• Journal of Information Processing Systems
• /
• 제12권2호
• /
• pp.310-321
• /
• 2016

TCS_SHA-3 is a family of four cryptographic hash functions that are covered by a United States patent (US 2009/0262925). The digest sizes are 224, 256, 384 and 512 bits. The hash functions use bijective functions in place of the standard compression functions. In this paper we describe first and second preimage attacks on the full hash functions. The second preimage attack requires negligible time and the first preimage attack requires $O(2^{36})$ time. In addition to these attacks, we also present a negligible time second preimage attack on a strengthened variant of the TCS_SHA-3. All the attacks have negligible memory requirements. To the best of our knowledge, there is no prior cryptanalysis of any member of the TCS_SHA-3 family in the literature.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• 제9권2호
• /
• pp.239-248
• /
• 1997

Steady components and unsteady components of second-order velocity and temperature within pulse tube refrigerators were obtained. Second-order solutions were obtained from the first-order solutions of continuity, momentum and energy equations, assuming that the amplitude of the piston motion is small. The axial temperature gradient was considered in the analysis. The flow direction of the streaming was consistent with previous experimental observations. Effects of axial temperature gradient on secondary flow and second-order temperature were shown.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• 제33권5호
• /
• pp.173-180
• /
• 1984

The spectra of scattering light fromlaser-produced plasma near its fundamental and second harmonic wavelength were observed respectively by means of spectroscopic technique. The experimental results and the generation mechanism of nonlinear effects such as the second garmonics and the brillouin scattering were analysed theoretically. The spectra of reflected laser light became wider than that of incident laser light. And the peak of spectrum of reflected light shifted to red-side from that of incident light. The second harmonic light is generated from the nonlinear interaction of the incident laser light and the electron plasma wave excited in resonance region by the oblique incidence of laser light to the plasma. The Brillouin backscattering from laser-produced plasmas of hydrogen and deuterium has shown an isotope effect in the red-side region of the generated second harmonic light. This isotope shift is explained by the parametric instability at the cutoff (resonance) region using frequency-and phase-matching conditions of the waves.

• Journal of electromagnetic engineering and science
• /
• 제8권3호
• /
• pp.134-137
• /
• 2008

This paper proposes a novel quadrature VCO(QVCO) based on direct back-gate second harmonic coupling. The QVCO directly couples the current sources of the conventional LC VCOs through the back-gate instead of front-gate to generate quadrature signals. By the second harmonic injection locking, the two LC VCOs can generate quadrature signals without using on-chip transformer, or stability problem that is inherent in the direct front-gate second harmonic coupling. The proposed QVCO is implemented in $0.18{\mu}m$ CMOS technology operating at 2 GHz with 5.0 mA core current consumption from 1.8 V power supply. The measured phase noise of the proposed QVCO is - 63 dBc/Hz at 10 kHz offset, -95 dBc/Hz at 100 kHz offset, and -116 dBc/Hz at 1 MHz offset from the 2 GHz output frequency, respectively. The calculated figure of merit(FOM) is about -174 dBc/Hz at 1 MHz offset. The measured image band rejection is 46 dB which corresponds to the phase error of $0.6^{\circ}$.

• Journal of applied mathematics & informatics
• /
• 제26권1_2호
• /
• pp.45-60
• /
• 2008

Here we consider the evaluation of the the dynamic component of the second order force due to wave diffraction by a circular cylinder analytically and numerically. The cylinder is fixed, vertical, surface piercing in water of finite uniform depth. The formulation of the wave-structure interaction is based on the assumption of a homogeneous, ideal, incompressible, and inviscid fluid. The nonlinearity in the wave-structure interaction problem arises from the free surface boundary conditions, namely, dynamic and kinematic free surface boundary conditions. We expand the velocity potential and free surface elevation functions in terms of a small parameter and then consider the second order diffraction problem. After deriving the pressure using Bernoulli's equation, we obtain the analytical expression for the dynamic component of the second order force on the cylinder by integrating the pressure over the wetted surface. The computation of the dynamic force component requires only the first order velocity potential. Numerical results for the dynamic force component are presented.

• Transactions of the Korean Society of Automotive Engineers
• /
• 제17권5호
• /
• pp.7-15
• /
• 2009

This paper introduces a new variable valve actuation mechanism with movable second cam center. Valve lift and open duration can be continuously varied according to engine speed and load conditions. A new method to analyze the kinematic relations between the first and second cam profiles and valve motion are also introduced. Because of rocker motion of the second cam, conventional motion conversion program could not be used in this problem. An example shows continuous variations of valve motion and adequate ramp incorporation throughout all valve lift modes. Valve acceleration profile at the high lift mode is similar to that of conventional valvetrains. Contact geometry analysis of the mechanism gives basic information on the load conditions between the components.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1179-1180
• /
• 2005

3D micro scaled shapes are fabricated with the method of direct writing and superposing grooving in ambient air using femto-second laser pulses and copper, aiming at establishing an industrially useful femto-second laser processing machine to be able to fabricate three dimensional micro-scale structures, especially micro scaled molds, and processing techniques. For the several advantages, there is no thermally influenced region around the area irradiated by the laser beam and surfaces irradiated laser beam are smooth and substances ablated to form are no attached on the surface of works and so on, the femto-second laser technology is anticipated for advanced micro/nano precision technology.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제26권6호
• /
• pp.1-7
• /
• 2012

Recently an optical diffusion of LED lamps has been studied actively. In this paper, the second lens applied to a cover of the LED lamp was analytically designed to having a wide angle distribution of light without diffuser characteristic by dispersing agent. In this process, We found a major factors that can help improve the performance of the lens. It is the refractive power of the lens, the Mie particle density of phosphor, and the arrangement of the LED. Through the final simulation, we can see the LED lamp is possible to get wide angle light distribution by proper source modeling and second lens designing. Also, we can see this simulated results are entirely consistent with measured data for light distribution. In this research, we present the shape of the second lens with wide angle distribution and derive the important factors for the second lens design.

• Bulletin of the Korean Mathematical Society
• /
• 제45권1호
• /
• pp.75-93
• /
• 2008

The rate of convergence of the distribution of order statistics to the corresponding extreme-value distribution may be characterized by the uniform and total variation metrics. de Haan and Resnick [4] derived the convergence rate when the second order generalized regularly varying function has second order derivatives. In this paper, based on the properties of the generalized regular variation and the second order generalized variation and characterized by uniform and total variation metrics, the convergence rates of the distribution of the largest order statistic are obtained under weaker conditions.

• Korean Journal of Bronchoesophagology
• /
• 제2권2호
• /
• pp.222-226
• /
• 1996

The increasing incidence of multiple primary carcinomas occuring in the upper aerodigestive tract is well documented, with the accepted incidence being as high as 20-30%. The fiberoptic endoscopy has also enabled visualization of areas previously inaccessible without general anesthesia. A prospective panendoscopic examination of the upper aerodigestive tract was peformed on 104 patients with squamous cell carcinoma of head & neck in our hospital between 1989 and 1994. Five second primary cancers (4.8% ：2 stomach, 2 esophagus, 1 lung cancers) were detected endoscopically. These finding should reinforce the belief that head & neck cancer is a panmucosal disease of the aerodigestive tract that silent second primary cancers are not uncommon. So every effort should be done to detect second primary cancers in head & neck squamous cell carcinomas. Panendoscopy has proved valuable in achieving that.