Evaluation of Endurance for Roadway Sealant

도로용 줄눈재의 내구성 평가

  • 이형욱 (한국건자재시험연구원 신뢰성평가센터) ;
  • 김승진 (한국건자재시험연구원 신뢰성평가센터)
  • Published : 2009.06.15

Abstract

Joints on concrete road prevent failure and crack securing the moderate space when concrete slab expands and contracts as a function of varying temperature throughout all seasons. Filling joint sealants in joints can prevent the interruption of slab movement and failure due to the infiltration of alien substances, and also can prevent crack caused by freezing and thawing and Dowel bar corrosion resulted from water - rainfall and snowfall infiltration through the inside the pavement. They lead to the improvement of the commonality of road. This paper evaluates physical strength, weatherability and deicer resistance of a two-year aged sample from joint on concrete road and its virgin sample. It was found that there are significant differences in aspects of weatherability and adhesive force between the tested sample and silicon materials.

콘크리트 도로에서 줄눈의 역할은 계절적 온도변화에 따라 콘크리트 슬래브의 수축과 팽창 시 적절한 공간을 확보하여 파손과 균열을 보호하는 역할을 하게 된다. 이때 줄눈 부위를 줄눈재로 채워 넣어 이물질이 침투하여 슬래브의 움직임을 방해하거나 파손시키는 것으로부터 보호하는 역할과 강우나 강설 등에 의한 수분이 포장 내부로 침투하여 동결융해에 의한 내부균열 방지 및 다웰바 등을 부식시키는 것을 막는 역할을 수행하여 도로의 공용성을 향상시키는 역할을 하게 된다. 본 연구에서는 콘크리트 도로 줄눈에서 시공된지 2년 경과한 시료를 채취하여 열화를 겪지 않은 초기시료와의 물리적 강도, 내후성, 제설제 저항성 등으로 평가하였으며 실리콘 소재 대비 내후성과 접착성에 큰 차이가 발생하는 것을 확인하였다.

Keywords

References

  1. 이병덕(2005), "제설제 종류에 따른 융빙성능 및 콘크리트에 미치는 영향 평가에 관한 연구" 한국도로학회논문집, Vol.7 No.5 pp.113-123
  2. American Society for Testing and Materials, "Test Methods for Sealants and Fillers, Hot- Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements" ASTM D 5329
  3. American Society for Testing and Materials, "Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements"ASTM D 5893
  4. European Standard "Cold applied joint sealants - Part 6: Test method for the determination of the adhesion/cohesion properties after immersion in chemical liquids" EN 14187-6 (2003)