• 한국안전학회지
• /
• 제20권4호
• /
• pp.46-53
• /
• 2005

Existing study far fire-resistant concrete has been done already. but it is not found out how the waste tyre mixing concrete will be acted against fire. This waste tyre concrete molds under the condition of $0^{\circ}C,\;200^{\circ}C,\;400^{\circ}C,\;600^{\circ}C$ were heated in gas oven. It was worried about that they might be fractured down at about $800^{\circ}C$ so that they can not be tested. compressive strength for the test molds are made with commercially used $180kg/cm^2,\;210kg/cm^2,\;240kg/cm^2,\;270kg/cm^2$ mixing saw dust with proportion such as 0.05%, 0.1%, 0.2%, 0.4%, 0.6%, 0.8%, 1.0%, 1.2%, 1.4%, 1.6%, 1.8%, 2.0% compressive strength at $200^{\circ}C$ was approximately 20% from the original, while approximately 30% deoreased at $400^{\circ}C$. their results are not quite different from the normal concrete condition even though they contains saw dust in it. The higher strength the concrete has, the less strength was decreased. There are almost no difference in strength under the condition of less than $400^{\circ}C$, but damage of concrete structure could be considerable large with more than $400^{\circ}C$.

• 한국응용과학기술학회지
• /
• 제15권1호
• /
• pp.79-90
• /
• 1998

One of the objectives of this study were to develop a process for manufacturing activated carbons from agricultural by-products(rice shells and saw dust) and another is to measure the iodine number, ash content and removal ratio of COD. The other is to compare those values with those of commercialized activated carbons. Agricultural by-products based activated carbons were manufactured through the steam-reaction method. A rotary kiln type furnace was used for both carbonization and activation. The optimum operating temperatures for carbonization and activation were $650^{\circ}C$ and $900^{\circ}C$, respectively. For the activated carbons produced under these conditions, the iodine number was 1,127mg/g. Especially, removal efficiency of COD was 61.5% for 40mg/L of wastewater and 30% for 150mg/L of SLS(Sodium Lauryl Sulfate).

• 공업화학
• /
• 제22권1호
• /
• pp.77-80
• /
• 2011

본 연구에서는 볏짚, 톱밥, 밤껍질, 땅콩껍질 등 목질계 바이오매스를 이용하여 전처리과정으로 산처리과정을 진행한 후 리그닌 함량변화를 측정하고, 이에 따른 셀룰로오스 에탄올로의 전환특성을 해석하였다. 목질계 바이오매스의 리그닌 함량을 측정한 결과 밤껍질 < 볏짚 < 톱밥 < 땅콩껍질 순으로 리그닌 함량이 높게 측정되었으며, 셀룰로오스 에탄올로의 전환특성은 땅콩껍질 < 톱밥 < 볏짚 < 밤껍질 순으로 우수한 것으로 나타나 산처리과정으로 리그닌의 제거가 필요한 것으로 나타났다. 또한 산처리과정에서 황산의 농도가 증가함에 따라 리그닌 함량이 감소하여 셀룰로오스 에탄올의 수율은 증가하였으며, 최적 황산의 농도는 20 wt%로 선정하였다.

• 한국버섯학회지
• /
• 제13권3호
• /
• pp.228-232
• /
• 2015

모본 ASI 3305mut와 L5(3265-238701-2)-16을 2011년에 교잡하여, 2012년부터 2013년까지 생산력 검정시험을 통해 PM-L5(농진고)를 출원하였다. 농진고의 균사배양 최적온도는 $30^{\circ}C$이며, 버섯 발생온도는 $15{\sim}23^{\circ}C$로 중고온성이다. 자실체의 갓은 평반구형이며 색깔은 황갈색이고, 인피는 갓의 둘레에 생긴다. 버섯의 배양은 1.5kg 배지에서 최소 90~100일이 소요되며, 갈변이 다소 늦은 편이다. 버섯 발생형은 집중형이나 산조701에 비하여 초기 발생이 다소 늦으면서 개체수가 10개 내외이고, 주기별 발생이 고른 편이다. 톱밥 봉지재배 품종으로 지면 재배, 균상재배에서 모두 적합하다.

• 원예과학기술지
• /
• 제19권4호
• /
• pp.585-590
• /
• 2001

본 연구는 강원도 평창의 고랭지에서 1998년 5월부터 10월까지 백합의 생육 향상과 우량구근 생산을 위해 여러 가지 피복재를 재배에 이용하였다. 피복처리재는 톱밥, 흑색필름, 반사필름, 투명필름, 그리고 백흑이중필름을 사용하였다. 백합 공시 품종은 일본 수출에 유리한 'Casablanca'와 'Marco Polo'를 재식하였다. 흑색필름과 백흑이중필름 피복재배는 백합 잎의 생장과 발육을 지연시켰다. 피복재배는 'Casablanca' 품종의 지상부 생체중을 증가시켰다. 구근생장은 흑색필름과 백흑이중필름 피복구를 제외한 처리구는 무처리구와 유사한 구근 생육상을 보여주었다. 톱밥과 반사필름 피복재배가 무처리구와 다른 피복처리구보다 백합 지상부 생육, 지하부 생육, 그리고 구근생육에 유리하였다. 흑색필름은 지상부와 지하부 생육, 그리고 개화 향상에 적합하지 않은 것으로 조사되었다. 투명필름처리와 백흑이중필름은 백합재배 시 무처리구와 비교하여 지상부생육과 구근 생산에 뚜렷한 증진 효과가 없었다. 한편 피복재가 대체적으로 생육을 지연시키는 효과가 있어 관행수확기보다 수확기를 다소 늦추는 것이 백합 구근생산에 유리할 것으로 판단된다.

• Asian Journal of Atmospheric Environment
• /
• 제8권1호
• /
• pp.15-24
• /
• 2014

The capital city of Himalayan Country Nepal, Kathmandu Valley is surrounded by consecutive high mountains, which limits the air distribution and mixing effects significantly. It in turn generates steady air flow pattern over a year except in monsoon season. The air shed in the Valley is easily trapped by the surrounded mountains and the inversion layer formulated as the cap. The $PM_{10}$ concentration was noticeably higher than the standard level (120 ${\mu}g/m^3$) in urban and suburban area of Kathmandu valley for all seasons except monsoon period. The Valley area experiences similar wind patterns (W, WWS, and S) for a year but the Easterly wind prevails only during the monsoon period. There was low and calm wind blows during the winter season. Because of this air flow structure, the air emission from various sources is accumulated within the valley air, high level of air pollution is frequently recorded with other air polluted cities over the world. In this Valley area, brick kilns are recognized as the major air pollution source followed by vehicles. Mostly Bull Trench Kiln (BKT), Hoffman Kiln and Vertical Shaft Brick Kiln (VSBK) are in operation for brick firing in Kathmandu valley where the fuels such as crushed coal, saw dust, and natural gas are used for processing bricks in this study. Tool for the Reduction and Assessment of Chemical and Other Environmental Impacts (TRACI) was used for screening and quantifying the potential impacts of air emission from firing fuels. The total Environmental Performance Score (EPS) was estimated and the EPS of coal was approximately 2.5 times higher than those of natural gas and saw dust. It is concluded that the crushed coal has more negative impact to the environment and human health than other fuel sources. Concerning the human health and environment point of view, alternative environment friendly firing fuel need to be used for brick industry in the kiln and the air pollution control devices also need to be applied for minimizing the air emissions from the kilns.

• 한국균학회지
• /
• 제25권4호통권83호
• /
• pp.268-275
• /
• 1997

High prices of raw materials used as media for the mushroom cultivation increased the cost of commercial production of oyster mushroom (Pleurotus ostreatus). In this study, garlic peels (Allium sativum f. pekinese) as an agricultural by-product were investigated to replace the saw dust for the bottle cultivation of oyster mushroom. Mycelial growth of oyster mushroom were examined by the extracts made from the sawdust, rice bran and garlic peels. The mycelial growth was very poor in the agar media containing the extracts of sawdust or garlic peels, but was good when those of the rice bran were added. In the polypropylene bottle experiment, the sawdust medium which ammended with minerals vitamin was essential for the production of the mushroom fruitbodies. The rice bran was considered to stimulate the mycelial growth, but not the development of basidiocarps. The garlic peel was not a factor to stimulate the production of mushroom fruitbodies, but a raw material ammended with the rice bran produced much amounts of mushroom. In this work, garlic peels ($10{\sim}70%$ v/v) added to the mixture of sawdust and rice bran (4 : 1, v/v) was considered to help the productions of mushroom fruitbodies. Based on the result, the replacement of expensive saw dust with inexpensive garlic peels was a good example to reduce production cost of the bottle cultivation of mushroom.

• 한국환경보건학회지
• /
• 제24권1호
• /
• pp.112-119
• /
• 1998

The objective of this study was to investigate the effect of bulking agents including cow manure, saw dust and rice straw in the ripening of leather sludge for vermistabilization. The changes of the waste properties for ripening time for 50 days were observed according to the various mixture ratios of leather sludge and bulking agents. The pH values of the mixture wastes were decreased from 7.5-8.0 to 6.4-7.3 with the ripening time for 50 days, and it was indifferent of the mixture ratio and type of the bulking agent. The initial value of oxidation-reduction potential(Eh) of the mixture waste was a negative(-)value indicating an unfavorable condition for earthworm life, but the values of Eh were increased with the ripening time. The increase rate of Eh value was proportional to the mixture ratio of bulking agents, but the increase rate for saw dust was higher than that of the cow manure and the rice straw. The value of alkalinity was also changed into the favorable range for earthworm after 50 days except for 10% of the mixture ratio of the bulking agents. When the mixture ratios of the bulking agents were increased from 10% to 40%, the growth characteristics of earthworms were increased from 31.7% to 95% for the survival rate, 103% to 225% for the liveweight increase rate and 32% to 91% for hatching rate of the cocoons. It can be concluded that the proper content of the bulking agents in the leather sludge to ensure effective vermistabilization was over 30%, when the mixture was ripened during 50 days. The contents of heavy metals in the ripened sludge were lower than the other regulatory standards for compost.

• 한국균학회지
• /
• 제24권4호통권79호
• /
• pp.322-328
• /
• 1996

왕호장근(Reynoutria sachalinensis)은 국내에서 자라는 마디풀과에 속하는 다년생 잡초로써 단위 면적당 Biomass가 매우 높으므로 버섯재배의 첨가 기질로써 이용가능성을 시험하였다. 대조구인 malt extract agar보다 왕호장근 1/4 희석 배지에서 느타리 균사 생장이 우수하였으며 1/8 희석 배지에서는 대조구보다 3배나 균사생장이 빨랐으며 균총의 밀도도 매우 높았다. 또한 느타리 균사가 왕호장근 한천배양기의 최적 산도 및 희석비율을 알아본 결과 pH 6.5, 희석비율 1/8이 느타리 균사생장에 가장 적합하였다. 왕호장근, 톱밥 및 미강를 각각 혼합하여 균사생장을 비교하여 본 결과 왕호장근을 넣은 배지에서 느타리 생강이 우수하게 나타났으며 1.5 내지 2배의 균사생장을 보였다. 왕호장근 한천배양기의 희석비율 l/4, 1/8와 pH 4.5, 6.5, 8.5에서 느타리 균사와 Trichoderma sp.의 대칭배양에서 산도 및 희석농도와 관계없이 느타리 균사생장이 월등하게 나타났으며 Trichoderma sp.의 균사생장을 억제하였다. 왕호장근, 톱밥, 미강을 혼합하여 종균 제조시 톱밥+왕호장근 10%+미강 10%의 배지에서 균사활착이 대조구보다는 4내지 5일 빨랐으며 2배 이상의 균사생장을 보였고 균사의 밀도도 가장 우수하였다.

• Korean Chemical Engineering Research
• /
• 제50권1호
• /
• pp.76-82
• /
• 2012

볏짚 톱밥과 같은 바이오매스는 석탄과 함께 사용할 수 있는 잠재력이 큰 에너지원으로 이들을 가스화공정에 적용하면 수송용 연료같은 bio-oil을 생산할 수 있다. 본 연구에서는 상압의 열천칭 반응기(thermobalance)에서 톱밥, 볏짚, 갈탄, 역청탄, 무연탄의 수증기 가스화 반응특성을 수행하였으며, 가스화 온도 $600{\sim}850^{\circ}C$, 수증기 분압 30~90 kPa의 범위에서 조업변수들이 가스화반응속도에 미치는 영향을 조사하였다. 세 가지의 기체-고체 화학반응모델이 가스화반응의 거동을 예측하는 능력을 비교하였으며, modified volumetric reaction model을 사용하여 공정설계에 필수적인 kinetic 정보를 도출하였다. 두 가지 바이오매스와 세 가지 석탄 촤의 가스화반응성을 비교하였다. Arrhenius plot으로부터 얻어진 바이오매스와 석탄의 활성화에너지는 모두 문헌상의 범위에 속하였다. 각 연료에 대하여 수증기분압에 대한 반응차수를 결정하였으며, 가스화공정 설계의 기초데이타로서 겉보기 반응속도식을 제시하였다.