• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.5
• /
• pp.531-538
• /
• 2013

The primary function of centrifugal compressor volute is to flow from the impeller and diffuser to the pipe system. The strength of the scroll vortex and flow pattern in the volute vary with the operating point. This is largely caused by the interaction between the impeller and the volute flow fields. The recirculation flow around the tongue and the scroll vortex can be used to understand the characteristics of the volute flow at off-design points. The present study aims to find the characteristics of a flow pattern in the diffuser and volute of a centrifugal compressor from the rectangular cross section of the volute. Measurements are carried out using PIV. The results obtained in this study show that the separation region around the tongue is reduced and that the recirculation flow increases as the flow coefficient decreases.

• The Journal of the Korea Contents Association
• /
• v.18 no.9
• /
• pp.231-239
• /
• 2018

This study will analyze the meaning and the characteristic of advertising system in Facebook, one of the leading social platforms. This study focuses on finding the trend of mobile advertisement and observing Facebook users behavior. During 30seconds, the researcher observed the behaviors of 50 male and female university students which they access and use their own Facebook individually. After the observation, the researcher did an in-depth analysis based on offline discussion with tested participants. As a result, it can be classified in positive causes and negative causes of the advertisement. There are 3 positive causes; native advertisement effect, acquaintance effect, and big data effect and they help people watch the advertisement positively. 1.5-3 times per second high speed scroll behavior (Finger effect) is the main negative cause and it help users escape from the advertisement easily. These positive and negative causes have an interactive synergy which reduces user stress and makes people enjoy ad more than other media. Finally, both of them cause making Facebook a better environment for the advertisement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6053-6059
• /
• 2013

Heat pumps have attracted considerable attention as a green energy system because they use renewable energy, such as geothermal, solar energy and waste heat, and can have a low electricity consumption rate compared to other conventional electric heating system. Many studies of high efficient heat pump system design was performed previously,but it is not easy to find any an analytical model that consists of components (e.g. compressor, heat exchangers, and expansion valve), not only having an interrelation and interconnection each other but also being flexible to any change in geometry and operating parameters. In this study, a computational model was developed for a heat pump with warm air as a heat source using the one-dimensional modeling software, AMESim. In combination with an independently-developed analytical model for a scroll compressor, the heat pump model can simulate the physical characteristics and actual behavior of the heat pump precisely. In addition, the reliability of the model was improved by verifying the simulation results using experimental data. The simulation data fell into the 10% error range compared with the experimental data. The heat pump model can be used for system optimization studies of product development and applied to other applications in a range of industrial field.

• Transactions of the Korean hydrogen and new energy society
• /
• v.31 no.5
• /
• pp.429-435
• /
• 2020

This paper describes the experimental study of reverse-Brayton refrigeration system for application to high temperature superconductivity electric devices and LNG re-liquefaction. The reverse-Brayton refrigeration cycle is designed with operating pressure of 0.5 and 1.0 MPa, cooling capacity of 2 kW at 77 K, and neon as a working fluid. The refrigeration system is developed with multi scroll compressor, turbo expander and plate heat exchanger. From experiments, the performance characteristics of used components is measured and discussed for 77-120 K of operating temperature. The developed refrigeration system shows the cooling capacity of 1.23 kW at 77 K and 1.64 kW at 110 K.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4308-4313
• /
• 2011

The objective of this study is to investigate the cooling performance of the roof mounted air-conditioning system using electric driven scroll compressor for zero emission vehicles. This air conditioner with air source was used R-134a as a refrigerant and tested under various operating conditions such as refrigerant charge amount and indoor temperature, and compressor frequencies. Experimental results revealed that at all tested compressor frequencies, heat transfer rate of the evaporator increased and the cooling COP increased with the indoor temperature. In addition, the heat transfer rate of the evaporator was over 25.0kW sufficient for the cooling loads of an electric bus.

• Journal of Korea Foundry Society
• /
• v.38 no.2
• /
• pp.48-54
• /
• 2018

To improve the durability of the turbocharger, it is important to suppress cracking of the turbine housing; therefore, we investigated the initiation and growth of these cracks. First, we initiated a crack in the turbine housing using endurance experiments. After the endurance test, cracks mainly occurred in the valve seat, the nozzle area, and the scroll part of the turbine housing. The results of a fracture analysis of the cracks showed that cracks in the valve seat were initiated by fatigue fracture. This seems to be caused by the accumulation of mechanical and thermal stresses due to vibration of the turbine wheel and high-temperature exhaust gas. Also, cracks in nozzle and scroll area were initiated by intergranular corrosion due to the exhaust gas. Thus, although there are differences in the cause of initiation according to the site, a concentric waveform was observed in all fracture planes. This phenomenon indicates that cracks gradually grow due to repeated stress changes, and the main causes are the temperature difference of the exhaust gas and the vibration caused by the turbine shaft.

• The KSFM Journal of Fluid Machinery
• /
• v.7 no.1 s.22
• /
• pp.17-23
• /
• 2004

Aeroacoustic characteristics of sirocco fan used in Over-The-Range (OTR) has been analyzed in this paper. A microwave hood combination over the gas range is short for the OTR. The flow phenomena of the double-sided sirocco fan was analyzed numerically and experimentally by using commercial code and three dimensional PIV for flow visualization. Also, microphone array is used in order to understand acoustic characteristics of OTR. Two dimensional unsteady flow and acoustic simulation is tried to qualitatively estimate the effects of tonal noise and broadband noise on the overall sound pressure level. It is found that tonal sound is generated from the strong interaction between the impeller and cutoff while broadband sound is generated from the strong secondary flows along the scroll surface. To reduce the noise level, the V-shape cut-off was applied to improve the sound quality by reducing tonal noise. So the peak noise at BPF (Blade Passing Frequency) was almost reduced. The shape of flow-guide to suppress the secondary flow over the scroll surface was carefully checked. It is found that this affects flow pattern at the fan exit and reduces the broad band noise. Through this numerical and experimental study, the sound pressure level was lowered by 4dBA compared to that of the previous fan at the operating point.

• Journal of Korea Game Society
• /
• v.21 no.4
• /
• pp.25-42
• /
• 2021

This study investigated motivation factors of mods and their influence on user response to analyze IS Continuance. The data of 610 players of who used mods was analyzed by a Post Acceptance Model of IS Continuance, followed by empirical results. As a result of SEM, the motive factor was divided into the 'Media characteristic', 'Content characteristic', and 'Situational characteristic'. The motive factors significantly affected user response of 'Perceived Usefulness', 'Satisfaction', and 'IS Continuance'; each motivation factors have different influence and 'Content characteristic' significantly affected the IS Continuance.

• Journal of Korea Multimedia Society
• /
• v.20 no.8
• /
• pp.1464-1471
• /
• 2017

One of the important factors in game design is difficulty adjustment. An appropriate level of difficulty makes users have a sense of challenge and interest. However, the adjustment of difficulty takes a lot of time and effort, because of its ambiguity. To solve the problem, we propose a difficulty control method using a fuzzy theory. In this paper, a simple demonstration is exemplified to verify the effectiveness of our method. Experimental results show that the difficulty of the game changes according to the user's skill.

• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.257-263
• /
• 2001

In the analysis of product reliability, the fault tree is widely used since it shows the interrelations of the faults that lead to the product fault. A top-down approach based on experts’ experience is commonly used in the fault tree construction and the trees often take different forms depending on the intent of the analyst. In this work it is studied how to construct fault trees with the utilization of function trees obtained from analyzing the functions and sub-functions of products in order to suggest a generic way of fault tree construction. The function tree of a product is obtained by analyzing basic functions comprising the product main function in a bottom-up approach so that it enables to construct an objective fault tree. The fault tree for a scroll compressor is shown as an example.