• Journal of Chest Surgery
• /
• v.36 no.12
• /
• pp.961-969
• /
• 2003

The purpose of this study was to evaluate the fate of left atrioventricular valve regurgitation(LAVVR) following repair of complete atrioventricular septal defects (AVSDs). Material and Method: Between July 1984 and March 2002, repair of complete AV defects were performed in 77 patients. Mean age at surgery was 30.23$\pm$69.11 months (range 1 to 456). Echocardiograms of all survivors after isolated AVSDs correction were reviewed. LAVVR were evaluated with color doppler echocardiography in 64 survival periodically. On each study, LAVVR severity was graded on a 1 to 4 scale, based upon the size of the regurgitated jet. Result: Mild deterioration of LAVV function was fairly common. LAVVR severity increased by >1 grade in 19 patients (30.2%) during the course of the study. However, the deterioration in LAVVR function occurred primarily between 12 and 24 months postoperatively. After the initial 24 postoperative months, LAVVR worsened on only 8 occasions and in each instance worsened by only 1 grade. Deterioration more than 3+ LAVVR occurred in only 3 patients. And deterioration to 4+ LAVVR was not observed after the initial 24 postoperative months but one. Survival curve analysis predicted a 88.2% of ten-year freedom rate from development of 4+ LAVVR after initial operation of complete AVSDs. Conclusion: Postoperative LAVVR remains fairly stable following AVSDs repair, Serious deterioration is rare after 24 postoperative months, especially after the initial 48 postoperative months. But serial follow-up study with echocariogram was need till 24 postoperative months after repair of complete AVSDs.

• Journal of the Korean Vacuum Society
• /
• v.15 no.1
• /
• pp.97-102
• /
• 2006

Anodic alumina with self-organized and ordered nano hole arrays can be a good candidate of an irradiation mask to modify the properties of nano-scale region. In order to try using porous anodic alumina as a mask for ion-beam patterning, ion beam transmittance of anodic alumina was tested. 4 Um thick self-standing AAO templates anodized from Al bulk foil with two different aspect ratio, 200:1 and 100:1, were aligned about incident ion beam with finely controllable goniometer. At the best alignment, the transmittance of the AAO with aspect ratio of 200:1 and 100:1 were $10^{-8}\;and\;10^{-4}$, respectively. However transmittance of the thin film AAO with low aspect ratio, 5:1, were remarkably improved to 0.67. The ion beam transmittance of self-standing porous alumina with a thickness larger than $4{\mu}m$ is extremely low owing to high aspect ratio of nano hole and charging effect, even at a precise beam alignment to the direction of nano hole. $SiO_2$ nano dot array was formed by ion irradiation into thin film AAO on $SiO_2$ film. This was confirmed by scanning electron microscopy that the $SiO_2$ nano dot array is similar to AAO hole array.

• International Commerce and Information Review
• /
• v.13 no.3
• /
• pp.169-201
• /
• 2011

There was a new wave in grocery business with development of information and technology, thus a movement from traditional stores to online stores, In order to expand the scale of traditional supermarket and to satisfy the customers' needs, they provide offline and online services simultaneously. This paper is based on the previous studies which had been researched in developed countries from late 1990s to early 2000s and the purpose of this study is to introduce the idea and operation system of e-Grocery business. Moreover, we suggest the alternatives on delivery service methods in order to satisfy the customers' needs through analyzing the current condition of e-Grocers in Korea. According to the result of this study, Korean e-Grocers offer only attended home delivery services. In our opinion, Korean supermarkets have to take hybrid model which Tesco.com is using. There are some alternatives to increase the profits of Korean e-Grocers and to provide better services to their customers as follows: As an alternatives for delivery services, picking service is the easiest and cheapest way to apply for supermarkets. This is very useful for working women and also it is possible to order by smartphone recently. They can order the goods to the closest local supermarkets from working place, and then they pick them up on the way home from working off. In order to improve the quality of delivery services, to use the reception box will be the way to provide better services to the customers. The reception box is a way to protect the quality of goods such as fresh-cut product, which require the freshness through the temperature adjustment, and also to keep the safety of ordered goods through locking system Through this system, supermarkets are able to use attended or unattended services under the customers' satisfaction. However, using the reception box is expensive, so shared reception box will be an alternative. As an alternative for development of e-Grocery business, the advertisement for e-Grocery business has to be supported in order to attract potential customers in e-Grocery business. Furthermore, the main concerns of e-Grocery business such as the sanitation and safety of goods, and convenience must be guaranteed in order to keep the loyal customers and to attract new customers.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.115-122
• /
• 2002

There is various points that should be improved in Fairness such as our contract practice to propose construction projects, project managing and the stakeholders' way of thinking and culture. We consider that the revision of construction related provisions and systems is required but even more, an overall change in business management through the implementation of Integrated Construction Information Management System that will enable the owner, which drives the project, and contractor sharing construction information is required. To mange construction related information in an integrated manner, designing information should be smoothly transferred to purchasing information, and changes are required in order to move ahead to process-oriented work system. Finally information created from various construction organizations should be delivered in an aligned and standardized manner as well. The domestic Nuclear Power Plant Construction has been accepting various technology transfers from U.S, France, Canada and UK, which enabled us to self-support technology and recently even proceeded to the phase exporting our technology to others. However, continuous effort is required to improve internal business efficiency and to respond to external environmental change such aselectricity market deregulation. Recently, in accordance with the result in number of CEO's intention to make progress in IT and improve business efficiency, the number of enterprises introducing Enterprise Resource Planning is increasing. ERP is an innovative tool which changes the way of performing work from organization and department orientation to process-orientation in order to optimize the resources, such as human and material resources, through out the Enterprise by performing BPR which will maximize overall business efficiency of the enterprise, such includes not only construction management, but also business management. KHNP continued to performing large scaled construction projects such as nuclear power plant construction for past 30 years and took the initiatives of large scale project management and Quality management ability in domestic industry by having independent capability of over all construction planning, purchasing and, construction and start up management etc. To maintain our leading position of improving construction management technology based on our accumulated project management experience and technology, KHNP included construction into our ERP project in purpose of innovating construction business. We would like to discuss the characteristics of nuclear construction business, project management system, information system infrastructure and information sharing system among construction related entities, and implementation practices for information system, and consider how to resolve our practice that should be improved in this thesis.

• The Korean Journal of Ecology
• /
• v.28 no.5
• /
• pp.305-320
• /
• 2005

Recently 64 species in Korea have been ranked as rare and endangered taxa by the Ministry of Environment using two categories, I and II. The original threat categories produced by the Ministry of Environment were developed to provide a standard for specifying animals and plants in danger of extinction and has been influential sources of information used in species conservation in Korea. However, the criteria by Ministry of Environment were applied to the whole taxa only by regional boundaries, especially in South Korea, rather than international context, and it also lacked an explicit framework that was necessary to ensure repeatability among taxa because of the absence of quantitative criteria to measure the likelihood of extinction. The World Conservation Union (IUCN) has developed quantitative criteria for assessing the conservation status of species. The threatened species categories, the 2000 IUCN Red List, proposed by SSC (Species Survival Commission) of IUCN have become widely recognized internationally. Details of threatened Korean plants, identified by applying the IUCN threat categories and definitions, were listed and analyzed. The number of species identified as threatened was only 34 out of 64 taxa (48.4%), while the rest of taxa were rejected from the original lists. Many of the species (51.6%, 33 taxa) excluded from the original list proposed by Ministry of Environment do not qualify as Critically Endangered, Endangered or Vulnerable because these taxa were widely distributed either in Japan or in China/far eastern Russia and there is no evidence of substantial decline in these countries. An evaluation of taxa in Korea has been carried out only based on subjective views and qualitative data, rather than quantitative scientific data, such as rates of decline, distribution range size, population size, and risk of extinction. Therefore, the national lists undermine the credibility of threatened species lists and invite misuse, which have been raised by other cases, qualitative estimate of risk, political influence, uneven taxonomic or geographical coverage. The increasing emphasis on international responsibilities means that global scale is becoming more significant. The current listings by Environment of Ministry of Korea should be challenged, and the government should seek to facilitate the resolution of disagreements. Especially the list should be flexible enough to handle uncertainty and also incorporates detailed, quantitative data. It is suggested that the highest priorities for the Red List should be given to endemic species in Korea first. After setting up the list of endemic species to Korea, quantitative data on population size and structure, distributional range, rated of decline, and habitat fragmentation should be collected as one of long term projects for the Red list categories. Transparency and accountability are the most important key factors. Also, species assessors are named and data sources referenced are required for the future objective evaluations on Korean plant taxa.

• International Journal of Ocean System Engineering
• /
• v.2 no.3
• /
• pp.185-194
• /
• 2012

A Macroscopic combination of two or more distinct materials is commonly referred to as a "Composite Material", having been designed mechanically and chemically superior in function and characteristic than its individual constituent materials. Composite materials are used not only for aerospace and military, but also heavily used in boat/ship building and general composite industries which we are seeing increasingly more. Regardless of the various applications for composite materials, the industry is still limited and requires better fabrication technology and methodology in order to expand and grow. An example of this is that the majority of fabrication facilities nearby still use an antiquated wet lay-up process where fabrication still requires manual hand labor in a 3D environment impeding productivity of composite product design advancement. As an expert in the advanced composites field, I have developed fabrication skills with the use of machinery based on my past composite experience. In autumn 2011, the Korea government confirmed to fund my project. It is the development of a composite sanding machine. I began development of this semi-robotic prototype beginning in 2009. It has possibilities of replacing or augmenting the exhaustive and difficult jobs performed by human hands, such as sanding, grinding, blasting, and polishing in most often, very awkward conditions, and is also will boost productivity, improve surface quality, cut abrasive costs, eliminate vibration injuries, and protect workers from exposure to dust and airborne contamination. Ease of control and operation of the equipment in or outside of the sanding room is a key benefit to end-users. It will prove to be much more economical than normal robotics and minimize errors that commonly occur in factories. The key components and their technologies are a 360 degree rotational shoulder and a wrist that is controlled under PLC controller and joystick manual mode. Development on both of the key modules is complete and are now operational. The Korean government fund boosted my development and I expect to complete full scale development no later than 3rd quarter 2012. Even with the advantages of composite materials, there is still the need to repair or to maintain composite products with a higher level of technology. I have learned many composite repair skills on composite airframe since many composite fabrication skills including repair, requires training for non aerospace applications. The wind energy market is now requiring much larger blades in order to generate more electrical energy for wind farms. One single blade is commonly 50 meters or longer now. When a wind blade becomes damaged from external forces, on-site repair is required on the columns even under strong wind and freezing temperature conditions. In order to correctly obtain polymerization, the repair must be performed on the damaged area within a very limited time. The use of pre-impregnated glass fabric and heating silicone pad and a hot bonder acting precise heating control are surely required.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.267-274
• /
• 2017

This study discusses the applicability of environmental friendly EVA based butyl rubber self-adhesive waterproof sheet designed to prevent corrosion of large scale pipes used in the water treatment facilities during th water treatment process. The experiments conducted tested the waterproofing sheet's adhesion strength on the steel surface of the pipes and checked for whether the material has the proper response properties against the various environmental conditions. In addition, it the sheet adhered to the steel pipe was to see if the adhesion hold against the water pressure due to the ingress of inflow water. Finally, the waterproofing sheet's adhesion strength was tested on a rusted steel surface to confirm whether the material has the necessary properties to secure stable adhesion strength and prevent corrosion of steel pipes at the same time during the process of installation or maintenance. As a result, the self-adhesive waterproof sheets showed that all attachments in the untreated, long term pressuring, immersion in chemical substance (hydrochloric acid, hypochlorous acid, sodium hydroxide), low temperature ($-20^{\circ}C$) conditions showed a adhesion performance of higher than 1.5N/mm, which is the performance standard of KS F 4934. Also, in the testing to check for the adhesion property against inverse water pressure, it was observed that the adhesion failure did not occur even up to $3.0N/mm^2$ pressure. Also, in the process of assessing the adhesion performance on rusted steel surface, specimens after 12 hours of corrosion treatment was shown to have 2.1N/mm, and specimens after 168 hours of corrosion treatment was shown to have 2.0N/mm adhesion strength performance.

• Journal of Intelligence and Information Systems
• /
• v.20 no.4
• /
• pp.107-120
• /
• 2014

This study proposes a novel recommender system using the structural hole analysis to reflect qualitative and emotional information in recommendation process. Although collaborative filtering (CF) is known as the most popular recommendation algorithm, it has some limitations including scalability and sparsity problems. The scalability problem arises when the volume of users and items become quite large. It means that CF cannot scale up due to large computation time for finding neighbors from the user-item matrix as the number of users and items increases in real-world e-commerce sites. Sparsity is a common problem of most recommender systems due to the fact that users generally evaluate only a small portion of the whole items. In addition, the cold-start problem is the special case of the sparsity problem when users or items newly added to the system with no ratings at all. When the user's preference evaluation data is sparse, two users or items are unlikely to have common ratings, and finally, CF will predict ratings using a very limited number of similar users. Moreover, it may produces biased recommendations because similarity weights may be estimated using only a small portion of rating data. In this study, we suggest a novel limitation of the conventional CF. The limitation is that CF does not consider qualitative and emotional information about users in the recommendation process because it only utilizes user's preference scores of the user-item matrix. To address this novel limitation, this study proposes cluster-indexing CF model with the structural hole analysis for recommendations. In general, the structural hole means a location which connects two separate actors without any redundant connections in the network. The actor who occupies the structural hole can easily access to non-redundant, various and fresh information. Therefore, the actor who occupies the structural hole may be a important person in the focal network and he or she may be the representative person in the focal subgroup in the network. Thus, his or her characteristics may represent the general characteristics of the users in the focal subgroup. In this sense, we can distinguish friends and strangers of the focal user utilizing the structural hole analysis. This study uses the structural hole analysis to select structural holes in subgroups as an initial seeds for a cluster analysis. First, we gather data about users' preference ratings for items and their social network information. For gathering research data, we develop a data collection system. Then, we perform structural hole analysis and find structural holes of social network. Next, we use these structural holes as cluster centroids for the clustering algorithm. Finally, this study makes recommendations using CF within user's cluster, and compare the recommendation performances of comparative models. For implementing experiments of the proposed model, we composite the experimental results from two experiments. The first experiment is the structural hole analysis. For the first one, this study employs a software package for the analysis of social network data - UCINET version 6. The second one is for performing modified clustering, and CF using the result of the cluster analysis. We develop an experimental system using VBA (Visual Basic for Application) of Microsoft Excel 2007 for the second one. This study designs to analyzing clustering based on a novel similarity measure - Pearson correlation between user preference rating vectors for the modified clustering experiment. In addition, this study uses 'all-but-one' approach for the CF experiment. In order to validate the effectiveness of our proposed model, we apply three comparative types of CF models to the same dataset. The experimental results show that the proposed model outperforms the other comparative models. In especial, the proposed model significantly performs better than two comparative modes with the cluster analysis from the statistical significance test. However, the difference between the proposed model and the naive model does not have statistical significance.

• Clinical and Experimental Pediatrics
• /
• v.51 no.7
• /
• pp.671-689
• /
• 2008

The economic recession of North Korea has been prolonged, the need for humanitarian assistance for the women and children of DPRK has been raised. In March 2006, South Korean government signed MOU with World Health Organization (WHO) to financially support "Improving Women's and Children's Health in DPRK (IWCH)" project. The assistance projects through UNICEF and the non-government organizations of South Korea were also followed. IWCH project consists of three parts; nutrition, disease management, children and maternity care. The first term (2006-2007) of the project leading by WHO was finished, and the second term (2008-2010) is just begun. The projects driven by NGOs have relatively been delayed due to difficulties in negotiating on project contents and places with North Korea. Recently, however, re-modeling processes of an obstetric/gynecology hospital and a children hospital in Nampo were started. Up to recently, South Korean government has played only a limited role in the humanitarian assistance for North Korea. IWCH project is, however, a full-scale initiative driven by government based on a systematic review of need and priorities. A significant amount of budget and relatively long term (five year) project compare to the previous short term and small size programs were expected to make more meaningful achievement. Despite these positive aspects, the project remains a list of unsolved problems a lack of mutual trust, a different decision making process between South and North Korea, a lack of conflict management process, and unpredictability and complexity of international politics. In spite of such kind of political uncertainty, the health care sector will be a leading area in the process of improving relationship between South and North Korea, particularly, humanitarian assistance for women and children will play a crucial role in the process. The successful implementation of IWCH project, therefore, will contribute to provide the reference model in developing the mutually constructive relationship between South and North

• Korean Journal of Biological Psychiatry
• /
• v.14 no.4
• /
• pp.232-240
• /
• 2007

Objectives : Vascular endothelial growth factor(VEGF), one of potent cytokines, and its receptors were related with various biological functions and pathological conditions. The purpose of this study was to investigate the changes of serum level of free VEGF, soluble VEGFR-1, and soluble VEGFR-2 after treatment with atypical antipsychotic drug in schizophrenia. Method : The schizophrenic patients were diagnosed with DSM-IV and were prospectively followed up for 4 and 8 weeks. Thirteen schizophrenic patients were evaluated their clinical assessment with serum levels of free VEGF, sVEGFR-1, sVEGFR-2, and positive and negative symptom scale(PANSS) at baseline, 4 weeks, and 8 weeks after treatment with atypical antipsychotic drug. Thirteen normal control subjects were recruited and matched with the patient group by age and sex. Result : The serum level of free VEGF($295.2{\pm}43.7$pg/ml)and sVEGFR-2($8259{\pm}336.7$) at baseline(before treatment) in schizophrenic patients were not significantly different, compared with the control group($199.0{\pm}28.8$ and $8481{\pm}371.9$) respectively. However, the serum level of sVEGFR-1($86.2{\pm}10.3$, p<0.05) was significantly increased in the schizophrenic patients compared with the control group($59.0{\pm}6.4$). After treatment with antipsychotic drug, the serum levels of free VEGF at 4 weeks($338.9{\pm}56.5$) and 8 weeks($309.5{\pm}58.7$) were not significantly, different compared with baseline. But the serum levels of sVEGFR-1 was significantly decreased at 8 weeks ($57.3{\pm}6.3$, p<0.05) after antipsychotic drug treatment. The serum levels of sVEGFR-2 were decreased at 4 weeks ($7761{\pm}403.0$, p<0.05) and 8 weeks($7435{\pm}333.5$, p<0.05) compared with baseline. Conclusion : The decreased serum level of sVEGFR-1 and sVEGFR-2 might be affected by dopaminergic system which was influenced by antipsychotic drug.