• Composites Research
• /
• v.37 no.3
• /
• pp.209-214
• /
• 2024

Graphene oxide (GO), known for its high stiffness, thermal conductivity, and electrical conductivity, is being utilized as a reinforcement in nanocomposite materials. This study evaluates the mechanical properties of epoxy nanocomposites incorporating GO and edge modified GO (E-GO), which has hydroxyl groups substituted only on its edges. GO/E-GO was uniformly dispersed in epoxy resin using ultrasonic dispersion, and mechanical properties were assessed through tensile testing. The results showed that the addition of nanoparticles increased both tensile strength and toughness. The tensile strength of the epoxy without nanoparticles was 74.4 MPa, while the highest tensile strength of 90.7 MPa was observed with 0.3 wt% E-GO. Additionally, the modulus increased from 2.55 GPa to 3.53 GPa with the addition of nanoparticles. Field emission scanning electron microscopy of the fracture surface revealed that the growth of cracks was impeded by the nanoparticles, preventing complete fracture and causing the cracks to split in multiple directions. E-GO, with surface treatment only on the edges, exhibited higher mechanical properties than GO due to its superior dispersion and surface treatment effects. These results highlight the importance of nanoparticle surface treatment in developing high-performance nanocomposite materials.

• Annals of Occupational and Environmental Medicine
• /
• v.35
• /
• pp.24.1-24.15
• /
• 2023

Background: The construction workers are vulnerable to fatigue due to high physical workload. This study aimed to investigate the relationship between overwork and heart rate in construction workers and propose a scheme to prevent overwork in advance. Methods: We measured the heart rates of construction workers at a construction site of a residential and commercial complex in Seoul from August to October 2021 and develop an index that monitors overwork in real-time. A total of 66 Korean workers participated in the study, wearing real-time heart rate monitoring equipment. The relative heart rate (RHR) was calculated using the minimum and maximum heart rates, and the maximum acceptable working time (MAWT) was estimated using RHR to calculate the workload. The overwork index (OI) was defined as the cumulative workload evaluated with the MAWT. An appropriate scenario line (PSL) was set as an index that can be compared to the OI to evaluate the degree of overwork in real-time. The excess overwork index (EOI) was evaluated in real-time during work performance using the difference between the OI and the PSL. The EOI value was used to perform receiver operating characteristic (ROC) curve analysis to find the optimal cut-off value for classification of overwork state. Results: Of the 60 participants analyzed, 28 (46.7%) were classified as the overwork group based on their RHR. ROC curve analysis showed that the EOI was a good predictor of overwork, with an area under the curve of 0.824. The optimal cut-off values ranged from 21.8% to 24.0% depending on the method used to determine the cut-off point. Conclusion: The EOI showed promising results as a predictive tool to assess overwork in real-time using heart rate monitoring and calculation through MAWT. Further research is needed to assess physical workload accurately and determine cut-off values across industries.

• The Journal of Korean Academy of Sensory Integration
• /
• v.21 no.3
• /
• pp.39-53
• /
• 2023

Objective : The purpose was the effect of sensory integration therapy combined with an eye tracker on the sensory processing and visual perception of children with developmental disabilities. Methods : It was a single-subject study with a multiple baseline design between subjects, and the intervention applied sensory integration therapy combined with an eye tracker. Visual-motor speed and saccadic eye movements were assessed at each session of baseline and intervention periods. As pre- and post-evaluation, sensory profile, Korean-Developmental Test of Visual Perception and Trail Making Test were conducted. The results of each session evaluation and pre- and post-evaluation researched the effectiveness of the intervention through visual analysis and trend line analysis. Results : As a result of the evaluation for each session, the slope of the trend line for all children in visual-motor speed and saccadic eye movement increased sharply during the intervention compared to the baseline. As a result of the pre- and post-evaluation, the sensory processing of movement, body position, and visual changed from more than that of peers to a level similar to that of peers. In visual perception, all children's ability of Visual Closure increased. As a result of Trail Making Test conducted to confirm the improvement of children's visual tracking and visual-motor abilities, all children showed a decrease in performance time after the test compared to before. Conclusion : It was confirmed that sensory integration therapy combined with an eye tracker for developmental disabilities has effect on sensory processing and visual perception. It is expected to play an important role clinically as it can stimulate children's interest and motivation in line with recent technological improvements and the spread of smart devices.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.2
• /
• pp.243-252
• /
• 2024

Among the Foley sound generation models that have recently begun to be studied, a sound generation technique using the Vector Quantized-Variational AutoEncoder (VQ-VAE) structure and generation model such as Pixelsnail are one of the important research subjects. On the other hand, in the field of deep learning-based acoustic signal compression, residual vector quantization technology is reported to be more suitable than the conventional VQ-VAE structure. Therefore, in this paper, we aim to study whether residual vector quantization technology can be effectively applied to the Foley sound generation. In order to tackle the problem, this paper applies the residual vector quantization technique to the conventional VQ-VAE-based Foley sound generation model, and in particular, derives a model that is compatible with the existing models such as Pixelsnail and does not increase computational resource consumption. In order to evaluate the model, an experiment was conducted using DCASE2023 Task7 data. The results show that the proposed model enhances about 0.3 of the Fréchet audio distance. Unfortunately, the performance enhancement was limited, which is believed to be due to the decrease in the resolution of time-frequency domains in order to do not increase consumption of the computational resources.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.2
• /
• pp.493-498
• /
• 2024

With the rapid advancement of generative artificial intelligence technology, there is growing interest in how to utilize it in practical applications. Additionally, the importance of prompt engineering to generate results that meet user demands is being newly highlighted. Exploring the new possibilities of generative AI can hold significant value. This study aims to utilize ChatGPT 4.0, a leading generative AI, to propose an effective method for evaluating user experience through the analysis of online customer review data. The user experience evaluation method was based on the six-layer elements of user experience: 'functionality', 'reliability', 'usability', 'convenience', 'emotion', and 'significance'. For this study, a literature review was conducted to enhance the understanding of prompt engineering and to grasp the clear concept of the user experience hierarchy. Based on this, prompts were crafted, and experiments for the user experience evaluation method were carried out using the analysis of collected online customer review data. In this study, we reveal that when provided with accurate definitions and descriptions of the classification processes for user experience factors, ChatGPT demonstrated excellent performance in evaluating user experience. However, it was also found that due to time constraints, there were limitations in analyzing large volumes of data. By introducing and proposing a method to utilize ChatGPT 4.0 for user experience evaluation, we expect to contribute to the advancement of the UX field.

• Korean Journal of Radiology
• /
• v.21 no.7
• /
• pp.869-879
• /
• 2020

Objective: To evaluate the performance of a convolutional neural network (CNN) model that can automatically detect and classify rib fractures, and output structured reports from computed tomography (CT) images. Materials and Methods: This study included 1079 patients (median age, 55 years; men, 718) from three hospitals, between January 2011 and January 2019, who were divided into a monocentric training set (n = 876; median age, 55 years; men, 582), five multicenter/multiparameter validation sets (n = 173; median age, 59 years; men, 118) with different slice thicknesses and image pixels, and a normal control set (n = 30; median age, 53 years; men, 18). Three classifications (fresh, healing, and old fracture) combined with fracture location (corresponding CT layers) were detected automatically and delivered in a structured report. Precision, recall, and F1-score were selected as metrics to measure the optimum CNN model. Detection/diagnosis time, precision, and sensitivity were employed to compare the diagnostic efficiency of the structured report and that of experienced radiologists. Results: A total of 25054 annotations (fresh fracture, 10089; healing fracture, 10922; old fracture, 4043) were labelled for training (18584) and validation (6470). The detection efficiency was higher for fresh fractures and healing fractures than for old fractures (F1-scores, 0.849, 0.856, 0.770, respectively, p = 0.023 for each), and the robustness of the model was good in the five multicenter/multiparameter validation sets (all mean F1-scores > 0.8 except validation set 5 [512 x 512 pixels; F1-score = 0.757]). The precision of the five radiologists improved from 80.3% to 91.1%, and the sensitivity increased from 62.4% to 86.3% with artificial intelligence-assisted diagnosis. On average, the diagnosis time of the radiologists was reduced by 73.9 seconds. Conclusion: Our CNN model for automatic rib fracture detection could assist radiologists in improving diagnostic efficiency, reducing diagnosis time and radiologists' workload.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.3
• /
• pp.77-85
• /
• 2024

In this dissertation, a we designed and implemented a patrol robot that integrates a thermal imaging camera, speed dome camera, PTZ camera, radar, lidar sensor, and smartphone. This robot has the ability to monitor and respond efficiently even in complex environments, and is especially designed to demonstrate high performance even at night or in low visibility conditions. An orbital movement system was selected for the robot's mobility, and a smartphone-based control system was developed for real-time data processing and decision-making. The combination of various sensors allows the robot to comprehensively perceive the environment and quickly detect hazards. Thermal imaging cameras are used for night surveillance, speed domes and PTZ cameras are used for wide-area monitoring, and radar and LIDAR are used for obstacle detection and avoidance. The smartphone-based control system provides a user-friendly interface. The proposed robot system can be used in various fields such as security, surveillance, and disaster response. Future research should include improving the robot's autonomous patrol algorithm, developing a multi-robot collaboration system, and long-term testing in a real environment. This study is expected to contribute to the development of the field of intelligent surveillance robots.

• Therapeutic Science for Rehabilitation
• /
• v.13 no.2
• /
• pp.69-84
• /
• 2024

Objective : This study aimed to categorize the lifestyles of older adults into two types - healthy and unhealthy, and use machine learning to identify the personal values that influence these lifestyles. Methods : This cross-sectional study targeting middle-aged and older adults (55 years and above) living in local communities in South Korea. Data were collected from 300 participants through online surveys. Lifestyle types were dichotomized by the Yonsei Lifestyle Profile (YLP)-Active, Balanced, Connected, and Diverse (ABCD) responses using latent profile analysis. Personal value information was collected using YLP-Values (YLP-V) and analyzed using machine learning to identify the relative importance of personal values on lifestyle types. Results : The lifestyle of older adults was categorized into healthy (48.87%) and unhealthy (51.13%). These two types showed the most significant difference in social relationship characteristics. Among the machine learning models used in this study, the support vector machine showed the highest classification performance, achieving 96% accuracy and 95% area under the receiver operating characteristic (ROC) curve. The model indicated that individuals who prioritized a healthy diet, sought health information, and engaged in hobbies or cultural activities were more likely to have a healthy lifestyle. Conclusion : This study suggests the need to encourage the expansion of social networks among older adults. Furthermore, it highlights the necessity to comprehensively intervene in individuals' perceptions and values that primarily influence lifestyle adherence.

• Journal of Radiation Industry
• /
• v.17 no.1
• /
• pp.19-32
• /
• 2023

The amount of radioactive waste is expected to dramatically increase with decommissioning of nuclear power plants such as Kori-1, the first nuclear power plant in South Korea. Accurate nuclide analysis is necessary to manage the radioactive wastes safely, but research on verification of radionuclide analysis has yet to be well established. This study aimed to develop the technology that can verify the results of radionuclide analysis based on artificial intelligence. In this study, we propose an anomaly detection algorithm for inspecting the analysis error of radionuclide. We used the data from 'Updated Scaling Factors in Low-Level Radwaste' (NP-5077) published by EPRI (Electric Power Research Institute), and resampling was performed using SMOTE (Synthetic Minority Oversampling Technique) algorithm to augment data. 149,676 augmented data with SMOTE algorithm was used to train the artificial neural networks (classification and anomaly detection networks). 324 NP-5077 report data verified the performance of networks. The anomaly detection algorithm of radionuclide analysis was divided into two modules that detect a case where radioactive waste was incorrectly classified or discriminate an abnormal data such as loss of data or incorrectly written data. The classification network was constructed using the fully connected layer, and the anomaly detection network was composed of the encoder and decoder. The latter was operated by loading the latent vector from the end layer of the classification network. This study conducted exploratory data analysis (i.e., statistics, histogram, correlation, covariance, PCA, k-mean clustering, DBSCAN). As a result of analyzing the data, it is complicated to distinguish the type of radioactive waste because data distribution overlapped each other. In spite of these complexities, our algorithm based on deep learning can distinguish abnormal data from normal data. Radionuclide analysis was verified using our anomaly detection algorithm, and meaningful results were obtained.

• Journal of Advanced Technology Convergence
• /
• v.3 no.3
• /
• pp.9-15
• /
• 2024

This paper details research on the optimized design and fabrication of a 4x4 microstrip array antenna intended for X-Band applications. The study focuses on achieving the desired resonance frequency and gain by modifying the microstrip patch and array antenna parameters, including substrate type and patch size. It presents results from designing and fabricating a 4x4 array antenna with optimum substrate materials to enhance X-Band resonance characteristics and gain. The antenna dimensions are 10mm(W)x7.4mm(L)x 0.79mm(H), with an Rogers RO 4350B dielectric substrate (ε_r=3.54) and an inset-fed feeding method to minimize antenna size. Both the single patch and 4x4 array antennas demonstrated stable SWR (<1.5) and a gain of 18.5dBi at the target frequency of 10.3GHz in simulations. The fabricated antenna showed performance consistent with simulation results. This antenna design is suitable for X-Band applications, including military, satellite communications, and biomedical fields.