• 상하수도학회지
• /
• 제29권4호
• /
• pp.459-468
• /
• 2015

Deposits discharged through the cleaning mainly were cement mortar, bitumen paintings and rust pieces, and fragments of perforation, stones and gravels. Deposits were more removed through swabbing pig cleaning rather than air scouring cleaning on the whole. However, air scouring cleaning were not influenced by the constraint conditions such as a change in the diameter or the presence of the valve in water mains compare to swabbing pig cleaning. So, it was thought that air scouring cleaning might be more favorable to water distribution network cleaning in the future. After the cleaning, water quality including residual chlorine and turbidity also was improved because of the removal of a significant amount of the deposits. Therefore, if the cleaning is continuously and regularly implemented in water mains, it is expected that it will help to recover the reliability and to preserve the health of water quality.

• 한국응용과학기술학회지
• /
• 제23권1호
• /
• pp.37-44
• /
• 2006

Solvent-free low foaming scouring agents (LFSC) were prepared by blending of 2-ethylhexylaminoethyl sulfate (2-EHAS), POE(10) octadecylbenzyl- ammonium chloride (POBAC) and Sedlan FF-200 (FF-200). As the results of several tests, 2-EHAS/POBAC/FF-200/water (8g/12g/20g/60g) mixture (LFSC-5) showed good cleaning power, penetrating ability and stability to alkali, and gave less problem in water pollution. The foaming power of LFSC-5 measured by Ross and Miles method was 8mm foam height immediately after foaming, and that measured by Ross and Clark method was less than 300mm foam height at $30^{\circ}C$, and 18mm at $80^{\circ}C$. As a result, LFSC-5 proved a good low foaming scouring agent for fiber.

• 한국해양공학회지
• /
• 제31권4호
• /
• pp.281-287
• /
• 2017

In the case of fixed offshore wind turbines, scouring phenomena have been reported around sub-structures as a result of currents, which seriously damage the structural stability. A parametric study of the various sub-structures of a fixed offshore wind turbine was performed to investigate their effects on the scouring phenomena. For a suction bucket foundation and monopile, the effects of the stick-up heights and water depth were studied, respectively. The open source libraries, called OpenFOAM, were used to simulate a violent flow around a foundation. The numerical methods were selected based on a two-dimensional analysis of a suction bucket. Based on the results for various stick-up heights, a larger scouring region was observed with an increase in the stick-up height because of the down-wash flow around a foundation. Based on the results for various monopile water depths, the water depth had an insignificant effect on the scouring.

• 물과 미래
• /
• 제6권1호
• /
• pp.19-28
• /
• 1973

Presented is the results of a model study about scouring around a bridge pier. 24 different types of piers were inestigated for the depth and width of scouring. The grain size of sand used in the experiment ranges from 0.149 to 2, 380mm, The time required to reach the stable bed formation was about 30min, with the range of Froud number from 0.58 to 0.69. It has been found that the scouring is most severe at the frontal side of the pier and decreases with decreasing a contact angle (between the center line of the pier and tangent to the frontal face). For design purposes, it is recomanded that the contact angle at the frontal face is 25 degrees for a triangular type and 40 deyrees for a circular type respectively.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.477-480
• /
• 2008

Hydraulic experiment was executed to identify the souring range of bride pier. The experiment categorized three kind of bridge pier shape, that is composed of circle shape, square shape and the special shape. Measured scouring data was compared with the results by empirical CSU formula which was generally used in practice. As empirical formula could not consider backfill, measured scouring range is by far smaller than results of CSU formula. Therefore in case of design anti-scouring structure, there is the possibility of overestimation in case of using empirical formula.

• 한국염색가공학회지
• /
• 제8권1호
• /
• pp.64-72
• /
• 1996

To develop a scouring method for the high-grade quality and the high value added of flax for spinning, it was measured and analyzed weight loss and degree of injury with change of scouring concentration, time, temperature and pH. We got the f ollowing results; Firstly, in case that flax was scoured at a fixed condition, the weight loss and degree of injury of scoured flax under the no-cutting condition were lower than that of scoured flax under the cutting condition. Secondly, when flax was scoured with $Na_{2}CO_{3}$, it was obtained that the higher weight loss and degree of injury and weight loss with the increase of scouring time and condition. The degree of injury was lower than any other under the treatment condition of 4% $Na_{2}CO_{3}$concentraion for 2 hours. Finally, when alkaline scoured flax was rescoured by pectinase, enzyme activation effect was the most active under the treatment condition of pH 4 for 2 hours. The scouring effect was better than that of alkaline scouring only.

• 한국수자원학회논문집
• /
• 제53권11호
• /
• pp.951-960
• /
• 2020

본 연구에서는 실내실험을 통하여 기능을 상실한 보 철거로 인하여, 급경사가 형성된 짧은 구간에서 두부침식과 천급점 변화, 그리고 교호사주의 거동을 고려한 하도의 적응과정을 정량적으로 분석하였다. 보 상류에서 두부침식이 발생하여 천급점은 상류로 이동하였다. 실험초기에 빠르게 이동하지만, 시간이 증가하면서 이동속도가 감소하였다. 교호사주가 발달한 조건에서 이동속도는 사주가 발생하지 않은 조건에서보다 빨랐다. 세굴심은 교호사주가 발생하지 않는 조건에서 보다 발생하는 조건에서 더 깊었다. 시간이 증가할수록 최대세굴심은 하류로 이동하며, 최대세굴심의 깊이와 이동속도는 감소하였다. 무차원 최대세굴심은 상류에서 유입되는 유사가 포착되고 되메우기가 진행되면서 이동속도가 감소하였다. 무차원 되메우기 속도가 증가할수록 무차원 최대세굴심은 감소하였다. 초기에 최대세굴심이 깊은 곳에서 되메우기가 빠르게 진행되며, 최대세굴심이 얕은 곳에서는 되메우기가 느리게 진행되었다. 특히, 무차원 되메우기 속도가 5이하에서는 무차원 최대세굴심이 급격하게 감소하며, 그 이후에서는 완만하게 감소하였다.

• 한국수자원학회논문집
• /
• 제52권2호
• /
• pp.133-139
• /
• 2019

본 연구는 하상재료의 종류와 유속에 따른 세굴변화에 대한 연구를 진행하였고, 유속, 구성방법 및 재료와 세굴에 대한 상관관계를 정의하여 호안 및 제방의 운용성을 검토하고자 실험을 통한 연구를 진행하였다. 본 연구의 실험에 사용된 재료는 제방에 사용되고 있는 재료로 모래, 황토를 이용하였다. 실험실규모 고속수로에서 다양한 계측장비들을 이용하여 유속의 변화에 따른 재료의 세굴을 측정하였다. 이를 통해 세굴 전 후의 재료변화를 수치적으로 분석하였다. 고유속흐름에서 하상재료에 따라 세굴의 정도를 비교 평가하여 안정성에 대한 연구도 진행하였다. 실험 결과 모래의 경우 응집력이 매우 약하여 1.0 m/s 이하에서도 40% 이상의 재료가 유실이 되고 황토의 경우 모래보다 유속이 빠른 2 m/s 이상에서도 6% 이하의 재료가 유실이 되었다. 재료가 유실된 이유중 하나는 강한 응집력으로 건조균열이 발생하여 세굴에 취약한 결과를 보였다. 본 연구에서는 이러한 건조균열의 발생부터 재료가 유실되는 현상을 제거하는 방법부터 재료에 대한 구성과 유실정도를 평가 하였다.

• 공업화학
• /
• 제4권2호
• /
• pp.358-364
• /
• 1993

2-Ethylhexylaminoethyl sulfate, Na-dioctyl sulfosuccinate, Newpol PP-2000, MJU-100, 에틸렌글리콜 및 유기용제 등을 블렌딩하여 저기포성 정련제(SLFS)를 제조하였다. SLFS로서 여러가지 물성시험을 해 본 결과, SLFS-2는 정련효과, 침투력, 유화력, 내알칼리성 등이 양호하였으며, 수질오염에 대한 영향이 크지 않았다. 또한 SLFS-2는 Ross & Miles법에 의한 거품생성 직후의 기포력이 포고 8mm로 나타났고, Ross & Clark법에 의한 기포력이 $30^{\circ}C$에서는 포고 300mm 이하로, $80^{\circ}C$에서는 15mm를 각각 나타내어 양호한 저기포성 정련제임이 입증되었다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.429-433
• /
• 2004

According to researchers, the influential factors of scouring are generally divided into three factors: the flow conditions, the type and position of structures, and the characteristics of bed materials. In addition, scouring is affected by the 3-dimensional turbulent boundaries, the unsteady flow, the movement of sediment in the scour-hole area, the approach flow velocity and depth, the width of bridge foundation/pier, and the particle size of bed materials. However, it is difficult to estimate the scour depth near bridge piers when all conditions are factored in at once. Therefore, for reasonably accurate estimates of scour depth, it is essential to consider sufficiently the flow force and resisting force for scour. That is, to determine the shear stress concerning the bed material distribution is needed. In this study, the experiments were performed under the condition of a steady state of flow. As a result, scouring occurred at velocity ratios of 0.476,$(V/V_c=0.476)$, and the scour depth was increased linearly as the velocity ratio increased. in addition, the average values of shear stress ratio at zero scouring depth in both rectangular and circular piers were approximately 7$(\tau_c/\tau_{approach})$ and in the case for same size bed particle material. The results of this study can be used for the fundamental material for estimating the scour depth of bed materials.