• Journal of Korea Water Resources Association
• /
• v.32 no.1
• /
• pp.49-59
• /
• 1999

In order to understand the present situation of bridge scouring and to provide the fundamental information for bridge design, in-situ measured data is analyzed for bridge scours at small and medium streams in the heartland of Korea. The physical parameters affecting the bridge scouring such as flow depth, velocity, pier length and width, scouring depth, and the angle between flow and pier are extensively surveyed and measured. According to the locality and the pier type data are classified to analyze. With these data, some important factors for the scour depth such as flow depth, angle and Froude number are investigated and applied to existing formulas proposed by many researchers. In addition, the computational results are compared with the measured and some of the applicable formulas in this region are recommended.

• Journal of Korea Water Resources Association
• /
• v.54 no.12
• /
• pp.1275-1284
• /
• 2021

This paper presents a machine learning technique applied to prediction of time-dependent local scour around bridge piers in both non-cohesive and cohesive beds. The support vector machines (SVM), which is known to be free from overfitting, is used. The time-dependent scour depths are expressed by 7 and 9 variables for the non-cohesive and cohesive beds, respectively. The SVM models are trained and validated with time series data from different sources of experiments. Resulting Mean Absolute Percentage Error (MAPE) indicates that the models are trained and validated properly. Comparisons are made with the results from Choi and Choi's formula and Scour Rate in Cohesive Soils (SRICOS) method by Briaud et al., as well as measured data. This study reveals that the SVM is capable of predicting time-dependent local scour in both non-cohesive and cohesive beds under the condition that sufficient data of good quality are provided.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.477-480
• /
• 2008

Hydraulic experiment was executed to identify the souring range of bride pier. The experiment categorized three kind of bridge pier shape, that is composed of circle shape, square shape and the special shape. Measured scouring data was compared with the results by empirical CSU formula which was generally used in practice. As empirical formula could not consider backfill, measured scouring range is by far smaller than results of CSU formula. Therefore in case of design anti-scouring structure, there is the possibility of overestimation in case of using empirical formula.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.11
• /
• pp.83-95
• /
• 2020

In order to evaluate the stability of the geo-structure of railway bridge, the response dominant frequency was analyzed based on a series of impact vibration load test results. The specifications of the experiment piers were obtained by referring to the completion design data, and when data was missing, a field study was conducted. The impact vibrations test according to the scouring progress was carried out at one pier scheduled to be abandoned, and it was confirmed that the response dominant frequency can be utilized as an evaluation index for scour. In addition, the response dominant frequency was measured through an impact load test at 46 piers in 5 bridges in operation, and the scour safety of the bridge was evaluated by comparing it with the japanese proposal formula.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.3
• /
• pp.630-644
• /
• 2016

We conducted a comprehensive review on artificial reefs (ARs) including seaweed reefs for marine afforestation in relation to their development and research from 1972 to 2016, and then systematically analyzed their current a state-of-the-art and practice. From the review, the followings conclusions are made. First, the objectives of AR projects in the Southeast Asia can be classified into three, i.e. protection and increase of fishery resources, local community's profits, and ecological tourism. Second, fish gathering effects by ARs can be determined in terms of wake region or wake length that tends to increase with the K-C (Keulegan-Carpenter) number. Third, ARs are desirable to deploy across a direction of the main flow but it is essential to keep the deployment interval two to four times the length of a single reef. Fourth, stability of ARs depends on how to evaluate drag coefficient, and Morison formula turns out to be practical. Fifth, local scours of ARs are likely to occur due to a downward flow around the center of the front surface. Finally, it is natural for ARs to positively contribute to the marine ecosystem but it is imperative to develop an evaluation method for the effects of ARs on the marine ecosystem.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.698-702
• /
• 2009

본 연구는 강원도 영서지방의 지방하천을 중심으로 수리특성 및 교각제원 등을 조사하여 기존 세굴심 산정식의 산정 값과 모형실험 산정 값을 비교 검토 하였으며, 또한 교각의 세굴에 영향을 주는 인자에 대하여 통계학적 방법인 민감도 분석을 하였다. 이에 따른 분석결과 기존 세굴심 산정식의 경우 전체 적으로 교각 크기가 커지면서 산정 값과 모형실험 산정 값간의 편차가 $1.09%{\sim}63.98%$ 를 보이고 있어, 강원도 하천의 경우 기존 세굴심 산정식을 적용하여 산정하기에는 적합하지 않은 것으로 판단되었으며, 기존 세굴심 산정식 중 교각크기만으로 형성된 산정식의 경우 세굴심산정이 간편하기는 하나, 수리특성을 충분히 반영하지 못한 산정식의 경우 민감도가 크게 떨어지는 것을 확인 할 수 있었다. 모형실험 산정 값과 세굴심에 대한 민감도 분석결과, 교각크기 64%, 수심 36% 순으로 세굴심 발생에 유의적인 영향을 미쳤으며, 모형실험의 세굴심 값을 토대로 회귀분석을 통하여 강원도 하천에 적합한 세굴심 산정식을 제안 하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.2
• /
• pp.23-32
• /
• 2023

Probabilistic and deterministic analyses are implemented for the armor units of rubble foundation mound of composite breakwaters which is needed to protect the upright section against the scour of foundation mounds. By a little modification and incorporation of the previous empirical formulas that has commonly been applied to design the armor units of foundation mound, a new type formula of stability number has been suggested which is capable of taking into account slopes of foundation mounds, damage ratios of armor units, and incident wave numbers. The new proposed formula becomes mathematically identical with the previous empirical formula under the same conditions used in the developing process. Deterministic design have first been carried out to evaluate the minimum weights of armor units for several conditions associated with a typical section of composite breakwater. When the slopes of foundation mound become steepening and the incident wave numbers are increasing, the bigger armor units more than those from the previous empirical formula should be required. The opposite trends however are shown if the damage ratios is much more allowed. Meanwhile, the reliability analysis, which is one of probabilistic models, has been performed in order to quantitatively verify how the armor unit resulted from the deterministic design is stable. It has been confirmed that 1.2% of annual encounter probability of failure has been evaluated under the condition of 1% damage ratio of armor units for the design wave of 50 years return period. By additionally calculating the influence factors of the related random variables on the failure probability due to those uncertainties, it has been found that Hudson's stability coefficient, significant wave height, and water depth above foundation mound have sequentially been given the impacts on failure regardless of the incident wave angles. Finally, sensitivity analysis has been interpreted with respect to the variations of random variables which are implicitly involved in the formula of stability number for armor units of foundation mound. Then, the probability of failure have been rapidly decreased as the water depth above foundation mound are deepening. However, it has been shown that the probability of failure have been increased according as the berm width of foundation mound are widening and wave periods become shortening.