• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.548-555
• /
• 2003

Customer satisfaction level is usually measured in terms of price, quality, customization, after-sale-service, product variety etc. Each finn sets up a distinctive production/marketing strategy to gain competitive advantage by prioritizing the customer satisfaction measures. The market differentiation strategy directly results in supply chain performance such as lead time, inventory, customer fill rate and market share. Product proliferation desirable in customization sense often conflicts the economies of scale effect in production side. This paper focuses the relationship between product variety and market share. Specifically, we investigate how introduction of new product affects the current market share, i.e.,) formation of customer preference and provide some insight into the optimal range of product variety.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.613-616
• /
• 2007

A pilot scale circulating fluidized bed for refuse derived fuel is developed and constructed in order to demonstrate efficient and safe utilization of waste fuel. The capacity of the facility is 8 steam tons per hour with the steam quality of $450^{\circ}C$ and 38atm. The quantity and the quality of the produced steam is sufficient to produce 1MWe power capacity. The test operation proved the high combustion efficiency of 99% and up. The emissions of NOx, SOx in flue gas are below 100, 60ppm respectively with out any emission control. HCl emissions were above 400ppm at the combustor exit but reduced below 10ppm after scrubber.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.29 no.1
• /
• pp.101-112
• /
• 2004

Customer satisfaction level is usually measured in terms of price, qualify, customization, after-sale-service, product variety etc. Each firm sets up a distinctive production/marketing strategy to gain competitive advantage by Prioritizing the customer satisfaction measures. The market differentiation strategy directly results in supply chain performance such as lead time, inventory, customer fill rate and market share. Product proliferation desirable in customization sense often conflicts the economies of scale effect in production side. This paper focuses the relationship between product variety and market share. Specifically, we investigate how introduction of new product affects the current market share, i.e., formation of customer preference and provide some insight into the optimal range of product variety.

• 한국균학회소식:학술대회논문집
• /
• 2018.05a
• /
• pp.51-51
• /
• 2018

The application of recombinant DNA technology has been remarkable and nearly replaced commonly used traditional methods. Traditional industrial microbiology long depended on the discovery of valuable strains and mutagenesis of such strains to improve its secretion capacity of enzymes and secondary metabolites on the industrial scale. Commodities included industrial enzymes and biopharmaceuticals. The purpose of genome manipulation by the crossing of different strains or genetic recombination of naked DNA to the genome is of increased production of valuable metabolites. We optimized a transformation method to either for removal of innate genes, introduction of heterologous genes, or combination of both. We have been used selected whole or partial genes to manipulate target fungi toward the development of strains overproducing invaluable proteins. We have also used the whole genome sequence information of fungal genomes in public databases and functional genomics approach to select genes to manipulate and eventually contributing greatly to the development of overproducing industrial strains overproducing proteins or secondary metabolites. I will briefly review 1) filamentous fungi as a host for production of recombinant proteins and secondary metabolites, 2) markets of industrial metabolites, 3) a new approach to manipulate up to five genes at the same time in the system that ProxEnrem uses.

• Korean Journal of Organic Agriculture
• /
• v.27 no.3
• /
• pp.271-288
• /
• 2019

It has continuously promoted to scale up the agricultural management body in order to cope with the market-opening pressure such as the UR negotiation, the DDA negotiation, and more conclusions of FTAs and to enhance the competitiveness of our agriculture. This study evaluated the factors associated with production organization participation centered on environmentally-friendly agriculture farmers in order to improve the production efficiency of environmentally-friendly agriculture in the aspect of production. In order to achieve this objective, this study evaluated the factors that contributed to participating in an organization using the bivariate probit model focusing on environmentally-friendly agriculture farmers in Chungnam. This study examined the validity and reliability of the study model through exploratory factor analysis. The results of factor analyses identified four factors: "distribution", "production", "organization operation", and "social capital". The results of the bivariate probit model showed that distribution significantly affected production activities and distribution, organization operation, agricultural income, and gender significantly influenced sale activities. Environmentally-friendly production organization had not been able to provide the productive support that was needed for local farmers to produce environmentally-friendly agricultural products in a region. Additionally, farming education did not provide the information needed by the farmers. Although producers had a network within a production organization, it was operated mainly for administrators. Therefore, participants felt somewhat lacking. This study identified the level of organization of producer organizations in Chungnam area, where environmentally-friendly agriculture is well activated. This study suggested implications for future production organization participation by evaluating factors affecting participation quantitatively.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.8 no.11
• /
• pp.17-25
• /
• 1985

In these days the industrial management are characterized by mass production. Mass production which is not possible without the rationalization in the process of production and the efficient scale of management needs development of technical administration. The object of this study is set up on the rationalization in the process of production. And this rationalization is a means to the aim of industrial management. So as to realize the rationalization in the process of production, we should think on plan of production and the line of balancing in processes of work. The line of balancing is considered as one of very valuable administration methods. The line of balancing that controls capacities and loads so that processes of work might balance in each other makes away with happenings of idleness and stagnation during the process of work As a natural consequence it follows (1) shortening in the period of Production, (2) more efficient, (3) removing the lots of tine and matter, (4) more efficient using in elements for production. Therefore, through the labour productivity and the efficiency of the process of production increased by these effects, the line of balancing was intended to curtail the basic cost. Though the previously said line of balancing could be applied to production, it should not be said that we can completely balance in each lines of work. In other words it is impossible that the line of balancing is completely executed in every lines of work. For that reason, we should arrange the level of balancing in lines. Nowaday, in our country, it is true that the line of balancing is hardly executed at manufacturing industries. Therefore if we execute and apply the line of balancing to manufacturing industries and the larger field as well , we could curtail the basic cost, through which we could reinforce not only the international competative power but increase the labour productivity. As a result, by these effects, we would rationalize the industrial management.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.1143-1152
• /
• 2012

We established a top-down methodology to estimate carbon footprint as national mean value (reference) with the statistical data on agri-livestock incomes in 2007. We also established LCI (life cycle inventory) DB by a bottom-up methodology with the data obtained from interview with farmers from 4 large-scale farms at Gunsan, Jeollabuk-do province to estimate carbon footprint in 2011. This study was carried out to compare top-down methodology and bottom-up methodology in performing LCA (life cycle assessment) to analyze the difference in GHGs (greenhouse gases) emission and carbon footprint under conventional rice cultivation system. Results of LCI analysis showed that most of $CO_2$ was emitted during fertilizer production and rice cultivation, whereas $CH_4$ and $N_2O$ were mostly emitted during rice cultivation. The carbon footprints on conventional rice production system were 2.39E+00 kg $CO_2$-eq. $kg^{-1}$ by top-down methodology, whereas 1.04E+00 kg $CO_2$-eq. $kg^{-1}$ by bottom-up methodology. The amount of agro-materials input during the entire rice cultivation for the two methodologies was similar. The amount of agro-materials input for the bottom-up methodology was sometimes greater than that for top-down methodology. While carbon footprint by the bottom-up methodology was smaller than that by the top-down methodology due to higher yield per cropping season by the bottom-up methodology. Under the conventional rice production system, fertilizer production showed the highest contribution to the environmental impacts on most categories except GWP (global warming potential) category. Rice cultivation was the highest contribution to the environmental impacts on GWP category under the conventional rice production system. The main factors of carbon footprints under the conventional rice production system were $CH_4$ emission from rice paddy field, the amount of fertilizer input and rice yield. Results of this study will be used for establishing baseline data for estimating carbon footprint from 'low carbon certification pilot project' as well as for developing farming methods of reducing $CO_2$ emission from rice paddy fields.

• Membrane Journal
• /
• v.34 no.1
• /
• pp.79-86
• /
• 2024

The flat sheet membrane, one of the representative forms of polymeric membranes, is widely used from material research in laboratories to commercial membrane production due to its ease of fabrication. Porous polymeric flat sheet membranes used in microfiltration and ultrafiltration are mainly fabricated through phase separation processes, utilizing non-solvent-induced and vapor-induced phase separation methods. However, due to the nature of phase separation processes, variations between samples can easily occur depending on the surrounding environment and the experimenter, making it difficult to ensure reproducibility. Therefore, for scaling up and ensuring reproducibility of developed membrane fabrication technologies, there is a need for a controlled environment continuous large-area production device, such as a roll-to-roll manufacturing system. This research compared the changes in membrane characteristics due to differences in manufacturing environments when scaling up laboratory-scale fabrication technologies to roll-to-roll processes using knife and slot die coaters. By optimizing the continuous manufacturing process factors, uniformity of the membrane was ensured during large-area production.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.4
• /
• pp.435-439
• /
• 2000

Records of weight, age, body condition at calving and udder characteristics scores of 425 beef cows and birth weights and periodical weights of their offspring from birth to weaning were analyzed to study the effect of body weight, condition and udder characteristic scores of dams on birth weight and Preweaning growth of their offspring. Dam's body condition (fat reserve) at calving were scored on a scale of 1 to 5 (1=extremely thin and 5=extremely fat) and dam's udder characteristics were scored on a scale of 1 to 7 (l=udder well attached with small teats and 7=at least one quarters not functional). Dams were from three distinct breed groups and were mated in single sire mating groups within each breed group for 45 days. Within each breed group and year, the dams were classified into high, medium and low based on their weights at the time of parturition. The data were analysed using covariance analysis. In general, calves born to heavier dams were heavier at birth and had higher rate of Preweaning growth. The effect of dam's body condition score on the calf birth weight was not significant. However, cows with average body condition score of 2.5 or 3.0 gave birth to calves that had higher pre weaning growth rates up to weaning than those born to calves with higher body condition score. The udder characteristics score did not affect calf birth weight as expected; however, cows with udder score of 3 (udder well attached with large teats) produced calves with higher preweaning growth rate than those with smaller teats. Based on the results, it can be concluded that maintaining animals with average body condition and weight would result in more efficient calf production. In addition, cows with well attached udder and large teats would provide a better maternal environment for Preweaning growth rates of their calves.

• Journal of Environmental Health Sciences
• /
• v.25 no.3
• /
• pp.29-35
• /
• 1999

Quantity and composition of biogas from semi-continuous anaerobic digestion of straw were obtained experimentally in laboratory scale digesters fed with 1 liter of 5% straw-water mixture and maintained at 35$^{\circ}C$. Experiments were carried out for hydraulic retention time(HRT) of 8, 10 and 15days, respectively. The amount and composition of biogas produced were measured until steady-state was achieved for each run. The amount of biogas and methane percent go through a maximum and decrease continuously towards the steady-state after three times operation of hydraulic retention time(HRT). Methane gas production rates at steady-state increase with the increasing of HRT. Biogas production of 0.45 liter/day with 25% methane, 0.42 liter/day with 33.7% methane and 0.492 liter/day with 31.7% methane were obtained for 8, 10 and 15days of HRT, respectively. The high proportion of soluble carbohydrates present in straw makes the volatile fatty acids to build up within the digester causing a drop in pH that inhibits digestion. Regular control of pH is therefore necessary by adding alkalinity. Reductions in COD increase with increase in HRT. The stratification of plant material within the digester is different from that of manure, and modifications in design and operation of digesters may be necessary if they are fed with plant matter.