• 대한치과기공학회지
• /
• 제43권3호
• /
• pp.93-98
• /
• 2021

Purpose: The aim of this study was to observe the surface roughness and surface topography of cobalt-chrome (Co-Cr) alloys with grinding time in dental barrel finishing. Methods: This study involved two types of Co-Cr alloys. Specimens were manufactured with the dimensions 10×10×2 mm. Each specimen was cast according to the manufacturer's instructions. The cast alloys were polished for 35 minutes at intervals of five minutes in an automatic barrel finishing. Specimens were imaged with a three-dimensional optical microscope to measure surface roughness. Results: BC specimens and GM specimens had the highest roughness (Ra) values in the ungrained control group, and the lowest Ra values were measured 20 minutes after grinding. Conclusion: The best conditions for grinding Co-Cr alloy using a dental barrel finishing were a weight ratio of polishing media, water, and compound of 150 g:200 g:5 g, and a rotation speed of 450 rpm. Grinding time to obtain appropriate surface roughness should be limited to 15 to 30 minutes.

• 대한치과기공학회지
• /
• 제25권1호
• /
• pp.71-79
• /
• 2003

The purpose of this study was to investigate bond strength of denture base resin repaired according to contamination. One commercial denture base resin and two different kinds of relines resin were tested; Lusiton 199(denture base resin), Vertex(reline resin) and TokusoRebase(repair resin). The specimens were processed according to the manufacturer's instructions to cured denture base resin(polymethylmethacrylate; PMMA) and reline resin. Bond strengths were examined by use of a three-point transverse flexural strength test. Data were analyzed with two-factor analysis of variance and Duncan's post-hoc test at $\alpha$=0.05. Generally, the bondstrength of heat-cured resin(Lusiton 199) was higher than the other resins. The contaminations produced an decrease in bond strength. Therefore the contamination, such as saliva or water must be avoided during the laboratory repair procedures.

• 대한임상검사과학회지
• /
• 제54권4호
• /
• pp.285-292
• /
• 2022

국제표준직업분류나 일본·미국의 법률시스템, 양성시스템를 통해서 본 안과검사인력은 안과전문의, 검안사, 시능훈련사, 검안기사, 안과기사가 포함된다. 국가통계포털 자료에 의하면 2022년 안과에 근무하는 안경사의 수는 의료기관 종별에 따라 파악이 가능하지만, 임상병리사의 수는 파악이 불가능하다. 다만, 본 연구를 통해서 상급종합병원의 경우 임상병리사가 안경사보다 많이 근무하는 것으로 조사되었다. 우리나라 안과검사실 인력의 경우 국제표준직업분류, 국제표준교육분류, 의료법, 의료기사 등에 관한 법률 및 고등교육법에 비추어 봤을 때, 미국의 검안사는 비교 대상이 아니며 안과전문의나 검안사의 지도를 받아 업무수행하는 검안기사가 부합되는 직업일 것이다. 민간자격으로 대한안과학회 및 대한검안학회에서 안과검사실에 종사하는 임상병리사 및 안경사에게 '임상검안사'라는 호칭을 부여하여 새로이 자격관리를 정립한다면 국민 안(眼)보건 향상에 더욱 도움이 되리라 생각된다.

• 한국과학교육학회지
• /
• 제17권2호
• /
• pp.179-189
• /
• 1997

In this study, a conceptual change model for effective laboratories was developed and its instructional effect on students' achievement, the acquisition of scientific conceptions, and the attitudes toward science was investigated. Considering several conceptual change models in literature and Korean educational situations, the conceptual change model was developed. The model consists of 5 stages; preliminary, prediction, exploration, consolidation and reconstruction, and application. The treatment and control groups (2 classes) were selected from a middle school in Seoul, and taught about the changes of states, density, and dissolution for three weeks. Prior to instruction, the Group Assessment of Logical Thinking and the Learning Approach Questionnaire were administered, and their scores were used as covariate and / or blocking variable. To examine students' alternative conceptions before the instructions, a pre-conceptions test was also administered. After the instructions, students' achievement, the acquisition of scientific conceptions, and the attitudes toward science were measured with a researcher-made achievement test, a post-conceptions test, and the subtests of the Test of Science-Related Attitudes, respectively. The results indicated that the score of the treatment group was significantly higher than that of the control group in the post-conceptions test. The students in the treatment group had also less alternative conceptions than those in the control group. However, there were no significant differences for the achievement and the attitudes toward science. Educational implications are discussed.

• 한국지구과학회지
• /
• 제31권6호
• /
• pp.637-646
• /
• 2010

이 연구의 목적은 지구과학 수업에 적용한 MBL(Microcomputer Based Laboratory, 이하 MBL)이 중학생의 그래프 능력, 과학탐구능력에 미치는 효과를 알아보고자 하는 것이다. 중학교 지구과학 내용 중 5개의 실험 주제에 대하여 MBL 활용 탐구 활동 자료를 개발하였다. 이 MBL 수업자료를 33명의 중학생들에게 적용하고 사전 검사와 사후 검사를 실시하였다. 연구의 결과는 다음과 같다. 첫째, MBL 수업은 중학생의 그래프 능력 향상에 유의미한 효과가 있었다. 그래프 능력의 하위 영역인 그래프 작성, 그래프 해석 능력 모두에서 유의미한 향상을 보였다. 특히 자료 변환하기 영역에서 유의미한 효과가 크게 나타났다. 둘째, MBL 수업은 중학생의 과학탐구능력 향상에 유의미한 효과가 있었다.

• 공학교육연구
• /
• 제13권5호
• /
• pp.55-60
• /
• 2010

Chemistry laboratory class was produced for senior high school freshmen with the cooperation of university staffs, high school teachers and the university students. Although the students who will take the lab class are senior high school freshmen, we decided to prepare four experiments that are simple and have highly visible reactions or transformation. That is, 1) Water purification, 2) Surface modification, 3) Briggs-Rauscher reaction, and 4) Polymer synthesis and characterization. After the safety guideline and experiment instructions by the faculty staffs, two teaching assistants (TAs) supervised each experiment. Since taking a direct part in it will provide stronger impact than only being one who is just watching the experiment, all experiments contained some process that the high school students must handle the reagents, tools or the equipment, by themselves. Although, the operation performed by the students was limited to a series of simple actions, the various unique phenomena presented by the experiments impressed the students. The lab class was fruitful not only for high school students, but also good for university students. The lab class provided good opportunity for them to improve the abilities to teach and guide someone.

• 대한치과기공학회지
• /
• 제39권1호
• /
• pp.9-16
• /
• 2017

Purpose: The purpose of this study was to evaluate flexural strength, composite surface and fractured surface of three different indirect composite resins. Methods: Fifteen bar-shaped specimens ($25mm{\times}2mm{\times}2mm$) were fabricated for each FL group (Flow type and Light curing) and PLP group (Putty type and Light, Pressure curing) and PL group (Putty type and Light curing) according to manufacturer's instructions and ISO 10477. Fabricated specimens were stored in the distilled water for 24 hours at the temperature of $37^{\circ}C$. Three-point bending strength test was performed to measure flexural strength using universal testing machine at a crosshead speed of 1mm/min (ISO 10477). Surface and fractured surface of specimens were observed by digital microscope. Results were analyzed with Kruskal-wallis tests (${\alpha}=0.05$). Results: Mean (SD) of three different indirect composite resins were 83.38 (6.67) MPa for FL group, 139.90(16.53) MPa for PLP group and 171.72(16.74) MPa for PL group. Flexural strength were statistically significant (p<0.05). Differences were not observed at fractured surface among three groups. However, many pores over $100{\mu}m$ were observed at PL group in observing surface of specimen. Conclusion: Flexural strength of composite resins was affected by second polymerization method and content of inorganic filler.

• 치위생과학회지
• /
• 제10권5호
• /
• pp.335-340
• /
• 2010

This study was performed to evaluate the fracture strength of the dental zirconia veneering ceramics for zirconia ceramic core. Six commercial zirconia veneering ceramics were used in this study, namely E-Max(Ivoclar vivadent, Inc, Liechtenstein), Creation ZI(KLEMA Dental produckte GmbH, Austria), Cercon ceram kiss(Degudent, GmbH, Hanau-Wolfgang, Germany), Triceram(Dentaurum, Ispringen, Germany), Zirkonzahn(Zirkonzahn GmbH, Italy), Zirmax(Alpadent, korea). All samples were prepared according to the relevant instructions of manufacture. Disc specimens were prepared to the final dimensions of 17 mm in diameter and 1.5 mm in thickness. The biaxial flexure strength test was conducted using a ball-on-three-ball method. All specimens were tested in a moisture-free environment. Average flexural strengths were analyzed with Weibull analysis and one-way analysis of variance(ANOVA). Significant differences were founded between the mean flexural strength values of five commercials zirconia veneering ceramics and the other. The flexural strengths and Weibull modulus were similar to those of five groups E-Max(EM), Creation ZI(CR), Cercon ceram kiss(CE), Triceram(TR), Zirkonzahn(ZI) with the exception of Zirmax(ZM). The biaxial flexural strength from Cercon ceram kiss(CE) was higher than those of other groups. Fracture analysis showed similar results for these five groups.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권11호
• /
• pp.3064-3082
• /
• 2023

During the last decade, several Electronic Orientation Aids devices have been proposed to solve the autonomy problems of visually impaired people. When hearing is considered the primary sense for Visually Impaired people (VI) and it is generally loaded with the environment, the use of tactile sense can be considered a solution to transmit directional information. This paper presents a new wearable haptic system based on four motors implemented in shoes, while six directions can be played. This study aims to introduce an interface design and investigate an appropriate means of spatial information delivery through haptic sense. The first experiment of the proposed system was performed with 15 users in an indoor environment. The results showed that the users were able to recognize, with high accuracy, the directions displayed on their feet. The second experiment was conducted in an outdoor environment with five blindfolded users who were guided along 120 meters. The users, guided only by the haptic system, successfully reached their destinations. The potential of tactile-foot stimulation to help VI understand Electronic Orientation Aids (EOA) instructions was discussed, and future challenges were defined.

• 대한치과기공학회지
• /
• 제43권2호
• /
• pp.56-61
• /
• 2021

Purpose: This study aimed to produce resin prosthetics using a dental automatic barrel finishing. Surface roughness and surface topography of resins were observed according to the grinding time of the dental automatic barrel finishing. Methods: This study was performed with thermopolymer, autopolymer, and photopolymer resins. The dimensions of the specimen were 10×10×2 mm. Each specimen was polymerized according to the manufacturer's instructions. The polymerized resin was honed for 30 minutes at 5-min intervals in a dental automatic barrel finishing. The specimen was observed using a three-dimensional (3D) optical microscope, and the surface roughness was measured. Results: After the polishing with the dental automatic barrel finishing, the heat-cured (HC) specimen showed the highest and lowest values of Ra after 10 and 15 minutes, respectively. The self-cured (SC) specimen showed the highest and lowest values of Ra after 10 and 25 minutes, respectively. Finally, the 3D specimen showed the highest and lowest values of Ra after 5 and 20 minutes, respectively. Conclusion: After measuring the surface roughness of the three types of resins according to the grinding time of the dental automatic barrel finishing, the lowest Ra values for the HC, SC, and 3D specimens were measured after 15, 25, and 20 minutes, respectively. Therefore, we concluded that a limit on the grinding time of the resin using a dental automatic barrel finishing is needed.