• 한국컴퓨터정보학회논문지
• /
• 제13권6호
• /
• pp.203-210
• /
• 2008

최근 무선 통신의 대중화로 인터넷 사용자들은 모바일 컴퓨팅 환경에서도 HTTP 기반의 웹 서비스를 요구하고 있다. 그러나 모바일 디바이스의 제한적인 자원의 특성으로 인해 전체 웹 서비스 성능이 저하될 수 있다. 그러므로 무선 인터넷 전송 시스템을 설계하는 데 가장 중요한 요소로 급속도로 증가하는 수요에 따라 대용량 트래픽을 처리할 수 있는 확장성을 고려해야 한다. 그러나, 현재까지 몇몇 선행 연구의 경우에도 단순한 압축, 캐싱 등을 이용하여 문제를 해결하고자 했을 뿐 근본적인 성능 개선책을 제시하지 못하고 있다. 따라서 본 논문에서는 모바일 환경에서 웹 서비스를 수행할 때 발생하는 여러 문제점들과 사용자의 요구 사항을 해결하기 위해 HTML/WML 변환기, SOAP 메시지 처리기 등으로 구성된 모바일 환경을 위한 웹 서비스 전송 시스템을 제안한다. 제안된 시스템을 평가하기 위해 기존의 시스템과 비교하여 분석한다.

• 설비공학논문집
• /
• 제19권12호
• /
• pp.821-830
• /
• 2007

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damage, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle-installed downstream of the high pressure turbine extraction steam line- inside number 5A and 5B feedwater heaters. At that point, the extracted steam from the high pressure turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows in reverse direction after impinging the impingement baffle, the shell wall of the number 5 high pressure feedwater heater may be affected by flow-accelerated corrosion. This paper describes the comparisons between the numerical results using the FLUENT code and the down scale experimental data on effect of geometry of the impingement baffle plate on the shell wall thinning. Additionally, a new type impingement baffle plate was installed above the impingement baffle plate in the feedwater heater and then the numerical and experimental study were performed in the same progress.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.396-396
• /
• 2013

The resistive random access memory (ReRAM) has several advantages to apply next generation non-volatile memory device, because of fast switching time, long retentions, and large memory windows. The high mobility of monolayered graphene showed several possibilities for scale down and electrical property enhancement of memory device. In this study, the monolayered graphene grown by chemical vapor deposition was transferred to $SiO_2$ (100 nm)/Si substrate and glass by using PMMA coating method. For formation of metal-oxide nanoparticles, we used a chemical reaction between metal films and polyamic acid layer. The 50-nm thick BPDA-PDA polyamic acid layer was coated on the graphene layer. Through soft baking at $125^{\circ}C$ or 30 min, solvent in polyimide layer was removed. Then, 5-nm-thick indium layer was deposited by using thermal evaporator at room temperature. And then, the second polyimide layer was coated on the indium thin film. After remove solvent and open bottom graphene layer, the samples were annealed at $400^{\circ}C$ or 1 hr by using furnace in $N_2$ ambient. The average diameter and density of nanoparticle were depending on annealing temperature and times. During annealing process, the metal and oxygen ions combined to create $In_2O_3$ nanoparticle in the polyimide layer. The electrical properties of $In_2O_3$ nanoparticle ReRAM such as current-voltage curve, operation speed and retention discussed for applictions of transparent and flexible hybrid ReRAM device.

• 한국농공학회논문집
• /
• 제57권1호
• /
• pp.99-109
• /
• 2015

In the construction industry, the interest for recycling aggregates is rising as more people demand for alternatives due to lack of supply of natural aggregates and environmental problems. However, in order for recycled aggregates to be used in infrastructures, stability and other factors need to be verified. Therefore, the objective of this study is to analyze the sensitivity of soil properties to secure slope safety according to various heights of embankment when bottom ash and dredged soil mixture is applied in the embankment. In most cases, all heights were safe for the slide for the embankment whether the water level is full or sudden draw down. The result of the sensitivity analysis revealed that the unit weight of embankments is highest among all factors to be considered. However, the sensitivity of the unit weight became smaller and the sensitivity of the friction angle of embankments increased with the height of embankments. The sensitivity of factors of core materials is very small because the core has weaker physical properties than those of the embankment. The effect of the height for each factor is different for each slope and water levels. The sensitivity of the unit weight of embankments is most affected when the height is 60m in the upstream slope. To conclude, bottom ash and dredged soil mixture can be applied in the embankment and different factors must be considered in different scale because the sensitivity depends highly on the height of embankments.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권6호
• /
• pp.1-10
• /
• 2014

본 연구에서는 표준실험체 (BSS), 순환굵은골재와 고로슬래그 미분말의 치환과 하이브리드섬유를 보강한 실험체 ($BSPRR_1$, $BSPRR_2$시리즈), 순환굵은골재와 고로슬래그 미분말의 치환과 PVA섬유를 보강한 실험체 (BSPG시리즈)로 총 13개의 실험체를 실물크기의 1/2로 축소 제작하여 실험을 수행하였다. 실험을 통하여 얻어진 결과를 비교 분석하여 하중-변위, 파괴형태, 최대내력 등을 규명함으로써 구조성능의 개선정도를 평가하였다. 실험결과 순환굵은골재와 고로슬래그 미분말을 치환한 콘크리트에 하이브리드섬유를 보강한 실험체 ($BSPRR_1$, $BSPRR_2$시리즈)의 경우 표준실험체 (BSS)에 비하여 압축강도는 최대 13%, 최대내력은 4~21%, 연성능력은 각각 4~28% 증가하는 결과를 나타내었다. 그리고 또한, 충분한 연성적인 거동과 안정적인 휨인장 파괴를 나타내었다.

• 수산경영론집
• /
• 제33권2호
• /
• pp.1-29
• /
• 2002

The main objective of this research aims at analyzing efficiency of government financial transfers(GFTs) to the Korean fisheries sector, using the Linear Structural Relations model(i.e., LISERL model) and the field survey data. Most policies of GFTs tend to be implemented to protect industries with weak competitive advantages such as infant and/or primary industries. Specific policy instruments include income transfers, government loans with lower interest rates, taxes and the like. Fishing activities are made at a highly changeable natural environment of the ocean with a great amount of risk and uncertainty. Fishing households make their livelihood under the small-scale fisheries. Such fisheries and fishing households have also a relatively weak market power. Because of these fisheries characteristics most coastal states have adopted a variety of government support programs. However, despite such a huge government support, during the past several decades the world fishing communities have seen a tendency of continuous fishereis resource overexploitation. For this resason there have been hot debates over the government support policies for fisheries through OECD, FAO, WTO, and UNEP. In general, policy evaluations tend to be made on the basis of benefit-cost(B/C) analysis. However, the B/C analysis may produce results quite different from real ones primarily due to many unmeasurable effects. Thus, the authors composed simple questionaires and let fishermen, government officials and academic people answer the questions. The survery was made in several ways such as post-mail and personal/group interviews. In recent years, for analysis of policy performances and effectiveness, the LISREL model has often been used, which consists of structural and measurement eqquations. This model has a good advantage of transforming unobservable variables to observable ones so that it helps construct endogenous cause and effect relationships among relevant variables. The evaluation was done from the two aspects: policy results and policy effectiveness. The policy result evaluation showed that there is a need for improvement for policy problem perception and decision-making process, while the policy effect evaluation suggested that the policy goals were successfully achieved and social justice was improved from the perspective of the entire society as well. However, the research results showed that the GFT policies rendered little contrubtion to narrowing down the gap between GFT beneficiaries and non-beneficiaries incomes.

• 한국지진공학회논문집
• /
• 제7권2호
• /
• pp.49-58
• /
• 2003

본 연구에서는 구조가 간단하고 경제적이며, 보수유지 면에서 능동형 진동제어 장치로서 매우 유리한 장점을 가지고 있는 선형모터 댐퍼(LMD : linear motor damper)를 개발하여 유니슨 기술연구소에 설치된 대형 철골구조물에 적용하였다. 개발된 LMD는 1,500kg의 가동질량을 갖고 있으며, 최대 $\pm$250mm의 변위로 움직일 수 있다. 제어 대상 시험구조물의 최저차 2개 진동형만을 가지는 축소모델을 사용하여 H$_{\infty}$ 제어로직을 설계하였다. 일련의 성능 검증시험을 통해 시험 구조물의 1, 2차 진동형에 대해 가속도 레벨이 약 l0dB 감소함을 확인하였다. 본 연구를 통해 개발된 LMD가 풍 및 지진하중을 받는 구조물의 진동제어용 제진장치로서 가능성이 있음을 확인하였다.

• 대한간호학회지
• /
• 제7권1호
• /
• pp.10-19
• /
• 1977

Trust is an essential factor in human relations, as it enables man to accept and also disclose self. Today's health care demands nursing personnel with high level of trust . This study was designed and carried out in May through June, 1976 to measure the level of trust on nurses through the trust scale of Nurses (75- N) made by Kenneth et al. and the Parent Inventory made by Rake and to provide data for management of nursing personnel. 150 junior nursing students, 164 professional nurses from 5 universities and their medical centers and 55 nurse- educators from 8 baccalaureate nursing programs in Seoul were randomly sampled. Results are as follows : 1. The rank order of the level of trust revealed that nurse educators the highest and nursing students the lowest. 2. The level of trust revealed to be influenced by the relationship with parents at the early stages of life ; Group who appeared to have shared intimacy with their parents were the highest. 3. Factors such as ; number of siblings and birth order among them, religious affiliation, parental presence revealed to have had no influence on the level of trust in all three group. 4. No significant difference were revealed between the group who had put their names down on the questionnaire and the others. 5. Clinical specialities of practice revealed to have no signigicant influence on trust in nurses. 6. Marital status revealed to have significant influence : in nurses and nurse- educators, the mastered re vented to have significantly higher level of trust. (difference by Recommendations : 1. A study on trust level of patients and Nurses in Nurse- patient Relationship. 2. A longitudinal study to investigate the influence of Nursing education on the development of trust in Nurses are recommended. 3. A comparative study on trust level of students of Nursing & non- Nursing major.

• 천문학회보
• /
• 제41권1호
• /
• pp.38.2-38.2
• /
• 2016

The mapping of dark matter clustering from real to redshift spaces introduces the anisotropic property to the measured density power spectrum in redshift space, known as the Redshift Space Distortion (hereafter RSD) effect. The mapping formula is intrinsically non-linear, which is complicated by the higher order polynomials due to the indefinite cross correlations between the density and velocity fields, and the Finger-of-God (hereafter FoG) effect due to the randomness of the peculiar velocity field. Furthermore, the rigorous test of this mapping formula is contaminated by the unknown non-linearity of the density and velocity fields, including their auto- and cross-correlations, for calculating which our theoretical calculation breaks down beyond some scales. Whilst the full higher order polynomials remains unknown, the other systematics can be controlled consistently within the same order truncation in the expansion of the mapping formula, as shown in this paper. The systematic due to the unknown non-linear density and velocity fields is removed by separately measuring all terms in the expansion using simulations. The uncertainty caused by the velocity randomness is controlled by splitting the FoG term into two pieces, 1) the non-local FoG term being independent of the separation vector between two different points, and 2) the local FoG term appearing as an indefinite polynomials which is expanded in the same order as all other perturbative polynomials. Using 100 realizations of simulations, we find that the best fitted non-local FoG function is Gaussian, with only one scale-independent free parameter, and that our new mapping formulation accurately reproduces the observed power spectrum in redshift space at the smallest scales by far, up to k ~ 0.3 h/Mpc, considering the resolution of future experiments.

• 한국식품영양과학회지
• /
• 제21권1호
• /
• pp.64-69
• /
• 1992

Blanching 처리가 고추의 건조율 및 색도에 미치는 효과를 조사하고자 실험실 규모의 열풍 건조기를 제작하였으며 strain gage형의 load cell과 strain amplifier를 이용하여 건조 중의 중량을 연속적으로 기록, 측정하였다. 고추의 건조특성곡선은 대조군에서는 예비, 항율, 감율건조기간이 뚜렷한 반면, blanching 처리군은 감율건조기간만 존재하였으며, 시료의 건조율과 건조상수 값은 blanching 처리 온도와 시간에 비례하여 증가하는 경향이었고, $100^{\circ}C$, 3분 blanching 처리군이 가장 높게 나타났다. Capsanthin 함량 역시 대조군에 비해 처리군이blanching 처리온도와 시간에 비례하였으며 색도 값의 경우 $80^{\circ}C$, 3분 blanching군이 가장 우수하였다. blanching 처리는 전반적으로 고추의 건조율 증진 및 색도 보존에 효과적이며 $80^{\circ}C$, 3분 blanching 처리가 비교적 적합하였다.