• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.2157-2161
• /
• 2003

In this paper, the response surface method using three-dimensional Navier-Stokes analysis to optimize the shape of a forward-curved blades centrifugal fan, is described. For numerical analysis, Reynolds-averaged Navier-Stokes equations with standard k-e turbulence model are transformed into non-orthogonal curvilinear coordinate system, and are discretized with finite volume approximations. Due to the large number of blades in forward-curved blades centrifugal fan, the flow inside of the fan is regarded as steady flow by introducing the impeller force models for economic calculations. Linear Upwind Differencing Scheme(LUDS) is used to approximate the convection terms in the governing equations. SIMPLEC algorithm is used as a velocity-pressure correction procedure. Design variables, location of cur off, radius of cut off, expansion angle of scroll and width of impeller were selected to optimize the shapes of scroll and blades. Data points for response evaluations were selected by D-optimal design, and linear programming method was used for the optimization on the response surface. As a main result of the optimization, the efficiency was successfully improved. It was found that the optimization process provides reliable design of this kind of fans with reasonable computing time

• Journal of Power System Engineering
• /
• v.17 no.2
• /
• pp.87-94
• /
• 2013

Applicability of organic Rankine cycle for a passenger car with 3.5 L gasoline engine to convert low grade waste heat to useful shaft power has been numerically studied. Working fluid is R134a, and the Rankine cycle is composed of boiler for recovering engine cooling water heat, super heater for recovering exhaust gas heat, scroll expander for converting waste heat to shaft power, condenser for heat emission, internal heat exchanger, and feed pump. Assuming efficiencies of 90% for the heat exchangers, 75% for the scroll expander, and 80% for the feed pump, the Rankine cycle efficiency of 5.53% was calculated at the vehicle speed of 120 km/hr. Net expander shaft output after subtracting the power required to run the pump was 3.22 kW, which was equivalent to 12.1% improvement in fuel consumption. About the same level of improvement in the fuel consumption was obtained over the vehicle speed range of 60 km/hr~120 km/hr.

• Journal of Mechanical Science and Technology
• /
• v.14 no.10
• /
• pp.1061-1071
• /
• 2000

Linear cyclic systems (LCS's) are a class of systems whose dynamic behavior changes periodically. Such a cyclic behavior is ubiquitous in systems with fundamentally repetitive motion. Yet, the knowledge of the noise and vibration transmission paths in LCS's is quite limited due to the time-varying nature of their dynamics. The first part of this two-part paper derives a generic expression that describes how the noise and/or vibration are transmitted between two (or multiple) points in the LCS's. In Part II, experimental validation of the theoretical development of Part I is provided. The noise and vibration transmission paths of the scroll and rotary compressors (two typical LCS's) are examined to show that the LCS's indeed generate a series of amplitude modulated input signals at the output, where the carrier frequencies are harmonic multiples of the LCS' fundamental frequency. The criterion proposed in Part I to determine how well a given LCS can be approximated as a linear time-invariant systems (LTIS) is applied to the noise and vibration transmission paths of the two compressors. Furthermore, the implications of the experimental validations/applications are discussed in order to assess the applicability of the noise/vibration source and transmission path identification techniques based on the assumption that the system under consideration is linear and time-invariant.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.194-202
• /
• 2008

In this study, we investigated the tribology behaviour of two different bearing materials. One of these alloys content is Cu(90)-Sn(10) alloy and is widely used in the automotive industry.The other is Al alloy. This bearing content is Al-Sn-Si-Cu. Therefore, it is required to study on the lublicating characteristics of bearing according to different materials. In this study, compressor bearings made by respectively "PTFE solid lubricant" and "AI alloy with superior load carrying capacity, rubbing and impact endurance", have gone through journal bearing test. Lubrication and abrasion characteristics are evaluated by analyzing the material characteristics of a scroll compressor bearing bush. The AI alloy bearing showed the most excellent lubrication and abrasion characteristics than Cu-Sn alloy under high load condition.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.11
• /
• pp.1084-1091
• /
• 2004

In automotive air handling system, mixing of air streams by the cooler and the heater affects the comfort of cabin room. In the present study, computer-aided analysis is done to improve the thermal comfort and for the optimal design of automotive HVAC system. The simulation software used was FLUENT, and complicate geometries were created by three dimensional CAD. Air flow volume, fir distribution rate and temperature controllability and temperature differences between upper and lower discharge air are analyzed through numerical simulation at vent, floor and defrost mode. Also, velocity vector of sirocco fan is investigated through the scroll housing. The velocity vector magnitude is larger at lower region of fan than that at any other regions. Recirculation and disturbance of air is relatively high near the cut-off edge in the scroll housing. By using the results of this study, the time for prototype production can be reduced and timely decisions can be made to determine initial design directions.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.7
• /
• pp.551-556
• /
• 2003

The present study concerns an experiment on the heating characteristics of a system air-conditioner (A/C) using PWM method or inverter method at low temperature con-ditions. The compressors used are digital scroll type and BLDC inverter type. Under the low outside temperature condition, -5$^{\circ}C$, -1$0^{\circ}C$, -15$^{\circ}C$, heating capacities and COPs are mea-sured by the psychometric calorimeter using air enthalpy method. Also, outlet air temperatures at heating operation mode are measured at -5$^{\circ}C$, -1$0^{\circ}C$ and -15$^{\circ}C$. Experimental results show that COPs of the system A/C using a PWM method are more effective than those of the inverter method at heating operation mode. Although the heater is on, COPs of PWM method are similar to those of BLDC inverter method. Moreover, the heating capacities of PWM method at -5$^{\circ}C$, -1$0^{\circ}C$ and -15$^{\circ}C$ are larger about 10~20% and outlet air tempe-rature at -15$^{\circ}C$ is larger about 10%, compared to the inverter method.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.1
• /
• pp.83-92
• /
• 2000

Sound intensity method is well known as a visualization technique of sound field or sound propagation in noise control. Sound intensity or energy flux is a vector quantity which describes the amount and the direction of net flow of acoustic energy at a given position. Especially two dimensional sound intensity method is very useful in evaluating periodic characteristics and acoustic propagation mode of noise source. In this paper, we have studied the noise source Identification, acoustic sound field analysis, and characteristics of noise source of rotary compressor and scroll compressor for air conditioner using complex sound intensity method. Also we proposed a now method of time domain analysis which is used in evaluating of position of noise source in rotary and scroll compressor in this paper This paper presents the advantage, simplicity and economical efficiency of this method by analysing the characteristics of noise source with two dimensional complex sound intensity simultaneously.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.01a
• /
• pp.273-276
• /
• 2021

본 논문에서는 사용자의 관심영역(Region of interests, ROI)를 기반 스크롤을 통해 데이터를 좀 더 빠르고 효율적으로 검색할 수 있는 사용자-데이터 인터페이스를 제안한다. 사용자가 관심있는 정보나 콘텐츠를 찾는 행동에서 착안한 우리의 접근 방식은 주어진 콘텐츠에서 ROI를 효율적으로 계산하고, GMM(Gaussian mixture model, 가우시안 혼합 모델)에서 착안해 개발한 커널을 기반으로 사용자가 관심 있어 하는 정보의 위치로 부드럽고 빠르게 화면을 이동시켜 정보를 탐색한다. 과정을 설명하기 앞서, 다수의 ROI가 있을 때 스크롤의 현 위치는 항상 두 ROI의 사이에 있다. 그 두 사이의 거리가 가장 짧은 두 ROI에 각각 우리의 커널을 적용하면 현 위치에서 스크롤 가속에 적용 가능한 두 개의 관성이 생긴다. 여기에 선형 보간법(Linear interpolation)을 적용하여 한층 부드러운 하나의 관성으로 만들고, 이것을 스크롤에 적용한다. 결과적으로, 오직 사용자의 입력에 따라 정보가 검색되는 기존의 접근법과는 달리, ROI와 DOI(Degree of interests, 중요도)를 기반으로 향상된 스크롤을 통해 사용자가 관심 있어 하는 정보나 콘텐츠를 보다 쉽게 직관적으로 찾아줄 수 있기 때문에 사용자는 탐색 시간을 절약할 수 있다.

• International Journal of Advanced Culture Technology
• /
• v.11 no.2
• /
• pp.415-420
• /
• 2023

Since 2017, the application of VR technology in the game field has become more and more extensive, and more and more scholars have conducted research on VR games, especially VR horror games. This article will conduct research on VR horror games and scrolling scroll games through comparative analysis, and believes that VR horror games are much stronger than side scrolling scrolling games in terms of immersion. However, due to its unique flat third-person perspective, completely different operation methods and the existence of 'the fourth wall in side-scrolling horror games, Players can clearly realize that they are in an absolutely safe environment, and that they are just manipulators of game characters, not experiencers of terrorist events, so players will not receive excessive fright. Therefore, this article believes that the number of players who like side-scrolling horror games with certain horror elements is greater than the number of players who like pure VR horror games.Many traditional games in this paper have their own advantages in many aspects. For example, many traditional games such as horizontal games also have good development prospects in the future. We should promote the research on games in the academic community from multiple angles, not limited to popular VR games.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.41-48
• /
• 2006

An anti-collision algorithm is very important in the RFID system because it decides tag identification time and tag identification accuracy. We propose improved anti-collision algorithms using Bin slot in RFID system. In the proposed algorithms, if the reader memorizes the Bin slot information, it can reduce the repetition of unnecessary PingID command and the time to identify tags. If we also use ScrollA11ID command in the proposed algorithm, the reader knows the sequence of collided E bits. Using this sequence, the reader can reduce the repetition of PingID command and tag identification time. We analyze the performance of the proposed anti-collision algorithms and compare the performance of the proposed algorithms with that of the conventional algorithm. We also validate analytic results using simulation. According to the analysis, for the random tag n, comparing the proposed algorithms with the conventional algorithm, the performance of the proposed algorithms is about $130\%$ higher when the number of the tags is 200. And for the sequential tag ID, the performance of the conventional algorithm decreases. On the contrary, the performance of the proposed algerian using ScrollA11ID command is about $16\%$ higher than the case of using random tag ID.