 CIF 영상을 1초당 19.7 프레임을 실시간 객체 응용을 위하여 처리할 수 있다.

• Ocean Systems Engineering
• /
• 제1권4호
• /
• pp.317-336
• /
• 2011

A time domain finite element based method is employed to analyze wave radiation by multiple cylinders. The nonlinear free surface and body surface boundary conditions are satisfied based on the perturbation method up to the second order. The first- and second-order velocity potential problems at each time step are solved through a finite element method (FEM). The matrix equation of the FEM is solved through an iteration and the initial solution is obtained from the result at the previous time step. The three-dimensional (3D) mesh required is generated based on a two-dimensional (2D) hybrid mesh on a horizontal plane and its extension in the vertical direction. The hybrid mesh is generated by combining an unstructured grid away from cylinders and two structured grids near the cylinder and the artificial boundary, respectively. The fluid velocity on the free surface and the cylinder surface are calculated by using a differential method. Results for various configurations including two-cylinder and four-cylinder cases are provided to show the mutual influence due to cylinders on the first and second waves and forces.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.215-220
• /
• 2004

Molecular Dynamics(MD) method was used to investigate the change of friction force due to interaction between dislocations and a grain boundary when a Ni tip was scratched on a Cu bicrystal. The substrate comprised a Cu bicrystal containing a vertical$\Sigma=5(210)$ grain boundary. The moving tip for scratching simulation was consisted of fixed Ni atoms emulating a rigid tip. The indentation depth was $3.6\AA$ and the scratching was performed along <110>direction in the first grain. As the scratching was continued, nucleation and propagation of dislocations were observed. In the early stage, the grain boundary played as a barrier to moving dislocations and interrupting further dislocation movement with no dislocation resulting in no propagation across the grain boundary. As the Ni tip approached the grain boundary, dislocations were nucleated at the grain boundary and propagated to the second grain. However, stick-slip phenomena that were observed on a single crystal scratching were not observed in the bicrystal. And, instead, irregular oscillation of friction force was observed during the scratching due to the presence of a grain boundary.

• 한국해안해양공학회지
• /
• 제5권1호
• /
• pp.39-44
• /
• 1993

본 논문에서는 경계 damper를 이용하여 파낭의 항내 침입으로 인한 수면교난 현상을 예측할 수 있는 유한요소 수치모형에 대해서 연구하였다. 지배방정식으로는 완경사냉정식을 사용하였으며, 고체 경계면에서의 에너지 손실 효과를 고려하기 위하여 부분반사 경계조건을 도입하였다. 방사 경계조건은 Bando 등(1984)이 개발한 2차원 경계 damper로 처리하였다. 항내 영역은 8절점 등매개변수요소를 사용하여 모형화하였으며, 경계면의 경계조건은 3절점 선요소로 처리하였다. 본 수치모형의 검증을 위하여 완전 개방된 직사각형 모형항만에 대해 수치실험을 수행하였다. 또한, 고체 경계면에서의 반사율 변화 및 경계 damper의 종류에 따른 해석도 수행하여 상호 비교하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.78-81
• /
• 1990

The Engquist-Majdas second-order Absorbing Boundary Conditions (ABC) has been combined with the finite element formulation replacing the boundary integral equations in the hybrid finite-boundary element method (HEM). The method is applied to electromagnetic field radiation problems, especially to the microwave launcher, in order to verify the finite element formulation with the ABC's. The results with ABC are in good agreement with those of HEM. In order to see the applicability of the ABC, a simplified microwave oven utilizing ABC and an absorbing material are provided. The EM field distribution of the model is visualized. This method could be a useful analysis and design tool for EM field devices.

• 대한기계학회논문집B
• /
• 제31권8호
• /
• pp.680-687
• /
• 2007

The paper presents a numerical simulation of flow of a turbulent boundary layer, representing a typical wind environment and matching a series of wind tunnel observations. The simulations are carried out at a Reynolds number of 20,000, based on the velocity U at a pseudo-height h, and large enough that the flow be effectively Reynolds number independent. Some wall models are proposed for the LES(Large Eddy Simulation) of the turbulent boundary layer over a rough surface. The Jenson number, $J=h/z_0$, based on the roughness length $z_0$, is 600 to match the wind tunnel data. The computational mesh is uniform with a spacing of h/32, as this aids rapid convergence of the multigrid solver, and the governing equations are discretised using second order finite differences within a parallel multiblock environment. The results presented include the comparison between wind tunnel measurements and LES computations of the turbulent boundary layer over rough surface.

• 한국세라믹학회지
• /
• 제44권12호
• /
• pp.683-689
• /
• 2007

Grain-boundary conduction in the fluorite-structure solid oxide electrolytes such as acceptor-doped zirconia and ceria were reviewed. The siliceous impurity, even several hundreds ppm, affects the ionic conduction across grain boundary to a great extent. Various approaches to improve grain-boundary conduction in fluorite-structure oxide electrolytes have been investigated, which include (1) the scavenging of siliceous phase by the reaction with second phase, (2) the gathering of intergranular siliceous phase into a discrete configuration and (3) the dewetting of intergranular liquid phase by post-sintering heat treatment.