• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.869-875
• /
• 2009

Safety is a big issue in the construction sites. For safe and secure management, tracking locations of construction resources such as labors, materials, machineries, vehicles and so on is important. The materials, machineries and vehicles could be controlled by computer, whereas the movement of labors does not have fixed pattern. So, the location and movement of labors need to be monitored continuously for safety. In general, Global Positioning System(GPS) is an opt solution to obtain the location information in outside environments. But it cannot be used for indoor locations as it requires a clear Line-Of-Sight(LOS) to satellites Therefore, indoor location monitoring system could be a convenient alternative for environments such as tunnel and indoor building construction sites. This paper presents a case study to investigate feasibility of Wi-Fi based indoor location monitoring system in construction site. The system is developed by using fingerprint map of gathering Received Signal Strength Indication(RSSI) from each Access Point(AP). The signal information is gathered by Radio Frequency Identification (RFID) tags, which are attached on a helmet of labors to track their locations, and is sent to server computer. Experiments were conducted in a shield tunnel construction site at Guangzhou, China. This study consists of three phases as follows: First, we have a tracking test in entrance area of tunnel construction site. This experiment was performed to find the effective geometry of APs installation. The geometry of APs installation was changed for finding effective locations, and the experiment was performed using one and more tags. Second, APs were separated into two groups, and they were connected with LAN cable in tunnel construction site. The purpose of this experiment was to check the validity of group separating strategy. One group was installed around the entrance and the other one was installed inside the tunnel. Finally, we installed the system inner area of tunnel, boring machine area, and checked the performance with varying conditions (the presence of obstacles such as train, worker, and so on). Accuracy of this study was calculated from the data, which was collected at some known points. Experimental results showed that WiFi-based indoor location system has a level of accuracy of a few meters in tunnel construction site. From the results, it is inferred that the location tracking system can track the approximate location of labors in the construction site. It is able to alert the labors when they are closer to dangerous zones like poisonous region or cave-in..

• Journal of Korean Society of Disaster and Security
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2024

In Korea, mountainous areas cover 60% of the land, leading to increased factors such as concentrated heavy rainfall and typhoons, which can result in debris flow and landslide. Despite the high risk of disasters like landslides and debris flow, there has been a tendency in most regions to focus more on post-damage recovery rather than preventing damage. Therefore, in this study, precise topographic data was constructed by conducting on-site surveys and drone measurements in areas where debris flow actually occurred, to analyze the risk zones for such events. The numerical analysis program RAMMS model was utilized to perform debris flow analysis on the areas prone to debris flow, and the actual distribution of debris flow was compared and analyzed to evaluate the applicability of the model. As a result, the debris flow generation area calculated by the RAMMS model was found to be 18% larger than the actual area, and the travel distance was estimated to be 10% smaller. However, the simulated shape of debris flow generation and the path of movement calculated by the model closely resembled the actual data. In the future, we aim to conduct additional research, including model verification suitable for domestic conditions and the selection of areas for damage prediction through debris flow analysis in unmeasured watersheds.

• Journal of Korean Society of Transportation
• /
• v.34 no.5
• /
• pp.437-448
• /
• 2016

Some previous researches suggested a transit trip destination inference method by constructing trip chains with incomplete(missing destination) smart card dataset obtained on the entry fare control systems. To explore the feasibility of the transit trip destination inference method, the transit trip chains are constructed from the pre-paid smart card tagging data collected in Busan on October 2014 weekdays by tracing the card IDs, tagging times(boarding, alighting, transfer), and the trip linking distances between two consecutive transit trips in a daily sequences. Assuming that most trips in the transit trip chains are linked successively, the individual transit trip destination zones are inferred as the consecutive linking trip's origin zones. Applying the model to the complete trips with observed OD reveals that about 82% of the inferred trip destinations are the same as those of the observed trip destinations and the inference error defined as the difference in distance between the inferred and observed alighting stops is minimized when the trip linking distance is less than or equal to 0.5km. When applying the model to the incomplete trips with missing destinations, the overall destination missing rate decreases from 71.40% to 21.74% and approximately 77% of the destination missing trips are the single transit trips for which the destinations can not be inferable. In addition, the model remarkably reduces the destination missing rate of the multiple incomplete transit trips from 69.56% to 6.27%. Spearman's rank correlation and Chi-squared goodness-of-fit tests showed that the ranks for transit trips of each zone are not significantly affected by the inferred trips, but the transit trip distributions only using small complete trips are significantly different from those using complete and inferred trips. Therefore, it is concluded that the model should be applicable to derive a realistic transit trip patterns in cities with the incomplete smart card data.

• Korean Journal of Environment and Ecology
• /
• v.24 no.3
• /
• pp.249-257
• /
• 2010

The purpose of this paper is to weigh the possibility of endangered Jang-hang wetland at the estuary of Han River to be included on the Ramsar List of Wetlands of International Importance and come up with ways to manage the wetland depending on its biotope patterns. The target area is located between Gimpo bridge and Isanpo I.C. with about $2.7km^2$ area. Through the analysis of RIS(Information Sheet for Ramsar Wetlands), it was known that the wetland is located on the sedimentary topography and formed as a result of sediment at the estuary of the river owing to the concentration of rainfall during summer. The vegetation environment in the area is divided into brackish water and fresh water areas depending on salinity. Rhizosphere soil(RS) of the area was analyzed to be Silt loam while bottom RS to be Sand loam. The plant ecology was composed of 52 families 135 species and 11 varieties and 146 types. Among indigenous species found are Salix koreensis, Phragmites communis and Miscanthus sacchariflorus. The analyzed results of the actual vegetation showed that willow community accounts for 37% of the area and rice field is 13.5%. As for animal ecology, total of 62 species and 25,977 individual wild birds were observed. After comparing and analyzing the RIS we compiled with the Ramsar Site designation standards, it turns out that the Jang-hang wetland meets criteria 1(biographic region), criteria 2,3 and 4(species and ecological communities) and criteria 5 and 6(water birds). Thus, Jang-hang wetland is eligible for the Ramsar site. As a result of establishing and evaluating the biotope types for setting management areas, Jang-hang wetland has a total of 13 different types, and the grade I represents 75.4% of the area while the grade III 0.8% of the land status. We categorized four management zones for the wetland depending on the biotope patterns - preservation, restoration, use and buffer zones and suggested management methods for each zone.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.5
• /
• pp.88-100
• /
• 2014

The purpose of the study is to analyze the regional effectiveness of wall-plantings by applying a biotope area ratio when wall-plantings are constructed in high density areas. For this, this study required a sample of the wall-planting's regional plan. Therefore, types of wall-planting were determined and applied to a sample site. Four types of wall-plantings were developed by formative features and functional features. Type "A" had simple and functional features, Type "B" had both mixed and functional features, Type "C" had both simple and landscape features and Type "D" had mixed and landscape features. Jung-gu District in Seoul was chosen as the sample site. Total investigations were performed three times for three months from June to August, 2011. Total green-able walls were located in 498 places with a total length of 8,449m and gross vertical area of $23,754.90m^2$. The classification results of total green-able walls by the four types were Type "A" at $1,936.65m^2$, Type "B" at $5,875.30m^2$, Type "C" at $12,487.85m^2$ and Type "D" at $3,455.10m^2$. This study analyzed how all facade areas of the green-able walls impacted the biotope area ratio at the site. First, the biotope area ratio regarding all the zones in Jung-gu District was defined as the gross biotope area ratio while the biotope area ratio regarding all of the artificial zones was defined as the net biotope area ratio. In the case of the gross biotope area ratio, 17.97% is current ration with a projected increase to 0.10% after wall-planting. In the case of the net biotope area ratio, 4.73% is the current ration with a projected increase to 0.11% after wall-planting. This 0.11% is about 2.28% of 4.73%. This study looks at all wall-plantings that have been constructed throughout a high density area to observe their impact on the improvement of ecological function therein. With consideration of the landscape value of the facade, the regional effectiveness of wall-planting is expected to increase even more.

• Journal of the Korean Society of Radiology
• /
• v.14 no.1
• /
• pp.15-22
• /
• 2020

PET(Positron Emission Tomography) devices are used as PET/CT or PET/MRI devices fused with the devices of CT or MRI for obtaining anatomical information. Therefore, the devices are constructed in circular ring-type structure whose length of gantry(the main part of filming) becomes wider and the interior depth becomes longer in comparison to other common medical equipments. scintillator, one of the components in PET devices, is inside the gantry, and as it is consisted of crystal which is sensitive to the change of temperature and humidity, large temperature change can cause the scintillator to be damaged. Though scintillator located inside the gantry maintains temperature and humidity with a thermo-hygrostat, changes in temperature and humidity are expected due to structural reasons. The output value was measured by dividing the inside of the gantry of the PET/CT device into six zones, each of which an Adafruit BME 280 temperature and humidity sensor was placed at. A thermo-hygrostat keeps the temperature and humidity constant in the PET/CT room. As the measured value of temperature and humidity of the sensor was obtained, the measured value of temperature and humidity appeared in the thermohygrostat was taken at the same time. Comparing the average measured values of temperature and humidity measured at each six zones with the average values of the thermo-hygrostat results in a difference of 2.71℃ in temperature and 21.5% in humidity. The measured temperature and humidity of PET Gantry is out of domestic quality control range. According to the results of the study, if there is continuous change in temperature and humidity in the future, the aging of the scintillator mounted in the PET Gantry is expected to be aging, so it is necessary to find a way to properly maintain the temperature and humidity inside the Gantry structure.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.2
• /
• pp.56-72
• /
• 2015

This study area for this research was the Taereung of the 2009 World Heritage-listed Royal Tombs of the Joseon Dynasty. The Taereung space was divided into that of the royal tomb space, religious service space, transposition space and entry space. The original vegetation is assumed to have been planted at the right, left and backside of the tomb based on historical research literature. Regarding the original vegetation landscape of Taeneung, it was assumed that Pinus densiflora was distributed around the tomb lines and tomb space, Pinus densiflora was distributed in the religion services space and transposition and Alnus japonica was distributed in the entry space. By the present status of vegetation in Taeneung, the Pinus densiflora forest was the widest area with 50.3% with the broadleaf forest at 33.7%. Quercus aliena, Quercus acutissima, and Quercus mongolica were the main species found in Taeneung. The planting area was 7.9% and Pinus densiflora were the main species planted. To analyze the plant community structure of Taeneung, 108 plots were set and divided into four spaces. The importance of the percentage of those districts was analyzed on a spatial basis and it was found that the current dominant species of the tomb space was Pinus densiflora. However, as Pinus densiflora began dying out, the power of Quercus acutissima increased and an ecological succession from the Pinus densiflora forest to Quercus aliena forest was made. In the spaces of religious services and transposition, Pinus densiflora was decreasing and Quercus spp. was expanded. In the space of entry, the dominant species were Pinus densiflora and Quercus aliena, Pinus densiflora and Quercus aliena. As soil of this area is argillaceous, Pinus densiflora is expected to disappear in the end. The prior vegetation(assumed) and present vegetation of Taeneung were compared and analyzed and a goal of vegetation management and the way in which to manage vegetation were suggested. The goal of vegetation landscape management was to analyze ecological characteristics and vegetation changes, maintain and restore a landscape suitable for historical landscape forests by space. About the space of the tomb, Pinus densiflora forests and Pinus densiflora planting zones forests should be maintained and there should be efforts to restore and manage the Pinus densiflora forests, instead of the Quercus spp. forests. About the space of religious services, Pinus densiflora forests and Pinus densiflora planting zones should be maintained and managed and there should be efforts to restore and manage Pinus densiflora forests to replace Quercus spp. Pinus densiflora forests in the space of transposition should be maintained and managed and Pinus densiflora forests should be restored to replace Quercus spp. trees. Alnus japonica forests should be restored in the space of entry.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.2
• /
• pp.28-41
• /
• 2023

The objective of the study was to develop an Urban Windway Forest Creation Planning Technique for the Improvement of the Urban Environment using the case of Daejeon Metropolitan City. Through a spatial analysis of fine dust and heat waves, a basin zone, in which the concentration was relatively serious, was derived, and an area with the potential of cold air flow was selected as the target area for the windway forest development by analyzing the climate and winds in the relevant zone. Extreme fine dust areas included the areas of the Daejeon Industrial Complex Regeneration Business District in Daedeok-gu and Daedeok Techno Valley in Yuseong-gu. Heat wave areas included the areas of Daedeok industrial Complex in Moksang-dong, the Daejeon Industrial Complex Regeneration Business District in Daehwa-dong, and the high-density residential area in Ojeong-dong. As a result of measuring the wind speeds in Daejeon with an Automatic Weather System, the average wind speeds during the day and night were 0.1 to 1.7 m/s,, respectively. So, a plan of for a windway forest that smoothly induces the movement of cold air formed in outer forests at night is required. The fine dust/heat wave intensive management zones of Daejeon Metropolitan City were Daejeoncheon, Yudeungcheon, Gapcheon-Yudeungcheon, and Gapcheon. The windway forest formation plan case involved the old city center of Daejeon Metropolitan City among the four zones, the Gapcheon-Yudeungcheon area, in which the windway formation effect was presumed to be high. The Gapcheon-Yudeungcheon area is a downtown area that benefits from the cold and fresh air generated on Mt. Gyejok and Mt. Wuseong, which are outer forests. Accordingly, the windway forest was planned to spread the cold air to the city center by connecting the cold air generated in the Seosa-myeon forest of Mt. Gyejok and the Namsa-myeon forest of Mt. Wuseong through Gapcheon, Yudeungcheon, and street forests. After selecting the target area for the wind ventilation forest, a climate map and wind formation function evaluation map were prepared for the area, the status of variation wind profiles (night), the status of fine dust generation, and the surface temperature distribution status were grasped in detail. The wind ventilation forest planning concept and detailed target sites by type were identified through this. In addition, a detailed action plan was established according to the direction of creation and setting of the direction of creation for each type of wind ventilation forest.

• Journal of agricultural medicine and community health
• /
• v.37 no.1
• /
• pp.36-51
• /
• 2012

Objectives: This study was conducted to implement Health Plus Happiness Plus projects in Gyeongsangnam-Do and assess the policy implications of initiatives to address regional health inequalities. Methods: Health Plus Happiness Plus projects were started as strategies to address regional health inequalities in Gyeongsangnam-Do. The principles of these projects are taken from the Health Action Zones initiatives in England: participation, partnership, resource concentration in project areas. The time period for these projects is from 2010 to 2017, and the total budget is 5.6 billion won. In 2010, a 6.8 hundred million won total budget was invested in 17 project areas. Such investments fell into four broad categories: establishment of the means and local framework; survey development to analyze the health determinants; development of an education and training center; and establishment of a technical support center. Results: Education and training programs for practitioners and coordinators were provided, and project teams and project promotion committees were established in project areas. Health survey result briefing meetings were held, and 17 health committees were established in project areas. Conclusions: Health Plus Happiness Plus projects have some problems in relation to participation and partnerships, however, if these principled projects are performed continuously, they will contribute to a reduction of standardized mortality rate and regional health inequalities in Gyeongsangnam-Do and the improvement of residents' well-being in project areas.

• Restorative Dentistry and Endodontics
• /
• v.34 no.1
• /
• pp.51-60
• /
• 2009

The purpose of this study was to perform quantitative comparisons of water permeable zones in both the adhesive and the hybrid layer before and after thermo cycling in order to assess the integrity of the bonding interface. Twenty eight flat dentin surfaces were bonded with a light-cured composite resin using one of four commercial adhesives [OptiBond FL (OP), AdheSE (AD), Clearfil SE Bond (CL). and Xeno III (XE)]. These were sectioned into halves and subsequently cut to yield 2-mm thick specimens; one specimen for control and the other subjected to thermocycling for 10,000 cycles. After specimens were immersed in ammoniacal silver nitrate for 24 h and exposed to a photo developing solution for 8 h, the bonded interface was analyzed by scanning electron microscopy (SEM) and wavelength dispersive spectrometry (WDS) at five locations per specimen. Immediately after bonding. the adhesive layer of OP showed the lowest silver uptake, followed by CL, AD. and XE in ascending order (p < 0.0001); the hybrid layer of CL had the lowest silver content among the groups (p = 0.0039). After thermocycling, none of the adhesives manifested a significant increase of silver in either the adhesive or the hybrid layer. SEM demonstrated the characteristic silver penetrated patterns within the interface. It was observed that integrity of bonding was well maintained in OP and CL throughout the thermocycling process. Adhesive-tooth interfaces are vulnerable to hydrolytic degradation and its permeability varies in different adhesive systems, which may be clinically related to the restoration longevity.