• Journal of the Korea Society of Computer and Information
• /
• v.13 no.6
• /
• pp.203-210
• /
• 2008

Recently, as wireless communication are becoming more and more popular, Internet users is becoming increasingly demand HTTP-based web service in mobile computing environment. But, overall performance of web services may slow down, because mobile device are generally equipped with lower capability. Therefore, the most important factor to design wireless internet delivery system should be scalable to handle a large scale traffic due to rapidly growing users. But, in case of some preceding research, they not present a basic efficiency reform measure until currently. Therefore, In this paper, We propose a Web Service Delivery System for mobile environment that alleviates problems that occurred while executing web services in mobile environment and are helpful to overcome the above needs. The system composed of HTML/WML Converter, SOAP message processor. We compare the existing system with the proposed system.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.12
• /
• pp.821-830
• /
• 2007

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damage, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle-installed downstream of the high pressure turbine extraction steam line- inside number 5A and 5B feedwater heaters. At that point, the extracted steam from the high pressure turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows in reverse direction after impinging the impingement baffle, the shell wall of the number 5 high pressure feedwater heater may be affected by flow-accelerated corrosion. This paper describes the comparisons between the numerical results using the FLUENT code and the down scale experimental data on effect of geometry of the impingement baffle plate on the shell wall thinning. Additionally, a new type impingement baffle plate was installed above the impingement baffle plate in the feedwater heater and then the numerical and experimental study were performed in the same progress.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.396-396
• /
• 2013

The resistive random access memory (ReRAM) has several advantages to apply next generation non-volatile memory device, because of fast switching time, long retentions, and large memory windows. The high mobility of monolayered graphene showed several possibilities for scale down and electrical property enhancement of memory device. In this study, the monolayered graphene grown by chemical vapor deposition was transferred to $SiO_2$ (100 nm)/Si substrate and glass by using PMMA coating method. For formation of metal-oxide nanoparticles, we used a chemical reaction between metal films and polyamic acid layer. The 50-nm thick BPDA-PDA polyamic acid layer was coated on the graphene layer. Through soft baking at $125^{\circ}C$ or 30 min, solvent in polyimide layer was removed. Then, 5-nm-thick indium layer was deposited by using thermal evaporator at room temperature. And then, the second polyimide layer was coated on the indium thin film. After remove solvent and open bottom graphene layer, the samples were annealed at $400^{\circ}C$ or 1 hr by using furnace in $N_2$ ambient. The average diameter and density of nanoparticle were depending on annealing temperature and times. During annealing process, the metal and oxygen ions combined to create $In_2O_3$ nanoparticle in the polyimide layer. The electrical properties of $In_2O_3$ nanoparticle ReRAM such as current-voltage curve, operation speed and retention discussed for applictions of transparent and flexible hybrid ReRAM device.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.1
• /
• pp.99-109
• /
• 2015

In the construction industry, the interest for recycling aggregates is rising as more people demand for alternatives due to lack of supply of natural aggregates and environmental problems. However, in order for recycled aggregates to be used in infrastructures, stability and other factors need to be verified. Therefore, the objective of this study is to analyze the sensitivity of soil properties to secure slope safety according to various heights of embankment when bottom ash and dredged soil mixture is applied in the embankment. In most cases, all heights were safe for the slide for the embankment whether the water level is full or sudden draw down. The result of the sensitivity analysis revealed that the unit weight of embankments is highest among all factors to be considered. However, the sensitivity of the unit weight became smaller and the sensitivity of the friction angle of embankments increased with the height of embankments. The sensitivity of factors of core materials is very small because the core has weaker physical properties than those of the embankment. The effect of the height for each factor is different for each slope and water levels. The sensitivity of the unit weight of embankments is most affected when the height is 60m in the upstream slope. To conclude, bottom ash and dredged soil mixture can be applied in the embankment and different factors must be considered in different scale because the sensitivity depends highly on the height of embankments.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.6
• /
• pp.1-10
• /
• 2014

In this study, thirteen reinforced concrete beams, ground granulated blast furnace slag, replacing recycled coarse aggregate with PVA fiber (BSPG series) and recycled coarse aggregate with hybrid fiber ($BSPGR_1$, $BSPGR_2$ series), and standard specimen (BSS) were constructed and tested under monotonic loading. Experimental programs were carried out to improve and evaluate the Structural performance of such test specimens, such as the load-displacement, the failure mode, and the maximum load carrying capacity. All the specimens were modeled in 1/2 scale-down size. Test results showed that test specimens ($BSPGR_1$, $BSPGR_2$ series) was increased the compressive strength by 13%, the maximum load carrying capacity by 4~21% and the ductility capacity by 4~28% in comparison with the standard specimen (BSS). And the specimens ($BSPGR_1$, $BSPGR_2$ series) showed enough ductile behavior and stable flexural failure.

• The Journal of Fisheries Business Administration
• /
• v.33 no.2
• /
• pp.1-29
• /
• 2002

The main objective of this research aims at analyzing efficiency of government financial transfers(GFTs) to the Korean fisheries sector, using the Linear Structural Relations model(i.e., LISERL model) and the field survey data. Most policies of GFTs tend to be implemented to protect industries with weak competitive advantages such as infant and/or primary industries. Specific policy instruments include income transfers, government loans with lower interest rates, taxes and the like. Fishing activities are made at a highly changeable natural environment of the ocean with a great amount of risk and uncertainty. Fishing households make their livelihood under the small-scale fisheries. Such fisheries and fishing households have also a relatively weak market power. Because of these fisheries characteristics most coastal states have adopted a variety of government support programs. However, despite such a huge government support, during the past several decades the world fishing communities have seen a tendency of continuous fishereis resource overexploitation. For this resason there have been hot debates over the government support policies for fisheries through OECD, FAO, WTO, and UNEP. In general, policy evaluations tend to be made on the basis of benefit-cost(B/C) analysis. However, the B/C analysis may produce results quite different from real ones primarily due to many unmeasurable effects. Thus, the authors composed simple questionaires and let fishermen, government officials and academic people answer the questions. The survery was made in several ways such as post-mail and personal/group interviews. In recent years, for analysis of policy performances and effectiveness, the LISREL model has often been used, which consists of structural and measurement eqquations. This model has a good advantage of transforming unobservable variables to observable ones so that it helps construct endogenous cause and effect relationships among relevant variables. The evaluation was done from the two aspects: policy results and policy effectiveness. The policy result evaluation showed that there is a need for improvement for policy problem perception and decision-making process, while the policy effect evaluation suggested that the policy goals were successfully achieved and social justice was improved from the perspective of the entire society as well. However, the research results showed that the GFT policies rendered little contrubtion to narrowing down the gap between GFT beneficiaries and non-beneficiaries incomes.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.2
• /
• pp.49-58
• /
• 2003

The linear motor has not only no backlash and less friction, resulting in very high accuracy, but also mechanical simplicity, higher reliability, and longer lifetime. In this study, a large-capacity hybrid mass damper using linear motor principle has been developed to suppress vibration of large structures. It is designated linear motor damper in this paper. The LMD has been designed to be able to move the auxiliary damper mass of 155kg up to $\pm$250mm stroke. A series of performance tests for LMD control system with $H_{winfty}$ robust controller have been carried out on the full-scale steel frame structure. Through the performance tests, it is confirmed that vibration response levels are reduced down 10dB for the first and second modes of the test structure.

• Journal of Korean Academy of Nursing
• /
• v.7 no.1
• /
• pp.10-19
• /
• 1977

Trust is an essential factor in human relations, as it enables man to accept and also disclose self. Today's health care demands nursing personnel with high level of trust . This study was designed and carried out in May through June, 1976 to measure the level of trust on nurses through the trust scale of Nurses (75- N) made by Kenneth et al. and the Parent Inventory made by Rake and to provide data for management of nursing personnel. 150 junior nursing students, 164 professional nurses from 5 universities and their medical centers and 55 nurse- educators from 8 baccalaureate nursing programs in Seoul were randomly sampled. Results are as follows : 1. The rank order of the level of trust revealed that nurse educators the highest and nursing students the lowest. 2. The level of trust revealed to be influenced by the relationship with parents at the early stages of life ; Group who appeared to have shared intimacy with their parents were the highest. 3. Factors such as ; number of siblings and birth order among them, religious affiliation, parental presence revealed to have had no influence on the level of trust in all three group. 4. No significant difference were revealed between the group who had put their names down on the questionnaire and the others. 5. Clinical specialities of practice revealed to have no signigicant influence on trust in nurses. 6. Marital status revealed to have significant influence : in nurses and nurse- educators, the mastered re vented to have significantly higher level of trust. (difference by Recommendations : 1. A study on trust level of patients and Nurses in Nurse- patient Relationship. 2. A longitudinal study to investigate the influence of Nursing education on the development of trust in Nurses are recommended. 3. A comparative study on trust level of students of Nursing & non- Nursing major.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.38.2-38.2
• /
• 2016

The mapping of dark matter clustering from real to redshift spaces introduces the anisotropic property to the measured density power spectrum in redshift space, known as the Redshift Space Distortion (hereafter RSD) effect. The mapping formula is intrinsically non-linear, which is complicated by the higher order polynomials due to the indefinite cross correlations between the density and velocity fields, and the Finger-of-God (hereafter FoG) effect due to the randomness of the peculiar velocity field. Furthermore, the rigorous test of this mapping formula is contaminated by the unknown non-linearity of the density and velocity fields, including their auto- and cross-correlations, for calculating which our theoretical calculation breaks down beyond some scales. Whilst the full higher order polynomials remains unknown, the other systematics can be controlled consistently within the same order truncation in the expansion of the mapping formula, as shown in this paper. The systematic due to the unknown non-linear density and velocity fields is removed by separately measuring all terms in the expansion using simulations. The uncertainty caused by the velocity randomness is controlled by splitting the FoG term into two pieces, 1) the non-local FoG term being independent of the separation vector between two different points, and 2) the local FoG term appearing as an indefinite polynomials which is expanded in the same order as all other perturbative polynomials. Using 100 realizations of simulations, we find that the best fitted non-local FoG function is Gaussian, with only one scale-independent free parameter, and that our new mapping formulation accurately reproduces the observed power spectrum in redshift space at the smallest scales by far, up to k ~ 0.3 h/Mpc, considering the resolution of future experiments.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.1
• /
• pp.64-69
• /
• 1992

To examine the effects of blanching treatments on the drying of hot red pepper, the pilot scale hot-air dryer equipped with the weight sensor using strain gauge type load cell and strain amplifier was designed and manufactured. The drying characteristic curves of cut hot red pepper showed a settling down period followed by a constant rate period and falling rate period, but blanched hot red pepper showed only falling rate period. According as the blanching time and temperature rises, the drying rates and the capsanthin contents of hot red pepper fairly increased. Considering the drying rates and the color values of dried hot red pepper, we suggest the desirable blanching condition of hot red pepper should be water blanching at $80^{\circ}C$ for 3 mins.