• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.475-478
• /
• 2006

Total primary production resulting from the photosynthetic process can be defined as the amount of organic matter produced in a given period of time. It is proportional to the chlorophyll-a (chl-a) values in the surface layer of the ocean. The MODIS board on Aqua satellite measures visible and infrared radiation in 36 wavebands, providing simultaneous images of chl-a concentration and sea surface temperature (SST) in the upper layer of the sea. The seasonal distribution of chl-a concentration during one year from April 2005 to March 2006 was examined. Light has a role of starting the seasonal cycle. The Kuroshio Current in this area induces many oceanographical features affecting to the change of seasonal control. The chl-a concentration is also seasonal, which is low in summer and high in winter. In summer, the meandering of Kuroshio Current induces strong eddies and increases the chl-a concentration. In autumn, the delayed small autumn bloom occurred until last December due to the Kuroshio Current. When the Kuroshio axis moves far from the coast, the coastal water dominates and increases the concentration even in the winter. The spring bloom starts early at the beginning of March and decreases during the spring.

• Fisheries and Aquatic Sciences
• /
• 제3권2호
• /
• pp.143-150
• /
• 2000

Assuming that summer surface waters in the South Sea (northern East China Sea) are formed mostly by a mixing of three source water (Changjiang Discharge Water; Kuroshio Water and Yellow Sea Surface Water) we apply optimum multiparameter (OMP) analysis to calculate the mixing ratio of each source water to a given surface water. Since OMP requires more parameters than the number of water types (three in this study), we utilize two radium isotopes of dissolved $^{226}Ra\;and\;^{228}Ra$ along with temperature and salinity. Parameter values of each source water are deduced from in situ and historical data. Results with three source of waters on the surface waters are quite promising with less than $1\%$ of unanswered portions. Results not only reproduce the measured temperature and salinity faithfully but also discern the water masses of similar T and S according to their source water mixing. Extending OMP analysis to a whole water column obviously requires more parameters because more source waters are involved in the water mass formation. Original OMP routine utilized dissolved oxygen and nutrients. However, they seem to be perturbed too much by biological activities in the case of shallow waters. We discussed the use of other potential parameters. Also the benefit of parameter substitution is briefly introduced for the future OMP application on shallow waters.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.74-79
• /
• 2011

This study was accomplished to evaluate the performance of Multi Effect Distillation(MED) for solar thermal desalination system. It was designed Multi effect distillation with $3m^3/day$ capacity and Shell&Tube type heat exchanger. Also, The effective heat transfer of Shell&Tube heat exchanger was used Cu(90%)-Ni(10%) corrugated tube. The parameters relating to the performance of Multi Effect Distillation are known as hot water flow rate. The experimental conditions for each parameters were $18^{\circ}C$ for sea water inlet temperature, $6m^3/hour$ sea water inlet volume flow rate, $75^{\circ}C$ for hot water inlet temperature, 2.4, 3.6, and $4.8m^3/hour$ for hot water inlet volume flow rate, respectively. The results are as follows, Development for Multi effect distillation was required about 40kW heat and 35kW cooling source to produce $3m^3/day$ of fresh water. And, Performance ratio of Development Multi effect distillation was about 2.0191.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.429-432
• /
• 2008

Large area members such as foundation concrete of underground structures in power plants have an effect on structural stability and durability of the structure due to danger of crack occurrence and shrinkage crack that occur owing to the difference of temperature by heat of hydration between inside and outside of the members at initial age. And a construction for waterproofness is performed additionally to protect marine structures from osmosis of seawater because the structures adjoin below the surface of sea. So, if a rise of the heat of hydration, crack, and corrosion of bars are controled effectively using a composite such as fluosilicate salt in concrete production process of a initial construction, expenses are cut down and construction hours are reduced by securing durability through improvement of watertightness. The property tests of adiabatic temperature by hydration are carried out at initial age about standard concrete and test concrete using a fluosilicate salt composite to evaluate an effect on improvement of watertightness for concrete structures in this study. And the experiments such as a permeability test of hardened concrete, a water absorption test, a compression strength test and a elongation test are carried out and the results from these are described.

• 수산해양교육연구
• /
• 제27권3호
• /
• pp.747-756
• /
• 2015

Brown alga Undaria peterseniana has been interested in the commercial scale aquaculture for warm water species development in southern coastal area of Korea. However, this species was classified an endangered species caused by a decrease in habitat and natural population. In this study, inhabit characteristics of U. peterseniana was investigated in their natural habitat of Ulleung Island, Korea. The U. peterseniana population was occurred dense patches at 20~30m depth. Total length of the alga reached 1.0~2.0m and the largest width ranged 10.0~35.0cm during the study. In 2013, habitats of this species increased two sites compared with the previous year and their distribution extended to low depth (10m) of coastal area. In long-term data, seawater temperature revealed a continuous increment by strong going north of East Korea Warm Current or Ulleung Warm Eddy turning around the coast of Ulleung Island. It suggested that habitat extension of U. peterseniana may be caused by suitable settlement condition and increase of warm water around the coastal area. Current studies of this species may be continuously required in the possibility of fisheries resources as aquaculture species and index species of increment of water temperature at the fixed monitoring site in East Sea. This is the first study to research ecological feature U. peterseniana population at the natural habitat of Ulleung Island.

• 태양에너지
• /
• 제18권4호
• /
• pp.1-10
• /
• 1998

Polymer induced turbulent drag reduction in a rotating disk apparatus was investigated using four different molecular weights of poly(ethylene oxide)(PEO) in a synthetic seawater solution for the purpose of potential application to the cold water piping in the Ocean Thermal Energy Conversion(OTEC) system. To apply drag reduction to the OTEC we measured the temperature dependence on the drag reduction efficiency. From this study, it was found that the drag reduction efficiency increases with the temperature and the concentration. To measure the drag reduction efficiency during the operation period, the drag reduction behavior was detected as a function of time and the results obtained from the experiment was compared to the Brostow's model equation.

• KEPCO Journal on Electric Power and Energy
• /
• 제5권3호
• /
• pp.215-222
• /
• 2019

This work is experimental study of 10 kW specialized Combined Ocean Thermal Energy Conversion. We propose a C-OTEC technology that directly uses exhaust thermal energy from power station condensers to heat the working fluid (R134a), and tests the feasibility of such power station by designing, manufacturing, installing, and operating a 10 kW-pilot facility. Power generation status was monitored by using exhaust thermal energy from an existing power plant located on the east coast of the Korean peninsula, heat exchange with 300 kW of heat capacity, and a turbine, which can exceed enthalpy efficiency of 45%. Output of 8.5 kW at efficiency of 3.5% was monitored when the condenser temperature and seawater temperature are $29^{\circ}C$ and $7.5^{\circ}C$, respectively. The evaluation of the impact of large-capacity C-OTEC technology on power station confirmed the increased value of the technology on existing power generating equipment by improving output value and reducing hot waste water. Through the research result, the technical possibility of C-OTEC has been confirmed, and it is being conducted at 200 kW-class to gain economic feasibility. Based on the results, authors present an empirical study result on the 200 kW C-OTEC design and review the impact on power plant.

• Corrosion Science and Technology
• /
• 제20권6호
• /
• pp.403-411
• /
• 2021

In this study, the reliability of a commercial ER-type corrosion sensor was evaluated under an accelerated corrosion environment to verify its suitability for application in monitoring of ship's seawater piping system. A closed-loop pump piping testbed was designed and constructed to compare the wall thickness reduction of the pipe and the response from the sensor. The sensor was attached inside the pipe near the outlet of the pump that was exposed to a 3.5% NaCl solution with or without copper accelerated acetic acid (CASS). The results demonstrated that the presence of CASS significantly increased the corrosivity of the solution as well as the thickness reduction of the pipe, as expected. On the other hand, the corrosion products formed by the solution with CASS were thicker compared with those without CASS. The sensor response to temperature variation was found to be a clear linear relationship for the solution without CASS but there was a non-linear relationship where CASS was present.

• 한국해양환경ㆍ에너지학회지
• /
• 제17권1호
• /
• pp.27-35
• /
• 2014

해수 내 유류계 방향족탄화수소인 BTEX(benzene, toluene, ethylbenzene, xylene)와 다환방향족탄화수소(polycyclic aromatic hydrocarbons: PAHs)를 동시에 분석할 수 있는 기술 개발을 위해 GC/MS에서 고체상미량추출법(solid phase microextraction: SPME)을 이용하여 최적의 분석기법을 정립하였다. SPME 기법은 전통의 분석 방법과 비교할 때 조작이 간단하고, 파이버를 재사용할 수 있고, 휴대하기 쉽고, 시료의 운반이나 저장하는 동안 오염을 최소화 할 수 있는 장점이 있다. 최적의 SPME 조건을 정립하기 위해 여러 변수 즉, SPME 수착제, 흡착 시간, 흡착 온도, 교반 속도, GC 탈착 시간들을 확인하였다. 다양한 SPME 수착제($100{\mu}m$ PDMS, $75{\mu}m$ CAR/PDMS, $65{\mu}m$ PDMS/DVB)를 이용하여 BTEX와 PAHs(분자량 78부터 202까지)를 동시에 분석한 결과 $65{\mu}m$ PDMS/DVB를 최적의 수착제로 선정하였다. 최적의 수착제로 $65{\mu}m$ PDMS/DVB 선정한 다음 순차적으로 다른 변수들을 확인하였다. 그 결과 BTEX와 PAHs 동시 분석하기 위한 최적의 SPMD 조건은 흡착시간 60분, 흡착온도 $50^{\circ}C$, 교반속도 750 rpm, GC 탈착시간 3분으로 결정되었다. 최적화한 HS-SPME-GC/MS 분석법을 이용하여 인공오염해수 내 유류계 방향족탄화수소 분석 결과 이전 연구 방법과 유사하였다. HP-SPME-GC/MS 분석법은 기존에 유기용매를 사용한 방법이 가졌던 단점과 제한점을 보완할 수 있으며, 해수 내 유류에 의한 BTEX 및 PAHs 분석에 효율적으로 적용할 수 있다.

• 한국해양학회지:바다
• /
• 제5권4호
• /
• pp.363-373
• /
• 2000

남서태평양 열수해역의 화학적 환경특성을 이해하기 위하여 수온, 염분, 투명도, pH, 영양염 및 황화수소 등을 분석하였다. 시료는 마누스분지의 12개 정점에서 CTD를 이용하여 채취하였다. 열수작용은 해수 및 암석간의 순환작용에 의해 이들의 물리, 화학적 특성을 변화시키고, 주변의 해수와는 특성이 다른 열수가 plume을 형성하여 해양으로 공급된다. 본 연구에서는 남서태평양 PACMANUS 해역과 Susu Knolls 해역에서 투명도 및 황화수소를 이용하여 열수작용에 의한 plume을 확인하였다 특히, 열수환경을 지시하는 지화학적 추적자인 황화수소는 0${\sim}$3.31 ${\mu}$M 범위와 평균 0.63${\mu}$M을 보였다. 열수작용에 의한 plume의 높이, 분출량 및 활동도는 저층해류 순환 등의 영향을 받으며 수층의 등밀도면을 따라 주변 해수로 확산된다. 결과적으로 연구 해역에서의 황화수소 농도 이상치는 열수작용에 의한 영향으로 판단되고, 따라서 PACMANUS 해역의 남북방향에 가장 큰 공급원이 있을 것으로 보인다.