• 대한한방내과학회지
• /
• 제25권4호
• /
• pp.45-51
• /
• 2004

Background : Atopic Dermatitis is a chronic and recurrent skin disease. it is characterized as itch-scratch cycle and topical or systemic use of corticosteroids is required in western medicine. Though its effects on major symptoms are impressive, these treatments are prone to several side effects and tend to recur after months or years. So potential treatments have been actively studied in Estern medicine, especially Sasang constitutional therapy, which has fewer side effects. Objectives : The purpose of this study was to examine the effect of Sasang constitutional therapy on treating severe adult Atopic Dermatitis and preventing its recurrent symptoms. Methods : fifteen patients who had severe adult Atopic Dermatitis attended treatment of Sasang constitutional therapy and were followed up for one year. An oriental internal specialist first isolated Sasang constitution and a distinctive body type. Grading of Atopic dermatitis was measured by the guidelines offered by Rajka G. and Langeland T. Results : After treatment with Sasang constitutional therapy, the patients symptoms were improved and the mean Rajka and Langeland score reduced significantly from $7.73{\pm}0.79\;to\;3.4{\pm}10.91$. During the follow-up period of one year, the mean Rajka and Langeland score was $2.72{\pm}2.06$ which was lower than last treatment. Conclusions : The results of this study support Sasang constitutional therapy as an effective therapy for severe adult Atopic Dermatitis. Follow up data suggest that this Eastern medical approach is of greater clinical value than the western medical approach in the long term.

• The Journal of Korean Physical Therapy
• /
• 제30권5호
• /
• pp.187-192
• /
• 2018

Purpose: This study compared the functional fitness and brake response of elderly and young drivers to confirm the correlation between the functional fitness and brake response. Methods: This study was a cross sectional observational design. Older drivers (>65age, n=21) and young adult drivers (20-40aged, n=20) were enrolled as subjects. The functional fitness of the subjects was measured using a senior fitness test consisting of a back scratch (BS), chair sit and reach (CSR), arm curl (AC), chair stand up (CSU), foot up and go (8-FUG), and 2-minute step (2-MS). The brake response used the virtual driving simulator to measure the brake reaction time (BRT) and braking distance (BD) according to the pedestrian protection and traffic signal compliance. Results: The older drivers had a lower BS (p<0.000), CSU (p=0.040), and 8-FUG (p=0.011) than the young adult drivers. BS and 8-FUG showed a significant positive correlation with the BRT and BD of pedestrian protection and traffic signal compliance. CSU showed a significant negative correlation with the BRT of pedestrian protection and traffic signal compliance. Conclusion: These findings suggest that the flexibility of the upper extremity, lower extremity strength, and agility are strongly correlated with the driving performance of elderly drivers.

• 대한기계학회논문집A
• /
• 제36권5호
• /
• pp.505-512
• /
• 2012

본 논문에서 태양전지 실리콘 웨이퍼 검사를 위해 광학스캐닝 메커니즘 기반 검사장비를 개발하였다. 그 중에서 다양한 결함검사 요구와 적절한 조명조건을 만족하는 구조적 하이브리드 조명시스템을 설계하였다. 그 다음으로 실험계획법을 이용하여 구조적 하이브리드 조명시스템의 최적 조명조건을 마스터 유리와 실리콘 웨이퍼에서 선정하였다. 마스터 유리에서 최적 조명조건은 B-강, BG-강, BR-강, BGR-강 이며, 실리콘 웨이퍼에서 최적조건은 R-중-B-중 이다. 이 최적조명조건을 적용하여 실리콘 웨이퍼 표면을 검사한 결과, 핀홀, 스크래치, 치핑 등 다수의 표면결함을 정확하게 검출하였다. 구조적 하이브리드 조명시스템은 태양전지 실리콘 웨이퍼 표면결함 검사에 유용하게 사용될 수 있다.

• 한국재료학회지
• /
• 제22권5호
• /
• pp.227-236
• /
• 2012

Ionomer is a thermoplastic that is composed of covalent bonds and ionic bonds. It is possible to use this material in processes such as injection molding or extrusion molding due to the material's high oil resistance, weatherproof characteristics, and shock resistance. In this study, a new ionomer having a multifunctional group was prepared by a stepwise neutralization system with the addition of acidic and salt additives. In step I, to increase the contents of the multifunctional group and the acid degree in ethylene acrylic acid (EAA), MGA was added to the ionomer resin (EAA). A new ionomer was prepared via the traditional preparation method of the ionic cross-linking process. In step II, metal salt was added to the mixture of EAA and MGA. The extrusion process was performed using a twin extruder (L/D = 40, size : ${\varphi}30$). Ionomer film was prepared for evaluation of gas permeability by using the compression molding process. The degree of neutralized and ionic cross-linked new ionomer was confirmed by FT-IR and XRD analysis. In order to estimate the neutralization of the new ionomer film, various properties such as gas permeation and mechanical properties were measured. The physical strength and anti-scratch property of the new ionomer were improved with increase of the neutralization degree. The gas barrier property of the new ionomer was improved through the introduction of an ionic site. Also, the ionic degree of cross-linking and gas barrier property of the ionomer membrane prepared by stepwise neutralization were increased.

• 한국표면공학회지
• /
• 제45권6호
• /
• pp.257-263
• /
• 2012

CrN/AlN multilayer coatings with various bilayer periods in the range of 1.8 to 7.4 nm were synthesized using a closed-field unbalanced magnetron sputtering method. Their crystalline structure, chemical compositions and mechanical properties have been investigated with Auger electron spectroscopy, X-ray diffractometry, atomic force microscopy, nanoindentation, scratch tests. The properties of the multilayer coatings varied strongly depending upon the magnitude of the bilayer period. The multilayer coating with a bilayer period of 1.8 nm showed the maximum hardness and an elastic modulus of approximately 37.6 and 417 GPa, respectively, which was 1.54 times higher than the hardness predicted by the rule of mixture from the CrN and AlN coatings. The hardness of the multilayer coating increased as the bilayer period decreased, i.e. as the rotation speed increased. The Hall-Petch type relationship, hardness being related to (1/periodicity)$^{-1/2}$, suggested by Lehoczky was confirmed for the CrN/AlN multilayer coatings with bilayer period close to the 5-10 nm range. With decreasing bilayer period, the surface morphology of the films became rougher and the critical load of films for adhesion strength gradually decreased.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.249-249
• /
• 2015

Silver films have been of considerable interest for years due to their better performance relative to other metal films for engineering applications. A series of multi-layer silver coatings with different thickness (i.e. 0.3 um to 1.5 um) were prepared on Aluminium substrate containing copper undercoat by direct current (DC) magnetron sputtering method. For the comparative purpose, similar thickness silver coatings were prepared by electrolytic deposition method. Microstructural, morphological, and mechanical characteristics of the silver coatings were evaluated by means of scanning electron microscope (SEM), X-ray diffraction (XRD), Surface roughness test, microhardness test and nano-scratch test. From the results, it has been elucidated that the silver films prepared by DC magnetron sputtering method has superior properties in comparison to the wet coating method. On the other hand, DC magnetron sputtering method is relatively easier, faster, eco-friendly and more productive than the electrolytic deposition method that uses several kinds of hazardous chemicals for bath formulation. Therefore, a New Work Item Proposal (NWIP) for the test methods standardization of DC magnetron sputtered silver coatings has recently been proposed via KATS, Korea and a NP ballot is being progressed within a technical committee "ISO/TC107-metallic and other inorganic coating".

• 한국염색가공학회지
• /
• 제29권3호
• /
• pp.105-114
• /
• 2017

High tenacity polyethylene(HTPE) fiber is one of the most important synthetic fibers which possesses outstanding properties such as low density, excellent surface hardness and scratch resistance, superior electrical insulation and low cost. In this study, we dyed high tenacity polyethylene filaments using three different solvent dyes based on log P calculations. We evaluated the dyeing characteristics of dyed high tenacity polyethylene filaments based on dyeing temperature, dyeing time and concentration of solvent dyes. We also analyzed the tensile strength and elongation properties of dyed high tenacity polyethylene filaments with various dyeing temperature and dyeing times. The optimized dyeing condition can be found at $120^{\circ}C$ for dyeing time of 1 hour with 4%(o.w.f.) of solvent dyes.

• Design & Manufacturing
• /
• 제12권1호
• /
• pp.41-46
• /
• 2018

This study proves the causes of cylinder and piston jam by scratches which is the fatal problem of hydraulic breaker through the thermal analysis and thermal-structural coupled field analysis. The trouble from the scratch is a complex problem which can be caused by manufacturing process (this is an internal factor) and the users mistake or contamination in the hydraulic circuit (these are an external factor). Hence, it's not easy to investigate the causes, also hard to prevent the recurrence. In this reason, hydraulic breaker manufacturers are trying to improve the manufacturing process such as machining, heat treatment, grinding, cleaning, also to prevent the contamination in hydraulic circuit and to remove the remains. It's being managed thoroughly by manufacturers. This study shows the effect of the temperature rise by the frictional heat generated when the piston hits the tool on the hydraulic oil while the hydraulic breaker is operating, also the temperature distribution when it starts to affect main components of hydraulic breaker. The stress and the amount of deformation also could be found through thermal-structural coupled field analysis. It proved that the stress and deformation are proportionally increased according to the temperature rise in hit area, and it affects the cylinder and the viscosity of hydraulic oil inside the cylinder when it heats up beyond the certain temperature.

• 폴리머
• /
• 제35권2호
• /
• pp.183-188
• /
• 2011

수산기를 함유한 3관능 아크릴레이트(PETA; pentaerytritol triacrylate)를 pentaerytritol과 acrylic acid의 축합반응으로 합성하였다. 최적반응 조건이 용매로 heptane이 사용되고 pentaerytritol과 acrylic acid의 몰비가 1:4일때, 최고수율의 3관능 아크릴레이트를 얻을 수 있었다. 그 후, 다양한 디이소시아네이트와 PETA간 축합반응을 통해 여러가지 6관능 우레탄 아크릴레이트(UA)를 합성하였다. 합성된 우레탄 아크릴레이트는 반응형 희석제를 광개시제와 함께 자외선 광경화한 후, 형성된 경화필름의 물성을 측정하였다. 방향족 벤젠고리를 포함하고 있는 우레탄 아크릴레이트는 지방족 분자를 포함하고 있는 우레탄 아크릴레이트에 비해 내후성이 취약하였으며, UA-2의 경우 연필경도 및 내스크레치성이 가장 우수하였고 경화도가 가장 우수하였던 UA-l의 경우 내약품성이 가장 우수하였다. 밀착성의 경우 모든 조성에서 우수한 결과를 얻었으며, 경화도가 가장 낮은 UA-3의 경우 물리적 특성이 가장 낮았다.

• 폴리머
• /
• 제36권5호
• /
• pp.599-605
• /
• 2012

기상중합으로 제조된 poly(3,4-ethylenedioxythiophene)(PEDOT) 박막을 다양한 금속 알콕사이드 졸 용액으로 후처리하여 내용제성, 내스크래치성, 연필경도와 같은 물리화학적 특성을 효과적으로 개선하였다. 기상중합으로 제조된 PEDOT 층위에 금속 알콕사이드의 졸-젤 공정으로부터 유도된 금속 산화막이 형성되어 전기적 특성의 큰 손실 없이 기계적 물성을 증대시킬 수 있었다. 금속 알콕사이드 졸은 다양한 기능기를 가지는 실리콘 및 티타늄계 알콕사이드 화합물을 사용하였다. 이 중에서 tetraethyl orthosilicate를 기반으로 한 금속 알콕사이드 졸을 사용한 경우의 PEDOT-금속산화물 복합 박막이 표면저항, 투과도 및 다양한 물리화학적 물성 관점에서 가장 우수하였다. PEDOT-금속산화물 복합 박막의 전기적, 광학적, 물리화학적 특성 관점에서의 최적화를 위하여 금속 알콕사이드 졸의 함량, 산화제 함량, 후처리 후의 건조온도에 따른 효과를 살펴보았다.