• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권9호
• /
• pp.3276-3292
• /
• 2015

Relay-assisted D2D communication extends the communication range of the D2D pairs and helps users to form D2D pairs effectively. However, due to the introduction of the multi-hop relaying, the D2D communication has to occupy extra transmission time, which may decrease the efficiency of the communication system. In this paper, we propose a scheme to make node receive D2D signal and BS signal at overlapping time to improve the spectrum efficiency according to ZigZag decoding and successive-interference-cancellation (SIC). In this way, more data can be delivered during the same duration, thus the network throughput can be further improved. Numerical results verify the performance improvement of the proposed scheme when compared with a baseline scheme. Moreover, we expand the proposed scheme from one-hop relay scenario to multi-hop relay scenario.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권4호
• /
• pp.2196-2218
• /
• 2017

Multicast communication has been widely used in the Internet. However, multicast communication is vulnerable to DoS attack due to static router configuration. In this paper, HMC, a hopping multicast communication method based on SDN, is proposed to tackle this problem. HMC changes the multicast tree periodically and makes it difficult for the attackers to launch an accurate attack. It also decreases the probability of multicast communication being attacked by DoS and in the meanwhile, the QoS constrains are not violated. In this research, the routing problem of HMC is proven to be NP-complete and a heuristic algorithm is proposed to solve it. Experiments show that HMC has the ability to resist DoS attack on multicast route effectively. Theoretically, the multicast compromised probability can drop more than 0.6 when HMC is adopt. In addition, experiments demonstrate that HMC achieves shorter average multicast delay and better robustness compared with traditional method, and more importantly, it better defends DoS attack.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2016년도 추계학술발표대회
• /
• pp.309-312
• /
• 2016

Green Internet of Things (IoT) is the study and practice of eco-friendly sustainable computing. The basic goal of green computing is to reduce the use of materials and maximize energy efficiency with reliable and secure communications. The paper presents various technologies and issues regarding green IoT. It also studies the green Information and Communication Technology (ICT) such as green M2M, green Cloud Computing (CC), and green Data Center (DC). In addition, this paper mentions about the reliability in IoT Communication and and issues to achieve green IoT communication by applying efficient activity scheduling technique for energy saving. Finally, we propose the green IoT-Home Service (GIHS) model which provides efficient energy management in home automation system.

• 한국군사과학기술학회지
• /
• 제13권4호
• /
• pp.577-585
• /
• 2010

The Military Tactical Communication technology for effective network-centric warfare is developing. Targeting broadband wireless transmission, core technology for connection, and Transmission technology that secure survivability under High-speed Movement environment. On the one hand, Tactical data communication system that reflects military characteristic is developing on the base of Legacy communication equipment which is used in the field. Because almost every military units in the field have used voice to communicate which lower efficiency of operation, they have made effort to Substitute voice communication which delays military Operation Tempo to digital communication. The Communications environment of troops in Forward edge of battle field area is very poor. Especially in terms of limited frequency allocation and bandwidth. Therefore, improving the efficiency of frequency is essential for Military Tactical Communication. This paper is about The Data Compression Method for increase of Efficiency in Tactical Data Communication over Legacy Radios which are UHF, VHF, HF Radio. I proposed and proved the most efficient Data Compression Method that reflects military characteristic, after analyzing the experimentation, which simulate CAS(Close Air Support mission) data transmission between Pilot and TACP.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권9호
• /
• pp.4541-4554
• /
• 2019

This paper proposes a planar projection DV-hop location algorithm (PTCDV-hop) based on the LED semi-angle at half power (SAHP, which accounts for LED SAHP characteristics in visible light communication (VLC)) and uses the DV-hop algorithm for range-free localization. Distances between source nodes and nodes positioned in three-dimensional indoor space are projected onto a two-dimensional plane to reduce complexity. Circles are structured by assigning source nodes (projected onto the horizontal plane of the assigned nodes) to be centers and the projection distances as radii. The proposed PTCDV-hop algorithm then determines the position of node location coordinates using the trilateral-weighted-centroid algorithm. Simulation results show localization errors of the proposed algorithm are on the order of magnitude of a millimeter when three sources are used. The PTCDV-hop algorithm has higher positioning accuracy and stronger dominance than the traditional DV-hop algorithm.

• ETRI Journal
• /
• 제29권2호
• /
• pp.255-257
• /
• 2007

We propose an improved selective randomized load balancing (ISRLB) robust scheme under the hose uncertainty model for a special double-hop routing network architecture. The ISRLB architecture maintains the resilience properties of Valiant's load balancing and reduces the network cost/propagation delay in all other robust routing schemes.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 2004년도 추계종합학술대회 논문 초록집
• /
• pp.129-129
• /
• 2004

• International Journal of Advanced Culture Technology
• /
• 제8권4호
• /
• pp.51-57
• /
• 2020

A propeller-based seesaw system is a system that can represent one of axis of four propeller drones and its stabilization has been replaced by intelligent control system instead of often used control methods such as PID and state space. Today, robots are increasingly use machine learning methods to adapt to their environment and learn to perform the right actions. In this article, we propose a Q-learning-based approach to control the stability of a seesaw system with a propeller. From the experimental results that it is possible to fully learn the balance control of a seesaw system by correctly defining the state of the system, the actions to be performed, and the reward functions. Our proposed method solves the seesaw stabilization.

• 한국전자통신학회논문지
• /
• 제17권4호
• /
• pp.695-702
• /
• 2022

최근 들어 활발하게 연구되고 있는 스마트 철도 시스템은 통신기술과 정보기술 등 ICT(: Information & Communication Technology) 기반으로 자동화 단계를 넘어 지능화 단계로 진입하고 있다. 스마트 철도에 사용되고 있는 ICT 기술은 일반적으로 정보침해에 취약한 특성을 보여 다양한 정보보호 기술의 지원을 받고 있다. 고속/대량 운송 수단으로서 철도 시스템의 스마트화에는 그 기반을 이루는 ICT 기술을 위한 정보보호 방안의 강구가 필수적이다. 따라서 본 논문에서는 스마트 철도 통신기반의 잠재적 위험 요인을 살펴보고 이에 대응할 수 있는 정보보호 요소를 고찰하여 스마트 철도 통신을 위한 단계별 정보보호 방안의 필요성을 제시한다.

• International Journal of Advanced Culture Technology
• /
• 제8권1호
• /
• pp.19-25
• /
• 2020

This article describes the automated incubator designs for white mushrooms growing. Mongolia has a very long and cold winter, so the process of growing mushrooms is short. Therefore, we aim to design an automated incubator system that has created a favorable artificial environment for mushroom growing by examining the necessary conditions for mushroom growing. This system was designed to be able to hold for some time the required levels of soil moisture, air humidity, soil temperature, air temperature, and CO2 levels. This article presents the results of a system-based experiment that allows you to grow mushrooms for 30 days without human interference.