• 제목/요약/키워드: sealant failure

검색결과 17건 처리시간 0.03초

아스팔트 콘크리트 포장용 균열실링재의 부착특성 평가 (Evaluation of Adhesion Characteristics of Crack Sealants Used in Asphalt Concrete Pavement)

  • 이재준;김승훈;백종은;임재규;김용주
    • 한국도로학회논문집
    • /
    • 제17권2호
    • /
    • pp.55-62
    • /
    • 2015
  • Cracking is an inevitable fact of asphalt concrete pavements and plays a major role in pavement deterioration. Pavement cracking is one of the main factors determining the frequency and method of repair. Cracks can be treated with a number of preventative maintenance actions, including overlay surface treatments such as slurry sealing, crack sealing, or crack filling. Pavement cracks can show up as one or all of the following types: transverse, longitudinal, fatigue, block, reflective, edge, and slippage. Crack sealing is a frequently used pavement maintenance treatment because it significantly extends the pavement service life. However, crack sealant often fails prematurely due to a loss of adhesion. Because current test methods are mostly empirical and only provide a qualitative measure of the bond strength, they cannot accurately predict the adhesive failure of the sealant. This study introduces a laboratory test aimed at assessing the bonding of hot-poured crack sealant to the walls of pavement cracks. A pneumatic adhesion tensile testing instrument (PATTI) was adopted to measure the bonding strength of the hot-poured crack sealant as a function of the curing time and temperature. Based on a limited number of test results, the hot-poured crack sealants have very different bonding performances. Therefore, this test method can be proposed as part of a newly developed performance-based standard specification for hot-poured crack sealants for use in the future. PURPOSES : The purpose of this study was to evaluate both the adhesion and failure performance of a crack sealant as a function of its curing time and curing temperature. METHODS: A pneumatic adhesion tensile testing instrument (PATTI) was adopted to measure the adhesion performance of a crack sealant as a function of the curing time and curing temperature. RESULTS: With changes in the curing time, curing temperature, and sealant type, the bond strengths were found to be significantly different. Also, higher bond strengths were measured at lower temperatures. Different sealant types produced completely different bond strengths and failure behaviors. CONCLUSIONS: The bonding strength of an evaluated crack sealant was shown to differ depending on various factors. Two sealant types, which were composed of different raw materials, were shown to perform differently. The newly proposed test offers the possibility of evaluating and differentiating between different crack sealants. Based on alimited number of test results, this test method can be proposed as part of a newly developed performance-based standard specification for crack sealants or as part of a guideline for the selection of hot-poured crack sealant in the future.

방균실란트의 방균지속성 평가 (Antifungal Durability Evaluation of Sanitary Sealant)

  • 서연원;정진영;안명수;김성현;배기선
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2014년도 추계 학술논문 발표대회
    • /
    • pp.65-67
    • /
    • 2014
  • There are many elastomeric joint sealant applications in construction such as structural glazing, weatherproofing and insulating glass fabrication etc. Each sealant joints require unique durability functions to perform well through building life cycle. Elastomeric joints in bathroom and kitchen is one of areas which require durable sealing. In this application, anti fungal durability is proprietary function of sealant during building life cycle. Premature failure of anti fungus resistance of sealant is putting big stresses to general contractor as well as the inhabitants due to costly rework and poor sanitation. Accordingly, when chemists design a product, they must take into account various parameters not only formulation components also test conditions in order to have long term fungal durability. This paper reviews several biocide options with various industry standards for fungus resistance performance to suggest making new test method for construction sealant industry.

  • PDF

전륜구동 수동변속기에 대한 트라이볼로지적 고장사례 연구 (Tribological Failure Study of Manual Transmissions in Front Engine and Front Wheel Drive Vehicle)

  • 김청균;이일권
    • Tribology and Lubricants
    • /
    • 제24권6호
    • /
    • pp.285-290
    • /
    • 2008
  • The purpose of this paper is to present the case study of tribological failure analysis on the gear damages, oil leakage, and sealant sealing in a manual transmission of front engine and front wheel drive vehicle. The manual transmission is to change the speed range and direction of the engines depending on the driving conditions by friction driving forces with input and output gear system. The material property and surface roughness of the gears are strongly related to the gear noise and micro-vibration, oil leakage and wear, which may decrease the real contact area of the gear and the strength of the oil film thickness between the driving gear and driven one. The O-ring damage of speedometer driven gear and bad sealant sealing of oil pan may produce oil leakage through the contact surfaces, which cause the oil shortage and seizure on the sliding surfaces of the transaxle gears. In the failure case study, the proper repair working and good lubrication are very important for the long life of the transaxle without any tribological failures and oil leakage.

치면건조제와 접착제의 사용에 따른 치면열구전색재의 전단결합강도에 관한 연구 (THE EFFECTS OF DRYING AGENTS AND BONDING AGENTS ON THE SHEAR BOND STRENGTH OF SEALANTS TO ENAMEL)

  • 임현화;장기택;김종철;한세현
    • 대한소아치과학회지
    • /
    • 제30권2호
    • /
    • pp.196-203
    • /
    • 2003
  • 전색재의 적용은 기술에 매우 민감한 술식으로써 도포 전에 치면의 완전한 건조를 요구한다. 전색재 실패의 여러 요인 중 가장 주된 원인으로는 산부식 후 전색재 도포 전의 수분 또는 타액에 의한 오염인 것으로 인정되고 있다. 본 연구는 기존의 산부식만을 해오던 술식과 수분오염의 극복을 위해 변형된 술식이 전색재의 유지력에 미치는 효과를 전단결합강도를 측정하여 비교하고자 하였다. 1, 2, 3, 4군은 unfilled sealant인 Teethmate-F를, 5, 6, 7, 8군은 filled sealant인 Ultraseal XT plus를 사용하였다. 대조군인 1군과 5군은 35% 인산으로 15초간 산부식과 세척 후 건조시켰다. 2군과 6군은 여기에 치면건조제를 도포하였고, 3군과 7군에는 접착제를 도포하고 광중합하였다. 4군과 8군은 치면건조제와 접착제를 둘 다 도포하였다. 이후 직경 3mm, 높이 2mm의 몰드를 이용하여 전색재를 접착시키고 열순환을 시행한 다음 전단결합강도를 측정하여 다음의 결과를 얻었다. 1. filled sealant(5, 6, 7, 8군)에서 전단결합강도는 unfilled sealant(1, 2, 3, 4군)에 비해 각각 유의성 있게 높은 값을 보였다(p<0.05). 2. unfilled sealant에서는 산부식 처리만 한 1군에 비해 2, 3, 4군은 유의성 있게 전단결합강도가 증가하였으며(p<0.05), 2, 3, 4군 간에는 유의한 차이를 나타내지 않았다. 3. filled sealant에서는 산부식 처리만 한 5군에 비해 6, 7, 8군의 전단결합강도가 증가하였으나 유의성 있는 차이를 보이지 않았다. 그리고 6, 7, 8군 간에도 유의한 차이는 없었다. 4. 파절면 검사결과 ailed sealant 군에서는 응집성 파절이 관찰되지 않았으나, unfilled sealant 군에서는 2, 3, 4군에서 응집성 파절이 나타났다.를 보였으며 복합 레진은 유의차가 없었다. 상악 견치 (8%), 하악 제 1소구치 (5%) 순이었다. 10. I군에서 추정되는 낭의 발생 원인으로는 치수절단술을 받은 유치가 59.2%로 가장 많았고 이외에 심한 우식 및 치료 받지 않은 외상 병력등 기타 가능한 원인들이 있었다. 11.함치성 낭의 치료법으로는 I군의 경우 61.2%에서 조대술이 시행되었고, II군과 III군의 경우 61.1%, 80.0%에서 적출술이 시행되었다.mH I처치시 SM1과 SM2는 4조각의 절편으로 절단되어 같은 양상을 보였고, GS톤의 경우는 3조각의 절편으로 절단되었다. Kpn I, Sma I, Xho I 그리고 Pst I에는 절단되지 않았다.s subsp. salicinius와 유전자 유사치가 99.60%, 99.73%를 보여 Lactobacillus salivarius subsp. salicinius로 동정되었다. 이상의 결과를 종합하면 치아우식증이 없는 소아의 타액에서 분리된 유산균 중 과산화수소를 분비하여 인공치태 형성과 휘발성 유황화합물 생성을 억제하는 분리균주는 Lactobacillus salivarius subsp. salicinius로 동정되었다.적으로 낮은 수축률과 우수한 물성을 보였으며, 나노필러를 사용한 복합레진의 경우, 기존의 hybrid 필러를 이용한 레진에 비하여 수축응력을 감소시키지는 못하였다. 나노필러를 이용한 복합레진은 개발의 초기단계이며, 물성의 증가를 위한 연구가 필요할 것으로 사료된다.또 다른 약물인 glycyrrhetinic acid($100{\mu}M$)도 CCh 자극으로 인한 타액분비를 억제하였다. 이상의 결과로 미루어 gap junction은 흰쥐 악하선 세포로부터의 타액분비 조절에 중요한 역할을 하는데, 이는 gap junction이 세포막 $Ca^{2+}$ 통로를 조절함으로써 수용체 자극으로 유발된 세포내

  • PDF

불소함유여부에 따른 치면열구전색제의 전단결합강도에 관한 실험적 연구 (An Experimental Study on the Shear Bond Strength of Fluoride-Containing Sealant and Non-Fluoride Containing Sealant)

  • 허선;권선자;김재곤;백병주
    • 대한소아치과학회지
    • /
    • 제23권2호
    • /
    • pp.489-501
    • /
    • 1996
  • This study was to evaluate shear bond strength of fluoride-releasing sealant and nonfluoride releasing sealant to enamel surface of bovine tooth. 80 extracted bovine teeth were randomly assigned to four groups, and four kinds of sealants including Teethmate-A(Kuraray Co.), Teethmate-F(Kuraray Co.), Helioseal(Vivadent Co.), Helioseal-F(Vivadent Co.) were bonded to exposed enamel surfaces using silicon plate. Shear bond strength was determined in an instron universal testing machine at a crosshead speed of 1mm/min. Then, the fracture surfaces of test specimens were investigated with scanning electron microscope. The obtained results were as follows; 1. The shear bond strength decreased in the following order : Teethmate-A(18.31MPa), Teethmate-F(11.90MPa), Helioseal (11.74 MPa), Helioseal-F(10.64MPa). 2. The shear bond strength of Teethmate-A showed significantly higher than that of Teethmate-F(P<0.05), but Helioseal and Helioseal-F didn't showed statistically different(P<0.05). 3. According to the SEM, Teethmate-A group showed cohesive failure, and Teethmate-A group & Helioseal group showed mixed pattern of cohesive and adhesive failure and Helioseal-F group showed adhesive failure.

  • PDF

탄산가스 레이저 조사가 법랑질 표면구조와 치면열구 전색재의 결합강도에 미치는 효과 (THE EFFECT OF $CO_2$ LASER IRRADIATION ON ENAMEL SURFACE AND THE BOND STRENGTH OF SEALANT MATERIAL)

  • 윤동식;김용기;김종수
    • 대한소아치과학회지
    • /
    • 제25권4호
    • /
    • pp.761-771
    • /
    • 1998
  • In this study, attempt has been made to evaluate the effect of $CO_2$ laser irradiation on enamel surface structure and the bond strength of sealant material. Conventional acid etching was used as a control technic for comparison. The results obtained from this experiment were as follows; 1. The highest mean shear bond strength value was observed in samples of Group I (acid-etching) with the statistical significance(p<.05) between all the other groups. 2. The shear bond strength in Group IV was the lowest among laser etching groups. but there were no significant difference between them(p>.05). 3. Scanning electron microscopic observation showed that the rough and irregular surface was created by $CO_2$ laser treatment with the formation of numerous pores, micro-cracks, and small bubble-like inclusion. Increasing the energy density induced localized surface melt with a thin smooth glaze-like appearance. 4. In acid-etched control specimen cohesive failure predominated, whereas adhesive failure was the main mode in laser-treated group. Based upon the above-mentioned results, it can be assumed that the $CO_2$ laser is not an adequate substitute for the acid-etch technique in enamel preconditioning. More studies are required to explore the effective condition of laser irradiation which could attain the better bond strength of restorative materials.

  • PDF

도로용 줄눈재의 내구성 평가 (Evaluation of Endurance for Roadway Sealant)

  • 이형욱;김승진
    • 한국도로학회논문집
    • /
    • 제11권2호
    • /
    • pp.133-139
    • /
    • 2009
  • 콘크리트 도로에서 줄눈의 역할은 계절적 온도변화에 따라 콘크리트 슬래브의 수축과 팽창 시 적절한 공간을 확보하여 파손과 균열을 보호하는 역할을 하게 된다. 이때 줄눈 부위를 줄눈재로 채워 넣어 이물질이 침투하여 슬래브의 움직임을 방해하거나 파손시키는 것으로부터 보호하는 역할과 강우나 강설 등에 의한 수분이 포장 내부로 침투하여 동결융해에 의한 내부균열 방지 및 다웰바 등을 부식시키는 것을 막는 역할을 수행하여 도로의 공용성을 향상시키는 역할을 하게 된다. 본 연구에서는 콘크리트 도로 줄눈에서 시공된지 2년 경과한 시료를 채취하여 열화를 겪지 않은 초기시료와의 물리적 강도, 내후성, 제설제 저항성 등으로 평가하였으며 실리콘 소재 대비 내후성과 접착성에 큰 차이가 발생하는 것을 확인하였다.

  • PDF

1성분형 실리콘계 실리콘의 열 열화에 대한 인장 성능 평가 (Tensile Properties of One-component Silicon Sealants by Heat Deterioration)

  • 이준;미야우치 히로유키;구경모;최경철;윤민호;미야우치 카오리
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2013년도 추계 학술논문 발표대회
    • /
    • pp.173-174
    • /
    • 2013
  • In this study, the tensile properties of sealants by heat deterioration were measured and analysed to gather the basic data of sealant because these studies do not have been investigated in Korea. Most general one-component silicone sealants were used and test specimen was I-type. The test parameters are sealant types which have different density and heat deterioration time in 80℃. As a result, the rat of reduction in area by heat deterioration was considerable increased at SR-A compared with SR-B. The tensile properties by heat deterioration decreased at SR-A because the specimen by deterioration occurred adhesive failure before tensile test. However, SR-B specimen was increased at maximum tensile stress but decreased at elongation in maximum tensile stress. Also, Maximum principal stress was measured at the edge of specimen by FEM simulation in order to find out failure points.

  • PDF

LTPP Data를 이용한 확률론적 줄눈폭 예측 모델 개발 (Development of a Probabilistic Joint Opening Model using the LTPP Data)

  • 이승우;전성재;정진훈
    • 대한토목학회논문집
    • /
    • 제26권4D호
    • /
    • pp.593-600
    • /
    • 2006
  • 줄눈 콘크리트포장의 줄눈폭의 크기는 인접한 슬래브의 온습도 변화에 따른 체적변형에 기인하여 발생하고 인접 슬래브 간 하중 전달율에 영향을 미치며 줄눈채움재의 설계를 위한 중요한 인자이다. 슬래브의 온도가 하강하거나 습도가 감소하면 줄눈폭은 증가며 일반적으로 최대 줄눈폭은 AASHTO Guide에서 제안된 식을 사용하여 예측하고 있다. 동일한 포장 구역 내에서도 각각의 줄눈별로 발생되는 줄눈폭의 크기가 상당한 차이를 보이고 있는 반면, AASHTO 줄눈폭 예측식은 동일 포장 구역 내에서는 각 줄눈들에서 동일한 줄눈폭이 발생한다는 가정을 갖고 개발되었다. 이러한 가정은 AASHTO 줄눈폭 예측식이 임의 포장구역 내에서의 줄눈폭의 평균값에 대한 예측만을 가능하게 하여 상당부분의 줄눈에 대해서는 과소평가를 초래한다는 단점을 갖게 한다. 이로인해 최대 줄눈폭이 과소평가된 줄눈에서는 줄눈채움재가 조기파손하고, 하중 전달율이 불량하여 단차가 발생할 소지가 높고, 수분의 하부침투 및 세골제등이 줄눈폭 사이에 침입하여 스폴링을 유발할 가능성이 높아진다. 이러한 파손들은 포장 설계시 고려되지 않기 때문에 계획된 포장 수명이 도달하기 전에 포장공용성이 저하되게 한다는 문제점이 있다. 본 연구에선 다양한 줄눈콘크리트포장의 줄눈폭 모니터링 데이터를 포함하고 있는 LTPP SMP Data를 이용하여 임의 포장 내에서의 최대 줄눈폭의 크기가 어떤 분포양상을 나타내는지 고찰하고 줄눈폭이 과소평가되는 비율을 포장설계자가 선택할 수 있도록 하는 확률론적 줄눈폭 예측 모델을 개발하였다.

파손된 치면열구전색제의 수리 방법에 따른 미세누출 비교 (COMPARISON OF MICROLEAKAGE IN SEALANT REPAIRED WITH DIFFERENT SURFACE TREATMENT)

  • 강명봉;현홍근;김영재;김정욱;장기택;이상훈;한세현;김종철
    • 대한소아치과학회지
    • /
    • 제34권2호
    • /
    • pp.204-214
    • /
    • 2007
  • 치면열구전색은 수 십년간 교합면 우식의 예방에 가장 효과적인 방법 중 한가지로 알려져 왔다. 하지만 치면열구전색제의 마모와 파절 때문에 치면열구전색제의 재시술 또는 수리를 필요로 하게 되었다. 본 연구의 목적은 파손된 치면열구전색제를 수리할 때 치질과 잔여 전색제의 표면처리 방법에 따른 미세누출 차이를 알아보고자 하는 것이다. 120개의 영구 대구치에 치면열구전색제를 적용하고 인위적인 파손을 만든 뒤 인공타액에 4주동안 보관하였다. 4주 후 근심 또는 원심의 치면열구전색제가 완전히 파손 양상을 나타내는 치아 60개를 선택하여 각각 15개씩 4개 군으로 나누어 실험에 사용하였다. 각 군을 산부식만 시행한 경우(1군), air-abrasion만 시행한 경우(2군), 산부식 후 결합제를 적용한 경우(3군), air-abrasion 후 결합제를 적용한 경우(4군)로 나눠 각각의 치아를 표면처리한 후 치면열구전색제를 도포하였다. 고온$(55^{\circ}C)$과 저온$(5^{\circ}C)$에서 각각 30초씩 500회의 열순환을 시행한 뒤 미세누출도를 검사하여 다음과 같은 결과를 얻었다. 1. 치면열구전색제/치면열구전색제 경계면에서 미세누출도는 결합제 사용 유무에 관계없이 air-abrasion을 처리한 2군, 4군에서 산부식을 사용한 1군, 3군보다 낮은 값을 보였고(p<0.05) 1군과 2군, 3군과 4군 사이에는 통계적 유의차가 없었다(p>0.05). 2. 치면열구전색제/치아 경계면에서 미세누출도는 결합제를 사용한 3군, 4군에서 결합제를 사용하지 않은 1군, 2군보다 낮은 값을 보였고(p<0.05) 산부식을 사용한 1, 3군과 air-abrasion을 사용한 2, 4군 사이에는 통계적 유의차가 없었다(p>0.05). 3. SEM 상에서 치면열구전색제를 산부식 처리하였을 때 표면거칠기의 증가가 적었으나 air-abrasion 하였을 경우 표면거칠기가 현저하게 증가하는 것을 관찰하였다.

  • PDF