• Korean Management Science Review
• /
• v.13 no.1
• /
• pp.57-70
• /
• 1996

This paper develops an adaptive scheduling policy for flexible manufacturing systems. The inductive learning methodology used for constructing this state-dependent scheduling policy provides and understanding of the relative importance of the various system parameters in determining the appropriate scheduling rule. Experimental studies indicated the superiority of the suggested approach over the alternative approach involving the repeated application of a single scheduling rule for randomly generated test problems as well as a real system, and under both stationary and nonstationary conditions. In particular, its relative performance improves further when there are frequent disruptions, and when disruptions are caused by the introduction of tiiight due date jobs, one of the most common surces of disruptions in most manufacturing systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.1111-1116
• /
• 1993

In this study, we discuss the design of the expert system for the scheduling of the FMC(Flexible Manufacturing Cell) consisting of the several versatile machines. Due to the NP property, the scheduling problem of several machine FMC is very complex task. Thus we proposed the two heuritstic shceduling algorithms for solving the problem and constituted the algorithm based of solving the problem and constituted the algorithm base of ISS(Intelligent Scheduling System) using them. By the rules in the rule base, the best alternative among various algorithms in algorithm base is selected and applied in controlling the FMC. To show the efficiency of ISS, the scheduling output of ISS and the existent dynamic dispatching rule were tested and compared. The results indicate that the ISS is superior to the existent dynamic dispatching rules in various performance indexes.

• Journal of applied mathematics & informatics
• /
• v.18 no.1_2
• /
• pp.383-391
• /
• 2005

The paper is devoted to some flow shop scheduling problems, where job processing times are defined by functions dependent on their positions in the schedule. An example is constructed to show that the classical Johnson's rule is not the optimal solution for two different models of the two-machine flow shop scheduling to minimize makespan. In order to solve the makespan minimization problem in the two-machine flow shop scheduling, we suggest Johnson's rule as a heuristic algorithm, for which the worst-case bound is calculated. We find polynomial time solutions to some special cases of the considered problems for the following optimization criteria: the weighted sum of completion times and maximum lateness. Some furthermore extensions of the problems are also shown.

• Korea Journal of Hospital Management
• /
• v.16 no.4
• /
• pp.161-182
• /
• 2011

In today's competitive dental markets, it is of paramount importance to improve service quality and at the same time to use scarce resource efficiently. In this study, we present appointment policies and scheduling rules for private dental clinics to reduce the waiting time of patients and to increase the revenue by utilizing resource more effectively. This study validates the proposed appointment policies and scheduling rules based on simulation models. We show that the bottleneck-based appointment policy is the most effective among appointment policies, followed by the multiple-block appointment one. The shortest processing time among scheduling rules contributes most to the performance of the appointment system.

• IE interfaces
• /
• v.10 no.3
• /
• pp.145-153
• /
• 1997

This paper deals with constructing a scheduling system for a mold manufacturing factory. The scheduling system is composed of 4 submodules such as pre-processor, neural network training, neural networks and simulation. Pre-processor analyzes the condition of workshop and generates input data to neural networks. Network training module is performed by using the condition of workshop, performance measures, and dispatching rules. Neural networks module presents the most optimized dispatching rule, based on previous training data according to the current condition of workshop. Simulation module predicts the earliest completion date of a mold by forward scheduling with the presented dispatching rules, and suggests a possible issue date of a material by backward tracking. The system developed shows a great potential when applied in real mold factory for automotive parts.

• Journal of the Korean Society of Industry Convergence
• /
• v.12 no.1
• /
• pp.19-25
• /
• 2009

We suggest and evaluate a dynamic scheduling rule of machines and material handling systems for on-line operation in job shop type Flexible Manufacturing System. Alternating status should be able to take operation scheduling procedures and without delay in dynamic industrial environments effectively. The interaction(SPT-NS, SPT-QSNS, SPT-NUJ, EDD-NS, EDD-QSNS, EDD-NUJ, CR-NS, CR-QSNS, CR-NUJ) between machine operation scheduling and AGV dispatching rule were also studied in this research. The performance evaluation which was obtained from DSS compares the performance of Flow time, and Empty to loaded travel ratio. It is Compared with the best rules & two system.

• Korean Management Science Review
• /
• v.10 no.1
• /
• pp.171-192
• /
• 1993

In this paper, a rule for dispatching operations, named the Most Dissimilar Resources (MDR) dispatching rule is presented. The MDR dispatching rule has been designed to maximize utilization of resources in a resource-constrained job shop with general precedence constraints. In shown that solving the above scheduling problem with the MDR dispatching rule is equivalent to multiple solving of the maximum clique problem. A graph theoretic approach is used to model the latter problem. The pairwise counting heuristic of computational time complexity O(n$^{2}$) is developed to solve the maximum clique problem. An attempt is made to combine the MDR dispatching rule with the existing look-ahead dispatching rules. Computational experience indicates that the combined MDR dispatching rules provide solutions of better quality and consistency than the dispatching rules tested in a resource-constrained job shop.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.27 no.2
• /
• pp.17-23
• /
• 2004

Changes in manufacturing system are those that occur during production and cause the systems to behave unpredictably. So scheduling problem in this dynamic Industrial environments is very complex. The main concept of this dissertation is to continuously monitor a manufacturing system status(Rate of Prior Job, Rate of Large Job, Rate of Shortest due date Job, Job Interval Time) and detect or predict a change so that scheduling system will react by modifying production schedule(dispaching rule) to lessen the effects of this change.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.10a
• /
• pp.100-107
• /
• 1999

무인 운반차량 시스템 (AGV System) 의 이용도가 날로 증가함에 따라 시스템의 최적화 및 운영 방법에 관한 많은 연구가 진행되고 있다. 이에 본 연구에서는 AGV System에서 사용하는 Routing 및 Scheduling 정책들을 연구하고 이를 개선할 수 있는 새로운 방안을 모색한 후, 컴퓨터 모델링 기법을 이용한 보다 객관적인 시뮬레이션을 수행하여 최적의 AGV System과 그에 적합한 운영 정책을 제시하는데 그 목적이 있다. 따라서 본 논문은 크게 AGV Routing 과 Scheduling에 관한 연구로 나누어진다. AGV Routing은 AGV의 이동경로를 설정하는 것으로서 충돌 방지 (Collision Avoidance)와 최단경로 탐색 (Minimal Cost Path Find) 이라는 두 개의 주요 알고리즘으로 이루어진다. AGV Scheduling 은 장비의 공정시간과 AGV의 Loading/Unloading, Charging 시간으로 인해 불규칙한 Event 가 일어났을 경우 AGV 각각의 Jop을 알맞게 선정해주는 정책을 말하며 일반적으로 AGV Selection Rule, Charging Rule이 여기에 속한다. 본 연구에서는 이러한 알고리즘들이 반영된 AGV System을 컴퓨터 모델로 구축하여, 기존 시스템에서 사용되고 있는 여러 운영 정책들의 문제점들을 분석하였으며, Multiple AGV System을 최적화 시키는 운영 정책이 보다 객관적으로 제시되었다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.310-313
• /
• 1996

Mathematical programming method for finding optimal solution of job shop scheduling is inadequate to real situation because fo too much computation time. In contrast, dispatching rule is helpful for reducing compuation time but is not guaranted to find optimal solution. The purpose of this paper is to develop a new dispatching rule and procedure to minimize mean flow time whose result is near the optimal solution for job shop scheduling. First step is to select machine which have shortest finishing operation time among the schedulable operations. Second step is to select operation with regard to estimated remaining operation time. The suggested rule is compared with nondelay and MWKR rule for three examples, and is confirmed to be most effective to minimize mean flow time.