• Journal of The Korean Association For Science Education
• /
• v.31 no.2
• /
• pp.225-238
• /
• 2011

The purpose of this study was to investigate the effects of the instruction with question-creation training, compared with traditional science instructions. The instruction with question-creation training is to give students chances to make questions by themselves based on what they learned before the end of the classes. The four effects of the instruction were studied: students' achievement, metacognition, self-efficacy, and the level of the questions created by the students according to different proficiency levels. Research data was gathered from 65 second grade students at a middle school in Busan. The comparative group was instructed in traditional lecture-type teaching method. The experimental group was instructed with questioncreation training. Students in the experimental group were asked to make 3 questions by themselves and then, to solve their peers' questions about 15 minutes before the end of the classes. Both groups were divided into 3 groups by proficiency level according to the results of last semester's science test. Before the research, a metacognition test and a self-efficacy test were conducted. After the research, an achievement test, a question level test, a metacognition test, and a self-efficacy test were conducted and analyzed by t-test. The research data for question level was analyzed by one-way ANCOVA. The results of this study revealed that question-creation training has a positive effect on student's achievement, metacognition, and self-efficiency. It also showed most of the students have gained an ability to make higher-level questions regardless of their proficiency level due to the increased number of students who made higher-level questions. It also showed that most of the students could gain an ability to make higher-level questions regardless of their proficiency level from the fact that the number of students who made higher-level questions increased in every proficiency level.

• Journal of the Korean Electrochemical Society
• /
• v.19 no.3
• /
• pp.80-86
• /
• 2016

High Ni content layered oxide materials for the positive electrode in lithium-ion batteries have high specific capacity. However, their poor electrochemical and thermal stability at elevated temperature restrict the practical use. A small amount of $Al_2O_3$ was added to the mixture of transition metal hydroxide and lithium hydroxide. The $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ was simultaneously doped and coated with $Al_2O_3$ during heat-treatment. Electrochemical characteristics of modified $LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$ were evaluated by the galvanostatic cycling and the LSTA(linear sweep thermmametry) at the constant voltage conditions. The nano-sized $Al_2O_3$ added materials show better cycle performance at elevated temperature than that of micro-sized $Al_2O_3$. As the added amount of nano-$Al_2O_3$ increased, the thermal stability of electrode also enhanced, but the use of 2.5 mol% Al showed the best high temperature performance.

• Tuberculosis and Respiratory Diseases
• /
• v.66 no.5
• /
• pp.358-364
• /
• 2009

Background: The appropriate empirical antimicrobial choice in the treatment of community-acquired pneumonia (CAP) should be advocated by community-based information on the etiologic pathogens, their susceptibility to antimicrobials, clinical characteristics and outcomes. Jeju is a geographically isolated and identical region in Korea. However, there is no regional reference on adult CAP available. This study investigated the etiologic agents and clinical outcomes of adult patients diagnosed with CAP in Jeju, Korea, to help guide the empirical antimicrobial choice. Methods: A prospective observational study for one year in a referral hospital in Jeju, Korea. Patients diagnosed with CAP were enrolled with their clinical characteristics. Microbiological evaluations to identify the etiologic agents in the adult patients with CAP were performed with blood culture, expectorated sputum smear and culture, antibody tests for mycoplasma, chlamydophila, and antigen tests for legionella and pneumococcus. The clinical outcomes of the initial empirical treatment were analyzed. Results: Two hundred and three patients with mean age of 64 and 79 females were enrolled. Ten microbials from 90 cases (44.3%) were isolated and multiple isolates were confirmed in 30. Among the microbial isolates, S. pneumoniae (36.3%) was the most common, followed by M. pneumoniae (23.0%), C. pneumoniae (17.0%), S. aureus (9.6%) and P. aeruginosa (5.9%). The initial treatment failure (23.8%) was related to the isolation of polymicrobial pathogens, elevated inflammatory markers, and the presence of pleural effusion. Among the 30 isolates of S. pneumoniae, 16 (53.3%) were not susceptible to penicillin, and 19 isolates (63.3%) to erythromycin and clarithromycin. However, 29 isolates (96.7%) were susceptible to levofloxacin and ceftriaxone. Conclusion: S. pneumoniae, M. pneumoniae, S. aureus, and P. aeruginosa are frequent etiologic agents of adult CAP in Jeju, Korea. The clinical characteristics and antibiotic resistance should be considered when determining the initial empirical antimicrobial choice. Respiratory quinolone or ceftriaxone is recommended as an empirical antimicrobiotic in the treatment of adult CAP in Jeju, Korea.

• Journal of Bio-Environment Control
• /
• v.23 no.1
• /
• pp.1-10
• /
• 2014

This study analyzed the efficiency and uniformity by measuring the temperature change depending on the position in the chamber with the use of QRD (quadratic residue diffusor) microwave capable of inducing even sterilization by changing wavelength phase difference and enhancing the effect on low power. The results are summarized as follows: When irradiating 7 kW of QRD microwave, the highest efficiency was obtained at 35 cm height and in the center of the chamber. When irradiating 5 kW of QRD microwave, high efficiency was obtained on the sides of the chamber. When irradiating 3 kW of QRD microwave to Magnetrons 1, 2 and 3, the temperature uniformity according to the position of the bars was similar in the position of Bar 1 and 2. When irradiating 3 kW of QRD microwave to Magnetrons 3, 4 and 5, the temperature increased by approximately 10 to 20% in Bar 3. When irradiating 5, 7 and 9 kW of magnetron, the average temperature during the irradiation time increased in a similar form independently of the position of the bars. On the other hand, the efficiency of the chamber's proper internal volume was not necessarily proportional to the irradiation dose. When irradiating 3 kW of magnetron for 60 120 and 180 seconds, the temperature increased by approximately 5 to 10 at the edge of the chamber according to the irradiation position of magnetron. The temperature distribution for each position in the horizontal plane was relatively uniform, and the temperature had a tendency to slightly increase at the edge. When irradiating 5, 7 and 9 kW of magnetron, the temperature relatively evenly increased independently of the position of the bars. It was thought necessary to increase the irradiation dose by approximately 10 to 20% by considering the difference in temperature rise according to the position of magnetron.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.5
• /
• pp.141-151
• /
• 2016

The purpose of this study is to analyze the effects of the international marketing program (hereunder refer to as 'program') among the programs to support export conducted by the Small and Medium Business Administration. Especially, this study aims to analyze the effects of the program to increase in export for small - medium enterprises of less than 7 years (base on Item 2 of Article 2 of Act on Support for Small and Medium Enterprise Establishment). In order to achieve the purpose above, export result for 1,690 companies which participated through Gyeonggi District Small and Medium Business Administration in 2014 and 2015 were selected among the 843 companies that applied to the program through 12 local small and medium business administration in Korea and quantitative analysis on export performance of 1,690 companies is conducted in this study. In this study, main variables were selected by investigating advanced researches related to export performance of company based on the existing studies. And also, samples have been collected from companies in Gyeonggi area for this research since the companies in Gyeonggi area have been ranked as the 1s annually and the companies in Gyeonggi area employ the highest number of people per industry. As a result of actual proof analysis, Firstly, it was suggested that the program influences positively on the export performance of small-medium enterprises. Secondly, the program shows that the program influenced positively on the export performance of companies with less than 7 years. Lastly, it suggested that the program influenced more positively on the small - medium enterprises with less than 7years than normal small - medium enterprises. By adding the export performances of companies in Ulsan area of which the scale of import and export is the 2nd largest and companies in Seoul area, that participated in the program during the same period, I would like to conduct follow- up research if the significant results are obtained or not.

• Asia pacific journal of information systems
• /
• v.19 no.3
• /
• pp.125-150
• /
• 2009

RFID(Radio Frequency IDentification) is a wireless frequency of recognition technology that can be used to recognize, trace, and identify people, things, and animals using radio frequency(RF). RFID will bring about many changes in manufacturing and distributions, among other areas. In accordance with the increasing importance of RFID techniques, great advancement has been made in RFID studies. Initially, the RFID research started as a research literature or case study. Recently, empirical research has floated on the surface for announcement. But most of the existing researches on RFID adoption have been restricted to a dichotomous measure of 'adoption vs. non-adoption' or adoption intention. In short, RFID research is still at an initial stage, mainly focusing on the research of the RFID performance, integration, and its usage has been considered dismissive. The purpose of this study is to investigate which factors are important for the RFID adoption and implementation with organizational resources. In this study, the organizational resources are classified into either finance resources or IT knowledge resources. A research model and four hypotheses are set up to identify the relationships among these variables based on the investigations of such theories as technological innovations, adoption stage, and organizational resources. In order to conduct this study, a survey was carried out from September 27, 2008 until October 23, 2008. The questionnaire was completed by 143 managers and workers from physical distribution and manufacturing companies related to the RFID in South Korea. 37 out of 180 surveys, which turned out unfit for the study, were discarded and the remaining 143(adoption stage 89, implementation stage 54) were used for the empirical study. The statistics were analyzed using Excel 2003 and SPSS 12.0. The results of the analysis are as follows. First, the adoption stage shows that perceived benefits, standardization, perceived cost savings, environmental uncertainty, and pressures from rival firms have significant effects on the intent of the RFID adoption. Further, the implementation stage shows that perceived benefits, standardization, environmental uncertainty, pressures from rival firms, inter-organizational cooperation, and inter-organizational trust have significant effects on the extent of the RFID use. In contrast, inter-organizational cooperation and inter-organizational trust did not show much impact on the intent of RFID adoption while perceived cost savings did not significantly affect the extent of RFID use. Second, in the adoption stage, financial issues had adverse effect on both inter-organizational cooperation and the intent against the RFID adoption. IT knowledge resources also had a deterring effect on both perceived cost savings and the extent of the RFID adoption. Third, in the implementation stage, finance resources had a moderate effect on environmental uncertainty and extent of RFID use while IT knowledge resources had also a moderate effect on perceived cost savings and the extent of the RFID use. Limitations and future research issues can be summarized as follows. First, it is difficult to say that the sample is large enough to be representative of the population. Second, because the sample of this study was conducted among manufacturers only, it may be limited in analyzing fully the effect on the industry as a whole. Third, in consideration of the fact that the organizational resources in the RFID study require a great deal of researches, this research may deem insufficient to fulfill the purpose that it initially set out to achieve. Future studies using performance research are, therefore, needed to help better understand the organizational level of the RFID adoption and implementation.

• Journal of the Korean Society of Radiology
• /
• v.6 no.2
• /
• pp.93-98
• /
• 2012

Micro-computed tomography (microCT) is an important tool for preclinical vascular imaging, with micron-level resolution. This non-destructive means of imaging allows for rapid collection of 2D and 3D reconstructions to visualize specimens prior to destructive analysis such as pathological analysis. Objectives. The aim of this study was to suggest a method for ex vivo, postmortem examination of stented arterial segments with microCT. And ex vivo evaluation of stents such as bare metal or drug eluting stents on in-stent restenosis (ISR) in rabbit model was performed. The bare metal stent (BMS) and drug eluting stent (DES, paclitaxel) were implanted in the left or right iliac arteries alternatively in eight New Zealand white rabbits. After 4 weeks of post-implantation, the part of iliac arteries surrounding the stent were removed carefully and processed for microCT. Prior to microCT analysis, a contrast medium was loaded to lumen of stents. All samples were subjected to an X-ray source operating at 50 kV and 200 ${\mu}A$ by using a 3D isotropic resolution. The region of interest was traced and measured by CTAN analytical software. Objects being exposed to radiation had different Hounsfield unit each other with values of approximately 1.2 at stent area, 0.12 ~ 0.17 at a contrast medium and 0 ~ 0.06 at outer area of stent. Based on above, further analyses were performed. As a result, the difference of lengths and volumes between expanded stents, which may relate to injury score in pathological analysis, was not different significantly. Moreover, ISR area of BMS was 1.6 times higher than that of DES, indicating that paclitaxel has inhibitory effect on cell proliferation and prevent infiltration of restenosis into lumen of stent. And ISR area of BMS was higher ($1.52{\pm}0.48mm^2$) than that of DES ($0.94{\pm}0.42mm^2$), indicating that paclitaxel has inhibitory effect on cell proliferation and prevent infiltration of restenosis into lumen of stent. Though it was not statistically significant, it showed that the extent of neointema of mid-region of stents was relatively higher than that of anterior and posterior region in parts of BMS as showing cross-sectional 2-D image. suggest that microCT can be utilized as an accessorial tool for pathological analysis.

• Journal of the Korean Society of Radiology
• /
• v.8 no.7
• /
• pp.467-477
• /
• 2014

The purpose of this study is to offer data base for establishment of dental training x-ray generator based safety usage through surveying real radiation safety management state of radiation worker's in plan of operations that have dental training x-ray generators and use it. For it, comprehensive references were surveyed referring reports of current state of regulation technique development and domestic radiation safety evaluation and nuclear related legislation regarding radiation safety management of dental training x-ray generators. On the basis of it, questionnaires were filled in about respondent's general characteristic radiation safety manager's status current state of radiation safety management and the level of knowledge & consciousness. For the study, the survey was conducted to 224 people of radiation safety managers and university graduates training assistants and full-time professors who can treat dental training x-ray generators in education center. through this survey 95 questionnaires were used as analysis materials except the insufficient and omitted responses. As a method of analysis, the frequency and percentage were figured out with the general characteristics and safety manager's status. Chi-square test for frequency and correlation per question analysis and Pearson correlation analysis for crosslevel correlation were done with current state of radiation safety management and knowledge & consciousness level. As a result, running dental training x-ray generators was dealt with by 20's to 40's who have high education level over post undergraduate degree and major in dental hygienic. In addition, female have higher consciousness level for radiation safety management than male. It shows significal linear relation statistically(${\chi}^2$ >5, 0.1${\chi}^2$ >5, 0.3${\chi}^2$ >5, 0.3

• Asia pacific journal of information systems
• /
• v.19 no.1
• /
• pp.113-145
• /
• 2009

Recently, due to the globalization of the IT(Information Technology) market, devices and systems designed in one country are used in other countries as well. This phenomenon is becoming the key factor for increased interest on cross-cultural, or cross-national, research within the IT area. However, as the IT market is becoming bigger and more globalized, a great number of IT practitioners are having difficulty in designing and developing devices or systems which can provide optimal experience. This is because not only tangible factors such as language and a country's economic or industrial power affect the user experience of a certain device or system but also invisible and intangible factors as well. Among such invisible and intangible factors, the cultural characteristics of users from different countries may affect the user experience of certain devices or systems because cultural characteristics affect how they understand and interpret the devices or systems. In other words, when users evaluate the quality of overall user experience, the cultural characteristics of each user act as a perceptual lens that leads the user to focus on a certain elements of experience. Therefore, there is a need within the IT field to consider cultural characteristics when designing or developing certain devices or systems and plan a strategy for localization. In such an environment, existing IS studies identify the culture with the country, emphasize the importance of culture in a national level perspective, and hypothesize that users within the same country have same cultural characteristics. Under such assumptions, these studies focus on the moderating effects of cultural characteristics on a national level within a certain theoretical framework. This has already been suggested by cross-cultural studies conducted by scholars such as Hofstede(1980) in providing numerical research results and measurement items for cultural characteristics and using such results or items as they increase the efficiency of studies. However, such national level culture has its limitations in forecasting and explaining individual-level behaviors such as voluntary device or system usage. This is because individual cultural characteristics are the outcome of not only the national culture but also the culture of a race, company, local area, family, and other groups that are formulated through interaction within the group. Therefore, national or nationally dominant cultural characteristics may have its limitations in forecasting and explaining the cultural characteristics of an individual. Moreover, past studies in psychology suggest a possibility that there exist different cultural characteristics within a single individual depending on the subject being measured or its context. For example, in relation to individual vs. collective characteristics, which is one of the major cultural characteristics, an individual may show collectivistic characteristics when he or she is with family or friends but show individualistic characteristics in his or her workplace. Therefore, this study acknowledged such limitations of past studies and conducted a research within the framework of 'theoretically integrated model of user satisfaction and emotional attachment', which was developed through a former study, on how the effects of different experience elements on emotional attachment or user satisfaction are differentiated depending on the individual cultural characteristics related to a system or device usage. In order to do this, this study hypothesized the moderating effects of four cultural dimensions (uncertainty avoidance, individualism vs, collectivism, masculinity vs. femininity, and power distance) as suggested by Hofstede(1980) within the theoretically integrated model of emotional attachment and user satisfaction. Statistical tests were then implemented on these moderating effects through conducting surveys with users of four digital devices (mobile phone, MP3 player, LCD TV, and refrigerator) in three countries (US, Germany, and Russia). In order to explain and forecast the behavior of personal device or system users, individual cultural characteristics must be measured, and depending on the target device or system, measurements must be measured independently. Through this suggestion, this study hopes to provide new and useful perspectives for future IS research.

• Korean Journal of Poultry Science
• /
• v.39 no.4
• /
• pp.291-295
• /
• 2012

The use of methylacetamide (MA) as a cryoprotective agent for freezing Korean Native Black rooster Ogye semen was examined with artificial insemination. The diluted Ogye semen with HS-1 was subjected for 2 step dilution method of cryopreservation in which the final concentration of MA was adjusted to 7.5%. The sperm viability after thawing was reduced from $95.17{\pm}0.93%$ to $55.93{\pm}1.38%$ which was confirmed by live-death analysis based on Fluorescence-Activated Cell Sorting (FACS). The rates of fertilized eggs with fresh or frozen-thawed semen were reduced from $94.98{\pm}3.93%$ to $66.36{\pm}8.43%$ at day 7 with significant difference. However, the hatching rates of experiments at day 21 did not shown difference between $92.64{\pm}2.33%$ and $90.45{\pm}8.05%$ (P<0.05). With these results, the utilization of MA for freezing of Ogye spermatozoa could affect on viability of frozen-thawed semen but not on the fertility of lain eggs and hatchability of fertilized eggs and also provide possible tools of freezing for poultry genetic resource conservation.